Tech Tip #56 - Care of Gages

  • Clean the part before gaging. Get rid of dirt and chips so the gage is checking product size that is not affected by debris.
  • Keep the gage clean and lightly oiled, both in use and storage. Light oil will greatly increase wear life. It also helps to prevent "loading" or "smearing" of product material onto gage threads. There can, of course, be some circumstances or materials where oil is not recommended.
  • Align and start threads carefully. Cross-threading can damage end threads of both product and gage.
  • Don't force the gage. Use reasonable light pressure only. Use common sense to prevent damage or wear on the gage and to correctly evaluate acceptance or rejection of parts.
  • Protect gages from damage, rust, nicks, or jams that could ruin the gage and allow inaccurate results. Furnish some kind of protective box at the workbench. Seal/peel plastic dip on gage threads is recommended when storing the gage.
  • Use thread ring gages equally from both faces. Many times ring gages, submitted for reinspection or reconditioning, are found to be worn/tapered only on the stamped side. The ring is designed for use on either face. Alternating gage face use will prolong the wear life.
  • Gages must be checked/recalibrated periodically to ensure they are still within proper tolerances and in suitable condition for continued usage.
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

Product data

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material NumberISO Catalog NumberGrade  

You are about to leave the Solution building process.

Are you sure you want to leave?