Drill Fix DFT • Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (92)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(92)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(92)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(92)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(86)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(86)
- M Stainless Steel (90)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(90)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(90)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(90)
- K Cast Iron (86)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(86)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(86)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(86)
- N Non-Ferrous Materials (87)
- N1Wrought Aluminum (87)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(87)
- N3High-Silicon Aluminum Alloys Si >12.2%(83)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (81)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (87)
- N6Carbon, Graphite Composites, CFRP (81)
- N7MMC's (64)
- S High-Temp Alloys (87)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(81)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(81)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(87)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(87)
- H Hardened Materials (6)
- H1Hardened Materials 44-48 HRC(6)
- H2Hardened Materials 48-55 HRC(6)
- H3Hardened Materials 56-60 HRC(6)
- H4Hardened Materials >60 HRC(6)
Select First Choice
- BR (17)
- CN (28)
- DE (28)
- GB (27)
- IN (30)
- SG (24)
- US (31)
Cutting Condition
Cutting Condition
- Interrupted (72)
- Stable (91)
- Unstable (84)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (5)
- 3.0 (106)
to
Corner Radius
Corner Radius
- 0.016 in(35)
- 0.024 in(2)
- 0.031 in(65)
- 0.034 in(9)
to
Corner Radius
Corner Radius
- 0.4 mm(35)
- 0.601 mm(2)
- 0.8 mm(65)
- 0.851 mm(9)
to
Application
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7140 (22)
- KC720 (8)
- KC7215 (2)
- KCMS35 (8)
- KCPK10 (12)
- KCU25 (21)
- KCU40 (27)
- KD1425 (5)
- KMF (6)
Insert Geometry
Insert IC Size
Insert IC Size
- 5.0 mm(7)
- 6.0 mm(28)
- 8.0 mm(17)
- 10.0 mm(18)
- 12.0 mm(17)
- 15.0 mm(15)
- 17.6 mm(9)
to
Insert IC Size
Insert IC Size
- 0.197 in(7)
- 0.237 in(28)
- 0.315 in(17)
- 0.394 in(18)
- 0.473 in(17)
- 0.591 in(15)
- 0.694 in(9)
to
Cutting Edge Length
Cutting Edge Length
- 3.301 mm(7)
- 3.975 mm(28)
- 5.2 mm(1)
- 5.301 mm(16)
- 6.525 mm(1)
- 6.625 mm(17)
- 7.851 mm(1)
- 7.95 mm(16)
- 9.826 mm(1)
- 9.925 mm(14)
- 11.525 mm(1)
- 11.625 mm(4)
- 11.65 mm(4)
to
Cutting Edge Length
Cutting Edge Length
- 0.13 in(7)
- 0.156 in(28)
- 0.206 in(1)
- 0.209 in(16)
- 0.257 in(1)
- 0.261 in(17)
- 0.309 in(1)
- 0.313 in(16)
- 0.387 in(1)
- 0.391 in(14)
- 0.454 in(1)
- 0.458 in(4)
- 0.459 in(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- DS (6)
- GD (23)
- HD (4)
- HP (40)
- LD (6)
- MD (27)
Cutting Tool Material
Cutting Tool Material
- D P (5)
- H W (106)
No filters matching ""
