Taladrado: ConvexoDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 1198724 |
| Referencia ISO | B501Z04000 |
| Referencia ANSI | B501Z04000 |
| Calidad | K10 |
| Diámetro de broca M [D1] | 4 mm |
| Diámetro de broca M [D1] | .1575 in |
| Longitud total [L] | 54 mm |
| Longitud total [L] | 2.126 in |
| Profundidad máxima de taladrado [L4] | 6.5 mm |
| Profundidad máxima de taladrado [L4] | .2559 in |
| Longitud de mango [LS] | 33 mm |
| Longitud de mango [LS] | 1.299 in |
| Adaptador/Mango/Diá int [D] | 6 mm |
| Adaptador/Mango/Diá int [D] | .2362 in |
Taladrado: ConvexoGrades
K10
Composición: Metal duro de grano fino con alta resistencia al desgaste y sin recubrir con propiedades de dureza en caliente mejoradas.
Aplicación: Más adecuado para aplicaciones con refrigerante para caudal exterior y secas en materiales para el sector aeroespacial como materiales resistentes a altas temperaturas y aleaciones de aluminio forjado. Debido a su alta resistencia al desgaste, esta calidad es también adecuada para mecanizado de fundición a velocidades bajas a medias.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Tolerancia • Sistema métrico | ||
| D1 | Tolerancia h8 + / - | Tolerancia h6 + / - |
| 0,000/-0,018 | 0,000/-0,008 | |
| 0,000/-0,022 | 0,000/-0,009 | |
| 0,000/-0,027 | 0,000/-0,011 | |
| Tolerancia • Pulgadas | ||
| D1 | Tolerancia h8 + / - | Tolerancia h6 + / - |
| .0000/-.0007 | .0000/-.0003 | |
| .0000/-.0009 | .0000/-.0004 | |
| .0000/-.0011 | .0000/-.0004 | |
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 50 | 65 | 100 | mm/r | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 |
| 1 | 40 | 55 | 80 | mm/r | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 2 | 40 | 55 | 80 | mm/r | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 3 | 40 | 55 | 80 | mm/r | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 4 | 40 | 55 | 80 | mm/r | 0,05–0,08 | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,22 | 0,16–0,24 | |
| 5 | 30 | 40 | 60 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,14 | 0,12–0,18 | 0,14–0,20 | |
| 6 | 30 | 40 | 60 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,14 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 30 | 35 | 50 | mm/r | 0,04–0,07 | 0,05–0,09 | 0,06–0,11 | 0,80–0,13 | 0,09–0,15 | 0,10–0,17 | 0,11–0,20 | 0,12–0,23 |
| 2 | 30 | 40 | 50 | mm/r | 0,03–0,05 | 0,04–0,08 | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,14 | 0,09–0,17 | 0,10–0,20 | |
| 3 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,08 | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,14 | 0,09–0,17 | 0,10–0,20 | |
| K | 1 | 60 | 90 | 120 | mm/r | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 |
| 2 | 60 | 80 | 100 | mm/r | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 | |
| 3 | 60 | 90 | 120 | mm/r | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 | |
| N | 1 | 90 | 230 | 270 | mm/r | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 |
| 2 | 90 | 220 | 270 | mm/r | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| 3 | 90 | 180 | 225 | mm/r | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| 4 | 90 | 130 | 270 | mm/r | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| S | 1 | 20 | 25 | 30 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 |
| 2 | 10 | 20 | 30 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
| 3 | 20 | 25 | 40 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
| 4 | 20 | 25 | 50 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
| Grupo de materiales | | | |||||||||||
| Velocidad de corte — vc | Pulgadas | ||||||||||||
| Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
| P | 0 | 160 | 210 | 330 | IPR | 0.002-0.004 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.011 |
| 1 | 130 | 180 | 260 | IPR | 0.002-0.004 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.011 | |
| 2 | 130 | 180 | 260 | IPR | 0.002-0.004 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.011 | |
| 3 | 130 | 180 | 260 | IPR | 0.002-0.004 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.011 | |
| 4 | 130 | 180 | 260 | IPR | 0.002–0.003 | 0.002-0.004 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.009 | 0.006-0.009 | |
| 5 | 100 | 130 | 200 | IPR | 0.001-0.002 | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.003-0.005 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | |
| 6 | 100 | 130 | 200 | IPR | 0.001-0.002 | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.003-0.005 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | |
| M | 1 | 100 | 110 | 160 | IPR | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.032–0.005 | 0.004-0.006 | 0.004-0.007 | 0.004–0.008 | 0.005-0.009 |
| 2 | 100 | 130 | 160 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.005 | 0.003-0.006 | 0.004-0.007 | 0.004–0.008 | |
| 3 | 80 | 100 | 130 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.005 | 0.003-0.006 | 0.004-0.007 | 0.004–0.008 | |
| K | 1 | 200 | 300 | 390 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.010 | 0.008-0.012 |
| 2 | 200 | 260 | 330 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.010 | 0.008-0.012 | |
| 3 | 200 | 300 | 390 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.005-0.007 | 0.006-0.008 | 0.006-0.009 | 0.007-0.010 | 0.008-0.012 | |
| N | 1 | 300 | 750 | 890 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.007 | 0.005-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.013 | 0.009-0.015 |
| 2 | 300 | 720 | 890 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.007 | 0.005-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.013 | 0.009-0.015 | |
| 3 | 300 | 590 | 740 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.007 | 0.005-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.013 | 0.009-0.015 | |
| 4 | 300 | 430 | 890 | IPR | 0.002-0.005 | 0.003-0.006 | 0.004-0.007 | 0.005-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.013 | 0.009-0.015 | |
| S | 1 | 70 | 80 | 100 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004–0.008 |
| 2 | 30 | 70 | 100 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004–0.008 | |
| 3 | 70 | 80 | 130 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004–0.008 | |
| 4 | 70 | 80 | 160 | IPR | 0.001-0.002 | 0.002–0.003 | 0.002-0.004 | 0.002-0.004 | 0.003-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004–0.008 | |
| | ||||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 50 | 65 | 100 | mm/dev | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 |
| 1 | 40 | 55 | 80 | mm/dev | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 2 | 40 | 55 | 80 | mm/dev | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 3 | 40 | 55 | 80 | mm/dev | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,24 | 0,18–0,28 | |
| 4 | 40 | 55 | 80 | mm/dev | 0,05–0,08 | 0,05–0,10 | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,22 | 0,16–0,24 | |
| 5 | 30 | 40 | 60 | mm/dev | 0,03–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,14 | 0,12–0,18 | 0,14–0,20 | |
| 6 | 30 | 40 | 60 | mm/dev | 0,03–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,14 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 30 | 35 | 50 | mm/dev | 0,04–0,07 | 0,05–0,09 | 0,06–0,11 | 0,80–0,13 | 0,09–0,15 | 0,10–0,17 | 0,11–0,20 | 0,12–0,23 |
| 2 | 30 | 40 | 50 | mm/dev | 0,03–0,05 | 0,04–0,08 | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,14 | 0,09–0,17 | 0,10–0,20 | |
| 3 | 25 | 30 | 40 | mm/dev | 0,03–0,05 | 0,04–0,08 | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,14 | 0,09–0,17 | 0,10–0,20 | |
| K | 1 | 60 | 90 | 120 | mm/dev | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 |
| 2 | 60 | 80 | 100 | mm/dev | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 | |
| 3 | 60 | 90 | 120 | mm/dev | 0,06–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | 0,18–0,26 | 0,20–0,30 | |
| N | 1 | 90 | 230 | 270 | mm/dev | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 |
| 2 | 90 | 220 | 270 | mm/dev | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| 3 | 90 | 180 | 225 | mm/dev | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| 4 | 90 | 130 | 270 | mm/dev | 0,06–0,13 | 0,08–0,15 | 0,10–0,18 | 0,12–0,25 | 0,15–0,28 | 0,18–0,32 | 0,20–0,34 | 0,22–0,38 | |
| S | 1 | 20 | 25 | 30 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 |
| 2 | 10 | 20 | 30 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
| 3 | 20 | 25 | 40 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
| 4 | 20 | 25 | 50 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,06–0,10 | 0,07–0,11 | 0,08–0,13 | 0,09–0,16 | 0,10–0,20 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?