Kennametal Conforma Clad™ offers custom-engineered power generation solutions for coal-fired or biomass power plants. Our cladding formulas are designed to protect equipment from multiple modes of wear including abrasion, corrosion, erosion or all three combined.
This proprietary cladding technology can be applied to a broad range of applications including:
With Conforma Clad tungsten carbide cladding, you can stop the wear. As part of a research project conducted by a large coal fired power generation utility and the Electric Power Research Institute (EPRI), blades from six different suppliers were examined so metal loss could be measured.
The EPRI field trials showed that 1/16” of Conforma Clad cladding provides equivalent resistance to 1” of chrome carbide weld overlay at 1/10th the weight and 3” of carbon steel at 1/30th the weight.
Significantly extend fan life and reduce unplanned downtime
Fan failures triggered by high velocity ash impingement often result in reduced gas flow and fan efficiency, sudden fan imbalance, and catastrophic detachment of blades. Conforma Clad infiltration-brazed tungsten carbide wear protection has helped operators increase fan runtimes by more than 4x.
EPRI testing results (EPRI CS-6068, Project 1649-4) show that Kennametal’s WC-210 provides superior erosion protection for power boiler fan blades exposed to high-velocity bituminous coal fly ash.
Significantly thinner and lighter in comparison to chrome carbide overlay, cladding can also be applied to leading and trailing fan edges, centerplate weldment areas, and fan inlet hubs, protecting the entire fan and improving overall efficiency. With superior erosion resistance-to-weight ratio, cladded fans resist chipping and spalling.
40° Impingement Angle, 550 ft/sec - 30 Minute Test
Certified by the National Board of Boiler & Pressure Vessel Inspectors, Conforma Clad protects replacement boiler tube segments from severe wear, reducing the risk of boiler tube leaks.
Conforma Clad tube shields are available as an alternative to direct cladded boiler tubes.
Conforma Clad protected burner components last longer and sustain maximum performance levels by maintaining critical component geometries for extended run times.
“Riley Power conducted laboratory testing, following ASTM G73 standards, on low swirl coal spreaders to determine the best erosion protection from fine-grit black beauty coal slag. Testing was conducted at 90-degree impingement angle with a particle velocity of 240ft/sec for 30 minutes.
Kennametal WC 219 cladding provided top wear projection while retaining critical component geometries. Kennametal increased Riley Power’s low-swirl coal spreader’s life from 1-2 years to 3-4 years.”
-Babcock Power, CCV-DAZ Development Project.
The Conforma Clad process provides complete protection of entire screens - up to 4 x 12’ with screen openings ¼” and larger - with metallurgically bonded tungsten carbide cladding. Common screen types include perf plates, woven mesh, wedge wire and grates.
For Power Gen customers, a number of Conforma Clad solutions can be employed to resolve multiple issues in their specific application as is outlined in our Conforma Clad™ Solutions for Economizer to SCR application bulletin.
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
?hei=300)
?hei=300)
?hei=300)
?hei=300)
