KSEM Modular Drill for the Intermediate Diameter Range

The KSEM modular drill covers drilling applications in a diameter range of 12,5-40mm (.4921 – 1.5748”) up to 10xD. KSEM enables maximum feed rates for highest productivity.

With four large contact surfaces, the insert pocket seat provides maximum stability, even in challenging conditions like stacked plates, cross holes, and inclined exits.

The central locking screw mechanism ensures secure clamping of the insert, resulting in process safety and long tool life for both the drill body and the insert. Material specific point geometries provide versatility in a wide range of materials.

The KSEM carbide inserts can be reconditioned, further extending the tool life, reducing tool inventory and tool cost.

Internal coolant supply directly to the cutting zone, for extended tool life and efficient chip evacuation.

  • HPCCL geometry for cast iron. With corner chamfer for wear protection and smooth hole exit. Four margin lands for perfect hole straightness.
  • HPG geometry for alloyed steels. With straight cutting edge for maximum stability in short chipping steels and interrupted cuts.
  • HP geometry for long chipping steels. With curved cutting edge for optimum chip formation.
  • HPL geometry for stainless steels. The innovative cutting geometry creates two chips in each chip flute for perfect chip evacuation.
  • PC geometry for piloting in all materials.
  • FEG geometry for flat bottom hole drilling, and piloting on inclined entries in steels and cast iron.
  • SPL geometry for low cutting forces in high temperature alloys, and non-ferrous materials. Four-facet geometry with four margin lands for perfect centering and hole straightness.
Select Filters
Filters
    View filters in
    Metric
    Inch
    Workpiece Material
    Workpiece Material
    Select First Choice
    • BR (111)
    • CN (265)
    • DE (245)
    • GB (200)
    • IN (189)
    • SG (161)
    • US (258)
    Applications
    Applications
    • CountersinkingCountersinking (41)
    • DrillingDrilling (593)
    • Inclined Entry DrillingInclined Entry Drilling (548)
    • Inclined Exit DrillingInclined Exit Drilling (548)
    • Stacked Plates DrillingStacked Plates Drilling (548)
    Cutting Diameter
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach MintoReach Max
    Reach
    Reach MintoReach Max
    Connection Style
    Connection Style
    • Cylindrical Shank 2 Flats (125)
    • KSEM Chamfer Ring Connection (28)
    • Straight-Cylindrical (196)
    • Whistle Drive 2 (44)
    • Whistle Notch 2 (200)
    Number of Flutes
    Number of Flutes
    • 2 (591)
    • 4 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L] MintoOver All Length [L] Max
    Corner Radius
    Corner Radius
    • 0.008 in(12)
    Corner Radius
    Corner Radius
    • 0.2 mm(12)
    Corner Chamfer
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer MintoCorner Chamfer Max
    No filters matching ""

    For any technical inquiries, please reach out to us via our Customer Support center

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)