Machining Two Materials Simultaneously with Mill 4™-12KT Tangential Shoulder Mill

The versatile Mill 4-12KT covers many shoulder milling applications which we're about to show you. Now don't try this at home, but Jake's put this block of steel and block of cast iron side by side in the same vise, and now we're gonna cut these two materials at the same time.

Cutting Steel and Cast Iron at the Same Time

First, we'll do a circumferential cut with a three-millimeter depth of cut. We're starting on the side of the cast iron block then continuing all around the steel block and finishing on the cast iron block again.

Now it's going to get really wild. We're going to take a full slot with half of the cutter being engaged in steel and the other half in cast iron.

Finally, we're going to take a five-millimeter depth of cut full slot through the cast iron block first. Then, continue right through the steel block.

Thanks for checking out the Mill 4-12KT with me here in the technology lab at Kennametal.

You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material NumberISO Catalog NumberGrade  

You are about to leave the Solution building process.

Are you sure you want to leave?