Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

HARVI™ Ultra 8X • IC12

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (38)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(30)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(30)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(30)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(38)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(38)
    • M Stainless Steel (38)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(38)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(38)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(38)
    • K Cast Iron (31)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(31)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(31)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(31)
    • S High-Temp Alloys (38)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(36)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(36)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(36)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(38)
    • H Hardened Materials (24)
      • H1
        Hardened Materials 44-48 HRC(24)
    Vybrat první volbu
    • CN (4)
    Applications
    Applications
    • Face MillingFace Milling (24)
    • PocketPocket (1)
    • Pocket MillingPocket Milling (1)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (1)
    • Shoulder MillingShoulder Milling (24)
    • Shoulder RoughingShoulder Roughing (24)
    • Slot MillingSlot Milling (24)
    • Slot Square EndSlot Square End (24)
    Cutting Diameter
    Cutting Diameter
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.48 in(4)
    • 2.5 in(2)
    • 3.0 in(11)
    • 3.15 in(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 63.0 mm(4)
    • 63.5 mm(2)
    • 76.2 mm(11)
    • 80.0 mm(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 50.875 mm(2)
    • 60.776 mm(1)
    • 61.0 mm(1)
    • 70.95 mm(1)
    • 72.0 mm(1)
    • 77.525 mm(1)
    • 77.551 mm(1)
    • 81.176 mm(1)
    • 81.2 mm(1)
    • 101.5 mm(1)
    • 101.625 mm(1)
    • 102.2 mm(3)
    • 102.226 mm(1)
    • 132.9 mm(1)
    • 133.675 mm(2)
    • 134.451 mm(1)
    • 184.851 mm(2)
    • 236.05 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 2.003 in(2)
    • 2.394 in(1)
    • 2.402 in(1)
    • 2.793 in(1)
    • 2.835 in(1)
    • 3.052 in(1)
    • 3.053 in(1)
    • 3.196 in(1)
    • 3.197 in(1)
    • 3.996 in(1)
    • 4.001 in(1)
    • 4.024 in(3)
    • 4.025 in(1)
    • 5.232 in(1)
    • 5.263 in(2)
    • 5.293 in(1)
    • 7.279 in(2)
    • 9.294 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 2.953 in(2)
    • 3.0 in(1)
    • 3.5 in(3)
    • 3.543 in(1)
    • 3.74 in(3)
    • 4.437 in(1)
    • 4.5 in(2)
    • 4.529 in(2)
    • 5.0 in(1)
    • 5.404 in(1)
    • 5.421 in(1)
    • 6.11 in(1)
    • 6.152 in(1)
    • 7.655 in(2)
    • 9.592 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 75.0 mm(2)
    • 76.2 mm(1)
    • 88.9 mm(3)
    • 90.0 mm(1)
    • 95.0 mm(3)
    • 112.7 mm(1)
    • 114.301 mm(2)
    • 115.0 mm(2)
    • 127.0 mm(1)
    • 137.225 mm(1)
    • 137.701 mm(1)
    • 155.201 mm(1)
    • 156.25 mm(1)
    • 194.425 mm(2)
    • 243.601 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (24)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (15)
    • BTF (8)
    • HSK (1)
    Number of Flutes
    Number of Flutes
    • 3 (3)
    • 4 (6)
    • 5 (15)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 4.0 (30)
    • 8.0 (38)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.953 in(2)
    • 3.0 in(1)
    • 3.5 in(3)
    • 3.543 in(1)
    • 3.74 in(3)
    • 4.5 in(2)
    • 4.529 in(2)
    • 5.0 in(1)
    • 6.891 in(1)
    • 7.5 in(2)
    • 8.031 in(1)
    • 9.215 in(1)
    • 9.5 in(2)
    • 11.5 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 75.0 mm(2)
    • 76.2 mm(1)
    • 88.9 mm(3)
    • 90.0 mm(1)
    • 95.0 mm(3)
    • 114.301 mm(2)
    • 115.0 mm(2)
    • 127.0 mm(1)
    • 175.0 mm(1)
    • 190.5 mm(2)
    • 204.0 mm(1)
    • 234.05 mm(1)
    • 241.3 mm(2)
    • 292.1 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.031 in(32)
    • 0.063 in(20)
    • 0.095 in(16)
    • 0.126 in(16)
    • 0.157 in(1)
    • 0.189 in(10)
    • 0.237 in(10)
    • 0.25 in(11)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.8 mm(32)
    • 1.6 mm(20)
    • 2.401 mm(16)
    • 3.2 mm(16)
    • 4.0 mm(1)
    • 4.801 mm(10)
    • 6.0 mm(10)
    • 6.351 mm(11)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC520M (25)
    • KC522M (24)
    • KC725M (26)
    • KCK15 (26)
    • KCK20B (26)
    • KCPK30 (26)
    • KCPM40 (26)
    • KCSM40 (33)
    Hand Of Tool
    Hand Of Tool
    • R (24)
    Wiper Insert
    Wiper Insert
    • N (20)
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (20)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(20)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(20)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 12.701 mm(20)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.5 in(20)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (9)
    • GDH (10)
    • LEH (1)
    Cutting Tool Material
    Cutting Tool Material
    • H W (20)
    Tolerance Class
    Tolerance Class
    • H (11)
    • P (9)
    backEnd
    Connection Type
    Connection Type
    • FLANGE ADAPTER (8)
    • SHELL MILL (15)
    • TAPER SHANK (1)
    System Size
    System Size
    • BTF46 (8)
    • HSK100A (1)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(1)
    • 22.0 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(3)
    • 31.75 mm(4)
    • 32.0 mm(3)
    • 100.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(1)
    • 0.866 in(2)
    • 1.0 in(2)
    • 1.063 in(3)
    • 1.25 in(4)
    • 1.26 in(3)
    • 3.938 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Inserts HARVI™ Ultra 8X • IC12
    (20)

    Inserts HARVI™ Ultra 8X • IC12

    Cutters HARVI™ Ultra 8X • IC12 • Inch
    (14)

    Cutters HARVI™ Ultra 8X • IC12 • Inch

    Cutters HARVI™ Ultra 8X • IC12 • Metric
    (10)

    Cutters HARVI™ Ultra 8X • IC12 • Metric

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk