Cutters Mill 4-11™ • Inch

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (30)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(30)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(30)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(30)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(30)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(30)
    • M Stainless Steel (30)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(30)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(30)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(30)
    • K Cast Iron (30)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(30)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(30)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(30)
    • N Non-Ferrous Materials (30)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(30)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(30)
      • N1
        Wrought Aluminum (30)
    • S High-Temp Alloys (30)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(30)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(30)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(30)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(30)
    • H Hardened Materials (30)
      • H1
        Hardened Materials 44-48 HRC(30)
    Applications
    Applications
    • Face MillingFace Milling (30)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (30)
    • Shoulder MillingShoulder Milling (30)
    • Shoulder RoughingShoulder Roughing (30)
    • Shoulder Square EndShoulder Square End (30)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(3)
    • 0.75 in(6)
    • 1.0 in(7)
    • 1.25 in(5)
    • 1.5 in(3)
    • 2.0 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(3)
    • 19.05 mm(6)
    • 25.4 mm(7)
    • 31.75 mm(5)
    • 38.1 mm(3)
    • 50.8 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.433 in(26)
    • 0.4331 in(4)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.0 in(3)
    • 1.1 in(6)
    • 1.25 in(1)
    • 1.5748 in(1)
    • 1.575 in(5)
    • 1.75 in(9)
    • 2.25 in(5)
    Reach MinkomuReach Max
    Reach
    Reach
    • 25.4 mm(3)
    • 27.94 mm(6)
    • 31.75 mm(1)
    • 40.0 mm(1)
    • 40.005 mm(5)
    • 44.45 mm(9)
    • 57.15 mm(5)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (8)
    • Screw-On Connection (3)
    • Straight-Cylindrical (12)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 2 (5)
    • 3 (7)
    • 4 (6)
    • 5 (6)
    • 6 (1)
    • 7 (3)
    • 8 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (30)
    • 4.0 (30)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(1)
    • 1.575 in(5)
    • 1.75 in(2)
    • 1.887 in(1)
    • 2.116 in(1)
    • 2.715 in(1)
    • 2.906 in(1)
    • 3.13 in(2)
    • 3.78 in(1)
    • 4.0 in(2)
    • 4.03 in(1)
    • 4.5 in(2)
    • 4.53 in(2)
    • 5.0 in(2)
    • 6.0 in(3)
    • 7.0 in(2)
    • 8.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(1)
    • 40.005 mm(5)
    • 44.45 mm(2)
    • 47.94 mm(1)
    • 53.75 mm(1)
    • 68.95 mm(1)
    • 73.81 mm(1)
    • 79.5 mm(2)
    • 96.01 mm(1)
    • 101.6 mm(2)
    • 102.36 mm(1)
    • 114.3 mm(2)
    • 115.06 mm(2)
    • 127.0 mm(2)
    • 152.4 mm(3)
    • 177.8 mm(2)
    • 203.2 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(30)
    • 0.031 in(30)
    • -0.039 in(30)
    • 0.047 in(30)
    • 0.063 in(30)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(30)
    • 0.8 mm(30)
    • -1.0 mm(30)
    • 1.2 mm(30)
    • 1.6 mm(30)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(30)
    • -1.0 mm(30)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(30)
    • -1.0 in(30)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (30)
    • KC520M (30)
    • KC522M (30)
    • KC725M (30)
    • KCK15 (30)
    • KCK20B (30)
    • KCPK30 (30)
    • KCPM40 (30)
    • KCSM30 (30)
    • KCSM40 (30)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.74 in(1)
    • 1.23 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 18.8 mm(1)
    • 31.25 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (19)
    • SCREW-ON (3)
    • SHELL MILL (8)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(2)
    • 15.875 mm(3)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(9)
    • 21.0 mm(1)
    • 25.4 mm(7)
    • 29.0 mm(1)
    • 31.75 mm(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.625 in(3)
    • 0.7087 in(1)
    • 0.75 in(10)
    • 0.827 in(1)
    • 1.0 in(7)
    • 1.142 in(1)
    • 1.25 in(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)