Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

High-Performance Aluminum Solid Carbide End Mills

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (266)
      • N1
        Wrought Aluminum (266)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(266)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(258)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (258)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (55)
    Applications
    Applications
    • PocketPocket (275)
    • Pocket HelicalPocket Helical (275)
    • Pocket MillingPocket Milling (275)
    • Pocket Plunge MillingPocket Plunge Milling (87)
    • RampingRamping (275)
    • Shoulder MillingShoulder Milling (275)
    • Shoulder RoughingShoulder Roughing (8)
    • Shoulder Square EndShoulder Square End (275)
    • Slot MillingSlot Milling (275)
    • Slot Square EndSlot Square End (275)
    Cutting Diameter
    Cutting Diameter
    • 0.079 in(1)
    • 0.119 in(2)
    • 0.125 in(6)
    • 0.157 in(3)
    • 0.188 in(7)
    • 0.197 in(3)
    • 0.237 in(9)
    • 0.25 in(26)
    • 0.313 in(4)
    • 0.315 in(9)
    • 0.375 in(31)
    • 0.394 in(13)
    • 0.438 in(2)
    • 0.473 in(14)
    • 0.5 in(49)
    • 0.551 in(2)
    • 0.625 in(11)
    • 0.63 in(13)
    • 0.709 in(1)
    • 0.75 in(36)
    • 0.787 in(11)
    • 0.984 in(6)
    • 1.0 in(16)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.0 mm(1)
    • 3.0 mm(2)
    • 3.176 mm(6)
    • 4.0 mm(3)
    • 4.775 mm(7)
    • 5.0 mm(3)
    • 6.0 mm(9)
    • 6.351 mm(26)
    • 7.95 mm(4)
    • 8.0 mm(9)
    • 9.525 mm(31)
    • 10.0 mm(13)
    • 11.125 mm(2)
    • 12.0 mm(14)
    • 12.701 mm(49)
    • 14.0 mm(2)
    • 15.875 mm(11)
    • 16.0 mm(13)
    • 18.0 mm(1)
    • 19.05 mm(36)
    • 20.0 mm(11)
    • 25.0 mm(6)
    • 25.401 mm(16)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.351 mm(2)
    • 7.926 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(2)
    • 9.0 mm(4)
    • 9.525 mm(4)
    • 10.0 mm(5)
    • 12.0 mm(6)
    • 12.701 mm(5)
    • 13.0 mm(1)
    • 14.0 mm(2)
    • 14.3 mm(4)
    • 15.0 mm(8)
    • 15.875 mm(6)
    • 16.0 mm(5)
    • 18.0 mm(8)
    • 19.0 mm(3)
    • 19.05 mm(9)
    • 20.0 mm(3)
    • 20.651 mm(1)
    • 22.0 mm(5)
    • 22.225 mm(9)
    • 24.0 mm(9)
    • 25.0 mm(4)
    • 25.401 mm(22)
    • 26.0 mm(3)
    • 28.576 mm(3)
    • 30.0 mm(6)
    • 31.701 mm(4)
    • 31.75 mm(18)
    • 32.0 mm(5)
    • 37.5 mm(4)
    • 38.0 mm(4)
    • 38.1 mm(17)
    • 41.276 mm(13)
    • 44.45 mm(3)
    • 45.0 mm(2)
    • 50.801 mm(13)
    • 53.975 mm(1)
    • 57.151 mm(15)
    • 63.5 mm(7)
    • 66.675 mm(1)
    • 76.2 mm(10)
    • 79.375 mm(1)
    • 82.551 mm(11)
    • 101.601 mm(3)
    • 104.775 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.25 in(2)
    • 0.312 in(1)
    • 0.313 in(1)
    • 0.315 in(2)
    • 0.354 in(4)
    • 0.375 in(4)
    • 0.394 in(5)
    • 0.473 in(6)
    • 0.5 in(5)
    • 0.512 in(1)
    • 0.551 in(2)
    • 0.564 in(4)
    • 0.591 in(8)
    • 0.625 in(6)
    • 0.63 in(5)
    • 0.709 in(8)
    • 0.748 in(3)
    • 0.75 in(9)
    • 0.787 in(3)
    • 0.814 in(1)
    • 0.866 in(5)
    • 0.875 in(9)
    • 0.946 in(9)
    • 0.984 in(4)
    • 1.0 in(22)
    • 1.024 in(3)
    • 1.125 in(3)
    • 1.181 in(6)
    • 1.248 in(4)
    • 1.25 in(18)
    • 1.26 in(5)
    • 1.476 in(4)
    • 1.496 in(4)
    • 1.5 in(17)
    • 1.625 in(13)
    • 1.75 in(3)
    • 1.772 in(2)
    • 2.0 in(13)
    • 2.125 in(1)
    • 2.25 in(15)
    • 2.5 in(7)
    • 2.625 in(1)
    • 3.0 in(10)
    • 3.125 in(1)
    • 3.25 in(11)
    • 4.0 in(3)
    • 4.125 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.25 in(2)
    • 0.312 in(1)
    • 0.313 in(1)
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(2)
    • 0.5 in(5)
    • 0.512 in(1)
    • 0.551 in(2)
    • 0.564 in(3)
    • 0.572 in(1)
    • 0.625 in(6)
    • 0.63 in(5)
    • 0.709 in(5)
    • 0.748 in(3)
    • 0.75 in(9)
    • 0.787 in(2)
    • 0.814 in(1)
    • 0.866 in(5)
    • 0.875 in(9)
    • 0.946 in(4)
    • 0.984 in(4)
    • 1.0 in(22)
    • 1.024 in(3)
    • 1.125 in(3)
    • 1.181 in(8)
    • 1.248 in(4)
    • 1.25 in(18)
    • 1.26 in(5)
    • 1.417 in(9)
    • 1.496 in(4)
    • 1.5 in(17)
    • 1.625 in(13)
    • 1.75 in(3)
    • 1.772 in(2)
    • 1.891 in(9)
    • 2.0 in(13)
    • 2.125 in(1)
    • 2.25 in(15)
    • 2.362 in(7)
    • 2.5 in(7)
    • 2.625 in(1)
    • 2.953 in(4)
    • 3.0 in(10)
    • 3.125 in(1)
    • 3.25 in(11)
    • 4.0 in(3)
    • 4.125 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 6.351 mm(2)
    • 7.926 mm(1)
    • 7.95 mm(1)
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(2)
    • 12.701 mm(5)
    • 13.0 mm(1)
    • 14.0 mm(2)
    • 14.3 mm(3)
    • 14.5 mm(1)
    • 15.875 mm(6)
    • 16.0 mm(5)
    • 18.0 mm(5)
    • 19.0 mm(3)
    • 19.05 mm(9)
    • 20.0 mm(2)
    • 20.651 mm(1)
    • 22.0 mm(5)
    • 22.225 mm(9)
    • 24.0 mm(4)
    • 25.0 mm(4)
    • 25.401 mm(22)
    • 26.0 mm(3)
    • 28.576 mm(3)
    • 30.0 mm(8)
    • 31.701 mm(4)
    • 31.75 mm(18)
    • 32.0 mm(5)
    • 36.0 mm(9)
    • 38.0 mm(4)
    • 38.1 mm(17)
    • 41.276 mm(13)
    • 44.45 mm(3)
    • 45.0 mm(2)
    • 48.0 mm(9)
    • 50.801 mm(13)
    • 53.975 mm(1)
    • 57.151 mm(15)
    • 60.0 mm(7)
    • 63.5 mm(7)
    • 66.675 mm(1)
    • 75.0 mm(4)
    • 76.2 mm(10)
    • 79.375 mm(1)
    • 82.551 mm(11)
    • 101.601 mm(3)
    • 104.775 mm(2)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (255)
    • Weldon (20)
    Number of Flutes
    Number of Flutes
    • 1 (8)
    • 2 (76)
    • 3 (191)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.496 in(1)
    • 1.5 in(2)
    • 1.575 in(2)
    • 1.969 in(4)
    • 2.0 in(9)
    • 2.244 in(5)
    • 2.362 in(2)
    • 2.441 in(1)
    • 2.48 in(8)
    • 2.5 in(23)
    • 2.677 in(3)
    • 2.835 in(4)
    • 2.953 in(3)
    • 2.992 in(9)
    • 3.0 in(43)
    • 3.25 in(6)
    • 3.269 in(13)
    • 3.307 in(1)
    • 3.5 in(8)
    • 3.504 in(1)
    • 3.622 in(4)
    • 3.938 in(9)
    • 4.0 in(45)
    • 4.094 in(5)
    • 4.5 in(3)
    • 4.529 in(6)
    • 4.764 in(2)
    • 5.0 in(24)
    • 5.25 in(5)
    • 5.315 in(4)
    • 5.5 in(2)
    • 6.0 in(13)
    • 6.25 in(1)
    • 6.496 in(1)
    • 7.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.0 mm(1)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(4)
    • 50.801 mm(9)
    • 57.0 mm(5)
    • 60.0 mm(2)
    • 62.0 mm(1)
    • 63.0 mm(8)
    • 63.5 mm(23)
    • 68.0 mm(3)
    • 72.0 mm(4)
    • 75.0 mm(3)
    • 76.0 mm(9)
    • 76.2 mm(43)
    • 82.551 mm(6)
    • 83.0 mm(13)
    • 84.0 mm(1)
    • 88.9 mm(8)
    • 89.0 mm(1)
    • 92.0 mm(4)
    • 100.0 mm(9)
    • 101.601 mm(45)
    • 104.0 mm(5)
    • 114.301 mm(3)
    • 115.0 mm(6)
    • 121.0 mm(2)
    • 127.0 mm(24)
    • 133.35 mm(5)
    • 135.0 mm(4)
    • 139.701 mm(2)
    • 152.4 mm(13)
    • 158.75 mm(1)
    • 165.0 mm(1)
    • 177.8 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • CHAMFER (8)
    • RADIUS (144)
    • SQUARE END (123)
    Corner Radius
    Corner Radius
    • 0.0 in(131)
    • 0.01 in(6)
    • 0.015 in(20)
    • 0.02 in(19)
    • 0.03 in(37)
    • 0.039 in(14)
    • 0.06 in(22)
    • 0.079 in(7)
    • 0.091 in(3)
    • 0.119 in(6)
    • 0.12 in(5)
    • 0.157 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(131)
    • 0.25 mm(6)
    • 0.375 mm(20)
    • 0.5 mm(19)
    • 0.75 mm(37)
    • 1.0 mm(14)
    • 1.5 mm(2)
    • 1.526 mm(20)
    • 2.0 mm(7)
    • 2.301 mm(3)
    • 3.0 mm(6)
    • 3.051 mm(5)
    • 4.0 mm(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(267)
    • 0.601 mm(2)
    • 1.0 mm(6)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(267)
    • 0.024 in(2)
    • 0.039 in(6)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Rough Finish
    Rough Finish
    • F (248)
    • R (27)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.197 in(1)
    • 0.228 in(4)
    • 0.276 in(1)
    • 0.307 in(3)
    • 0.354 in(1)
    • 0.374 in(7)
    • 0.433 in(1)
    • 0.453 in(8)
    • 0.591 in(9)
    • 0.748 in(7)
    • 0.946 in(4)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.0 mm(1)
    • 5.801 mm(4)
    • 7.0 mm(1)
    • 7.801 mm(3)
    • 9.0 mm(1)
    • 9.5 mm(7)
    • 11.0 mm(1)
    • 11.5 mm(8)
    • 15.0 mm(9)
    • 19.0 mm(7)
    • 24.0 mm(4)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 2.0 mm(1)
    • 3.0 mm(2)
    • 3.176 mm(6)
    • 4.0 mm(2)
    • 4.775 mm(7)
    • 5.0 mm(1)
    • 6.0 mm(12)
    • 6.351 mm(26)
    • 7.95 mm(4)
    • 8.0 mm(9)
    • 9.525 mm(31)
    • 10.0 mm(13)
    • 11.125 mm(2)
    • 12.0 mm(14)
    • 12.701 mm(49)
    • 14.0 mm(2)
    • 15.875 mm(11)
    • 16.0 mm(13)
    • 18.0 mm(1)
    • 19.05 mm(36)
    • 20.0 mm(11)
    • 25.0 mm(6)
    • 25.401 mm(16)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.079 in(1)
    • 0.119 in(2)
    • 0.125 in(6)
    • 0.157 in(2)
    • 0.188 in(7)
    • 0.197 in(1)
    • 0.237 in(12)
    • 0.25 in(26)
    • 0.313 in(4)
    • 0.315 in(9)
    • 0.375 in(31)
    • 0.394 in(13)
    • 0.438 in(2)
    • 0.473 in(14)
    • 0.5 in(49)
    • 0.551 in(2)
    • 0.625 in(11)
    • 0.63 in(13)
    • 0.709 in(1)
    • 0.75 in(36)
    • 0.787 in(11)
    • 0.984 in(6)
    • 1.0 in(16)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KenCut™ ALR • F3BA-WSMLX • S rádiusem • 3-břité • Vnitřní chlazení • Stopka Weldon® • Metrické
    (6)

    KenCut™ ALR • F3BA-WSMLX • S rádiusem • 3-břité • Vnitřní chlazení • Stopka Weldon® • Metrické

    KenCut™ AL • F2AA-ADL45 • Válcové • 2-břité • Válcová stopka • Metrické
    (9)

    KenCut™ AL • F2AA-ADL45 • Válcové • 2-břité • Válcová stopka • Metrické

    KenCut™ ALR • F3BA-WSMLX • Rohový rádius • 3-břité • Stopka Weldon® • Metrické
    (7)

    KenCut™ ALR • F3BA-WSMLX • Rohový rádius • 3-břité • Stopka Weldon® • Metrické

    KenCut™ AL • F3AA-AWSL45 • Válcové • 3-břité • Válcová stopka • Metrické
    (11)

    KenCut™ AL • F3AA-AWSL45 • Válcové • 3-břité • Válcová stopka • Metrické

    KenCut™ AL • AADF • Square End • 2 Flutes • Plain Shank • Inch
    (30)

    KenCut™ AL • AADF • Square End • 2 Flutes • Plain Shank • Inch

    KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Plain Shank • Inch
    (1)

    KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Plain Shank • Inch

    KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Weldon® Shank • Inch
    (7)

    KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Weldon® Shank • Inch

    KenCut™ AL • AADE • Square End • 3 Flutes • Plain Shank • Inch
    (65)

    KenCut™ AL • AADE • Square End • 3 Flutes • Plain Shank • Inch

    KenCut<StartNumerator/>™ AL • AADE • Radiused • 3 Flutes • Plain Shank • Inch
    (63)

    KenCut™ AL • AADE • Radiused • 3 Flutes • Plain Shank • Inch

    F3BA...WS-WM-WL-WX • Hrubovací profil • Prodloužené odsazení
    (6)

    F3BA...WS-WM-WL-WX • Hrubovací profil • Prodloužené odsazení

    KenCut™ AL • F2AA-WMLX • Válcové • 2-břité • Válcová stopka • Metrické
    (15)

    KenCut™ AL • F2AA-WMLX • Válcové • 2-břité • Válcová stopka • Metrické

    KenCut™ AL • F3AA-WSMLX • Rohový rádius • 3-břité • S odsazením • Válcová stopka • Metrické
    (25)

    KenCut™ AL • F3AA-WSMLX • Rohový rádius • 3-břité • S odsazením • Válcová stopka • Metrické

    KenCut™ AL • F1AA-WS-M • Válcové • 1-břité • Válcová stopka • Metrické
    (8)

    KenCut™ AL • F1AA-WS-M • Válcové • 1-břité • Válcová stopka • Metrické

    KenCut™ AL • AADF • Radiused • 2 Flutes • Plain Shank • Inch
    (22)

    KenCut™ AL • AADF • Radiused • 2 Flutes • Plain Shank • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?