Závitování LT – vyvrtávací tyče
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (44)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
- M Stainless Steel (52)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(52)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(52)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(52)
- K Cast Iron (28)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(28)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(28)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(28)
- S High-Temp Alloys (52)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
Type of Thread
Type of Thread
- 55 (52)
- 60 (52)
- ACME (39)
- API (13)
- API BUTTRESS (13)
- API RD (26)
- BSPT (39)
- BSW (52)
- M (52)
- NPT (39)
- NPTF (33)
- RD DIN 405 (39)
- STUB ACME (39)
- TR DIN 103 (39)
- UN (39)
- UNJ (39)
Over All Length [L]
Over All Length [L]
- 60.0 mm(1)
- 100.0 mm(2)
- 150.0 mm(2)
- 152.4 mm(2)
- 177.8 mm(8)
- 180.0 mm(11)
- 200.0 mm(5)
- 203.2 mm(1)
- 250.0 mm(6)
- 254.0 mm(10)
- 300.0 mm(2)
- 304.8 mm(2)
komu
Corner Radius
Corner Radius
- 0.0 mm(8)
- 0.025 mm(33)
- 0.05 mm(39)
- 0.075 mm(47)
- 0.1 mm(52)
- 0.125 mm(29)
- 0.15 mm(39)
- 0.175 mm(33)
- 0.2 mm(39)
- 0.225 mm(41)
- 0.25 mm(52)
- 0.275 mm(16)
- 0.3 mm(29)
- 0.325 mm(26)
- 0.35 mm(26)
- 0.4 mm(16)
- 0.425 mm(13)
- 0.45 mm(13)
- 0.5 mm(8)
- 0.525 mm(13)
- 0.55 mm(10)
- 0.6 mm(16)
- 0.625 mm(13)
- 0.65 mm(5)
- 0.7 mm(16)
- 0.925 mm(13)
- 0.95 mm(8)
komu
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (23)
- KC5025 (52)
- KC720 (7)
- KCU20B (52)
Hand Of Tool
Hand Of Tool
- L (21)
- R (31)
F Dimension
F Dimension
- 7.112 mm(4)
- 7.3 mm(4)
- 8.89 mm(3)
- 8.9 mm(2)
- 10.3 mm(1)
- 11.3 mm(2)
- 11.5 mm(2)
- 11.684 mm(4)
- 11.7 mm(1)
- 12.954 mm(4)
- 13.4 mm(3)
- 15.6 mm(2)
- 15.8 mm(1)
- 16.1 mm(2)
- 16.3 mm(2)
- 16.51 mm(3)
- 17.2 mm(2)
- 17.4 mm(1)
- 18.034 mm(3)
- 19.558 mm(1)
- 21.5 mm(2)
- 21.59 mm(1)
- 25.8 mm(2)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 12.7 mm(4)
- 13.0 mm(4)
- 16.0 mm(2)
- 16.51 mm(3)
- 17.0 mm(1)
- 20.0 mm(5)
- 20.32 mm(4)
- 22.86 mm(4)
- 24.0 mm(3)
- 27.0 mm(2)
- 29.0 mm(5)
- 30.48 mm(3)
- 31.75 mm(3)
- 32.0 mm(3)
- 36.83 mm(1)
- 38.1 mm(1)
- 39.0 mm(2)
- 47.0 mm(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 12.7 mm(4)
- 13.0 mm(4)
- 16.0 mm(2)
- 16.51 mm(3)
- 17.0 mm(1)
- 20.0 mm(5)
- 20.32 mm(4)
- 22.86 mm(4)
- 24.0 mm(3)
- 27.0 mm(2)
- 29.0 mm(5)
- 30.48 mm(3)
- 31.75 mm(3)
- 32.0 mm(3)
- 36.83 mm(1)
- 38.1 mm(1)
- 39.0 mm(2)
- 47.0 mm(2)
komu
Maximum Bore Depth
Maximum Bore Depth
- 25.0 mm(2)
- 25.4 mm(2)
- 31.75 mm(2)
- 32.0 mm(3)
- 35.94 mm(1)
- 38.1 mm(2)
- 39.878 mm(1)
- 40.0 mm(3)
- 57.15 mm(2)
- 60.0 mm(2)
- 63.5 mm(4)
- 64.0 mm(2)
- 76.2 mm(2)
- 80.0 mm(4)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(4)
- 114.3 mm(2)
- 120.0 mm(1)
- 127.0 mm(2)
- 128.0 mm(3)
- 150.0 mm(1)
- 152.4 mm(2)
- 160.0 mm(2)
komu
Boring Bar Material
Boring Bar Material
- C (12)
- S (40)
frontEnd
Clamp Style
Clamp Style
- C (14)
- M (23)
- S (15)
backEnd
Back-End Diameter
Back-End Diameter
- 9.525 mm(2)
- 10.0 mm(2)
- 12.7 mm(1)
- 15.875 mm(2)
- 16.0 mm(3)
- 19.05 mm(10)
- 20.0 mm(12)
- 25.0 mm(5)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(5)
- 40.0 mm(2)
komu
Shank Height
Shank Height
- 14.82 mm(2)
- 15.41 mm(1)
- 18.82 mm(11)
- 19.41 mm(1)
- 23.82 mm(4)
- 24.41 mm(1)
- 30.82 mm(5)
- 38.82 mm(2)
komu
Shank Width
Shank Width
- 21.96 mm(4)
- 28.96 mm(5)
- 36.96 mm(2)
komu
No filters matching ""
