Závitování TOP NOTCH™
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (796)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(791)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(791)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(791)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(789)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(794)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(794)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(788)
- M Stainless Steel (951)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(950)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(948)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(946)
- K Cast Iron (691)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(689)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(691)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(689)
- N Non-Ferrous Materials (709)
- N1Wrought Aluminum (708)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(674)
- N3High-Silicon Aluminum Alloys Si >12.2%(60)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (708)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (671)
- N6Carbon, Graphite Composites, CFRP (671)
- S High-Temp Alloys (939)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(939)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(939)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(939)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(939)
- H Hardened Materials (365)
- H1Hardened Materials 44-48 HRC(365)
- H2Hardened Materials 48-55 HRC(128)
- H3Hardened Materials 56-60 HRC(95)
- H4Hardened Materials >60 HRC(95)
Applications
Applications
Face Grooving (187)
Grooving (123)
ID Grooving (69)
ID Thread Turning (735)
OD Thread Turning (913)
Type of Thread
Type of Thread
- 60 (316)
- ACME (227)
- API (122)
- API RD (78)
- BSW (69)
- BUTTRESS (214)
- M (36)
- NPT (80)
- STUB ACME (118)
- UN (388)
- UNJ (207)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (180)
- Lightly Interrupted Cut (180)
- Smooth Cut (181)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (188)
komu
Connection Style
Connection Style
- Bolt-On Head (6)
- Boring Bar Shank (63)
- Toolholder (80)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (181)
- 2.0 (982)
- 4.0 (6)
komu
Over All Length [L]
Over All Length [L]
- 41.275 mm(6)
- 55.0 mm(1)
- 55.67 mm(1)
- 63.5 mm(4)
- 70.0 mm(2)
- 80.0 mm(2)
- 88.9 mm(4)
- 100.0 mm(4)
- 101.6 mm(3)
- 114.3 mm(14)
- 125.0 mm(9)
- 127.0 mm(15)
- 150.0 mm(19)
- 152.29 mm(1)
- 152.4 mm(37)
- 170.0 mm(10)
- 177.8 mm(2)
- 179.8 mm(2)
- 200.0 mm(4)
- 201.422 mm(1)
- 202.591 mm(1)
- 203.19 mm(1)
- 203.2 mm(5)
- 204.673 mm(2)
- 205.283 mm(1)
- 250.0 mm(2)
- 250.927 mm(1)
- 254.0 mm(8)
- 300.0 mm(4)
- 304.8 mm(6)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.4 mm(8)
komu
Corner Radius
Corner Radius
- 0.025 mm(30)
- 0.05 mm(32)
- 0.075 mm(272)
- 0.1 mm(206)
- 0.125 mm(95)
- 0.15 mm(132)
- 0.175 mm(271)
- 0.2 mm(200)
- 0.225 mm(80)
- 0.25 mm(188)
- 0.275 mm(46)
- 0.3 mm(65)
- 0.325 mm(126)
- 0.35 mm(164)
- 0.4 mm(81)
- 0.45 mm(86)
- 0.475 mm(32)
- 0.5 mm(147)
- 0.575 mm(105)
- 0.75 mm(37)
- 0.775 mm(131)
- 0.825 mm(5)
- 0.9 mm(103)
- 1.0 mm(131)
- 1.2 mm(131)
- 1.25 mm(37)
- 1.5 mm(131)
- 1.575 mm(59)
- 1.6 mm(167)
- 1.75 mm(37)
- 1.975 mm(59)
- 2.0 mm(59)
- 2.4 mm(95)
- 2.5 mm(19)
- 3.175 mm(36)
komu
Corner Chamfer
Corner Chamfer
- 0.0 mm(820)
komu
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (174)
- K420 (181)
- K68 (213)
- KB1630 (95)
- KBH20 (30)
- KC5010 (287)
- KC5025 (323)
- KC5410 (103)
- KC720 (178)
- KC730 (255)
- KC850 (214)
- KC9110 (19)
- KCK20 (130)
- KCK20B (167)
- KCP10B (167)
- KCP25B (167)
- KCP25C (169)
- KCU10 (252)
- KCU10B (306)
- KCU25 (259)
- KCU25B (328)
- KD1425 (59)
- KT315 (115)
Hand Of Tool
Hand Of Tool
- L (59)
- R (90)
Wiper Insert
Wiper Insert
- N (1004)
F Dimension
F Dimension
- 6.55 mm(1)
- 6.553 mm(2)
- 6.73 mm(1)
- 7.0 mm(2)
- 8.26 mm(1)
- 9.52 mm(2)
- 10.0 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.973 mm(4)
- 11.0 mm(4)
- 11.1 mm(2)
- 12.0 mm(1)
- 12.573 mm(3)
- 12.7 mm(6)
- 13.0 mm(2)
- 14.0 mm(2)
- 14.148 mm(3)
- 14.27 mm(1)
- 14.275 mm(3)
- 15.875 mm(2)
- 15.88 mm(2)
- 16.0 mm(4)
- 17.0 mm(4)
- 17.348 mm(2)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.05 mm(2)
- 20.0 mm(2)
- 22.0 mm(2)
- 22.225 mm(4)
- 25.0 mm(4)
- 25.4 mm(9)
- 27.0 mm(4)
- 28.575 mm(2)
- 31.75 mm(19)
- 32.0 mm(9)
- 34.925 mm(4)
- 35.0 mm(1)
- 38.1 mm(14)
- 40.0 mm(4)
- 41.275 mm(4)
- 50.8 mm(4)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 11.176 mm(1)
- 11.18 mm(1)
- 11.181 mm(1)
- 11.5 mm(2)
- 12.19 mm(1)
- 15.24 mm(1)
- 18.5 mm(2)
- 18.542 mm(6)
- 20.32 mm(1)
- 22.0 mm(3)
- 25.4 mm(5)
- 26.0 mm(2)
- 28.575 mm(4)
- 28.58 mm(1)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 44.0 mm(2)
- 44.45 mm(2)
- 50.8 mm(2)
- 54.0 mm(4)
- 57.15 mm(1)
- 63.5 mm(4)
- 69.85 mm(4)
- 70.0 mm(1)
- 76.2 mm(4)
- 82.55 mm(4)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(76)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.181 mm(1)
- 11.5 mm(2)
- 12.19 mm(1)
- 15.24 mm(1)
- 18.5 mm(2)
- 18.542 mm(6)
- 20.32 mm(1)
- 22.0 mm(3)
- 25.4 mm(5)
- 26.0 mm(2)
- 28.575 mm(4)
- 28.58 mm(1)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 38.1 mm(4)
- 41.3 mm(27)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.6 mm(27)
- 50.0 mm(2)
- 50.8 mm(2)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(29)
- 57.15 mm(1)
- 57.2 mm(15)
- 60.325 mm(2)
- 63.5 mm(22)
- 69.85 mm(4)
- 70.0 mm(1)
- 76.2 mm(8)
- 82.55 mm(4)
- 88.9 mm(58)
- 127.0 mm(1)
- 139.7 mm(27)
- 146.05 mm(3)
- 174.6 mm(27)
- 209.6 mm(17)
- 222.3 mm(15)
- 333.0 mm(3)
komu
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(181)
komu
Countersunk Angle
Countersunk Angle
- 7.0 (20)
- 14.5 (183)
- 27.0 (10)
- 27.5 (10)
- 30.0 (558)
- 33.0 (10)
- 45.0 (27)
komu
Cutting Direction
Cutting Direction
- E (80)
- S (69)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (147)
Maximum Bore Depth
Maximum Bore Depth
- 25.4 mm(10)
- 31.26 mm(1)
- 31.3 mm(1)
- 32.8 mm(1)
- 38.1 mm(1)
- 39.5 mm(1)
- 47.5 mm(1)
- 48.0 mm(2)
- 50.8 mm(26)
- 63.48 mm(1)
- 63.5 mm(4)
- 64.0 mm(2)
- 76.2 mm(4)
- 79.375 mm(1)
- 80.0 mm(2)
- 95.25 mm(3)
- 96.0 mm(1)
- 100.0 mm(4)
- 101.6 mm(4)
- 114.3 mm(2)
- 127.0 mm(2)
- 128.0 mm(2)
- 152.4 mm(4)
- 160.0 mm(4)
- 177.8 mm(3)
- 200.0 mm(1)
- 203.2 mm(6)
- 228.6 mm(1)
- 254.0 mm(7)
komu
Boring Bar Material
Boring Bar Material
- C (9)
- H (6)
- S (54)
frontEnd
Clamp Style
Clamp Style
- N (187)
Cutting Width
Cutting Width
- 0.5 mm(72)
- 0.787 mm(80)
- 0.8 mm(72)
- 0.889 mm(37)
- 0.991 mm(72)
- 1.0 mm(131)
- 1.041 mm(72)
- 1.19 mm(101)
- 1.194 mm(139)
- 1.2 mm(131)
- 1.39 mm(72)
- 1.397 mm(37)
- 1.4 mm(72)
- 1.473 mm(72)
- 1.5 mm(131)
- 1.57 mm(94)
- 1.575 mm(139)
- 1.69 mm(37)
- 1.7 mm(72)
- 1.702 mm(72)
- 1.75 mm(131)
- 1.829 mm(59)
- 1.94 mm(35)
- 1.95 mm(72)
- 1.956 mm(35)
- 1.981 mm(59)
- 2.0 mm(131)
- 2.007 mm(72)
- 2.2 mm(131)
- 2.235 mm(96)
- 2.236 mm(30)
- 2.24 mm(72)
- 2.25 mm(101)
- 2.387 mm(30)
- 2.388 mm(139)
- 2.39 mm(29)
- 2.464 mm(59)
- 2.5 mm(131)
- 2.667 mm(59)
- 2.74 mm(35)
- 2.743 mm(37)
- 2.75 mm(131)
- 2.794 mm(59)
- 2.997 mm(96)
- 3.0 mm(167)
- 3.099 mm(59)
- 3.17 mm(59)
- 3.175 mm(167)
- 3.18 mm(54)
- 3.2 mm(115)
- 3.245 mm(72)
- 3.25 mm(59)
- 3.251 mm(30)
- 3.27 mm(35)
- 3.32 mm(30)
- 3.5 mm(132)
- 3.607 mm(59)
- 3.81 mm(37)
- 3.82 mm(37)
- 3.835 mm(37)
- 3.84 mm(72)
- 3.96 mm(59)
- 3.962 mm(59)
- 3.974 mm(30)
- 3.988 mm(59)
- 4.0 mm(95)
- 4.242 mm(36)
- 4.25 mm(59)
- 4.5 mm(95)
- 4.521 mm(59)
- 4.699 mm(59)
- 4.775 mm(95)
- 4.78 mm(17)
- 4.785 mm(17)
- 4.788 mm(19)
- 4.8 mm(59)
- 4.801 mm(95)
- 4.88 mm(30)
- 4.95 mm(59)
- 4.953 mm(30)
- 4.978 mm(59)
- 5.0 mm(36)
- 5.004 mm(19)
- 5.41 mm(36)
- 5.5 mm(36)
- 6.0 mm(36)
- 6.35 mm(37)
- 6.36 mm(19)
- 6.502 mm(36)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(3)
- 9.677 mm(3)
- 9.754 mm(8)
komu
Insert Shape
Insert Shape
- TN-TOP NOTCH (938)
Insert Size
Insert Size
- 1 (8)
- 2 (45)
- 3 (32)
- 4 (16)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.78 mm(2)
- 1.9 mm(1)
- 3.3 mm(1)
- 3.505 mm(21)
- 3.51 mm(19)
- 5.33 mm(16)
- 5.334 mm(23)
- 6.096 mm(2)
- 6.35 mm(2)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.484 mm(4)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
komu
Thread TPI
Thread TPI
- 2.0 (11)
- 2.5 (4)
- 3.0 (6)
- 4.0 (47)
- 5.0 (37)
- 6.0 (43)
- 7.0 (2)
- 8.0 (78)
- 9.0 (2)
- 10.0 (32)
- 11.0 (10)
- 11.5 (8)
- 12.0 (53)
- 13.0 (4)
- 14.0 (22)
- 16.0 (74)
- 18.0 (19)
- 20.0 (32)
- 24.0 (27)
- 27.0 (2)
- 28.0 (15)
- 32.0 (15)
komu
Thread Pitch
Thread Pitch
- 1.5 mm(4)
- 2.0 mm(10)
- 6.25 mm(4)
komu
insertGeometry
Shape
Shape
- TN-TOP NOTCH (750)
Insert IC Size
Insert IC Size
- 4.762 mm(4)
komu
Insert Seat Size
Insert Seat Size
- 1 (8)
- 2 (100)
- 3 (572)
- 4 (104)
- 4U (4)
- 6 (23)
- 8 (7)
Cutting Tool Material
Cutting Tool Material
- B H (95)
- B L (30)
- D P (59)
- H T (115)
- H W (950)
backEnd
Connection Type
Connection Type
- BORING BAR (63)
- BORING BAR HEAD (6)
- SQUARE SHANK (80)
Back-End Diameter
Back-End Diameter
- 7.9 mm(1)
- 9.5 mm(1)
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(3)
- 12.7 mm(8)
- 15.87 mm(1)
- 15.875 mm(5)
- 16.0 mm(3)
- 19.05 mm(5)
- 20.0 mm(2)
- 25.0 mm(4)
- 25.4 mm(6)
- 31.75 mm(2)
- 32.0 mm(2)
- 38.1 mm(2)
- 40.0 mm(4)
- 44.45 mm(3)
- 50.0 mm(1)
- 50.8 mm(6)
- 57.15 mm(1)
- 63.5 mm(7)
komu
Shank Height
Shank Height
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.41 mm(1)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(9)
- 20.0 mm(4)
- 23.82 mm(1)
- 25.0 mm(6)
- 25.4 mm(15)
- 30.82 mm(2)
- 31.75 mm(10)
- 32.0 mm(7)
- 38.1 mm(4)
- 38.82 mm(4)
- 46.96 mm(1)
komu
Shank Width
Shank Width
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(9)
- 20.0 mm(4)
- 21.96 mm(1)
- 25.0 mm(9)
- 25.4 mm(15)
- 28.96 mm(2)
- 31.75 mm(10)
- 32.0 mm(4)
- 36.96 mm(4)
- 38.1 mm(4)
- 46.96 mm(1)
komu
No filters matching ""
