Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KM4X100™

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (49)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(49)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(49)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(49)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(49)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(49)
    • M Stainless Steel (47)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(47)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(47)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(47)
    • K Cast Iron (49)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(49)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(49)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(49)
    • N Non-Ferrous Materials (39)
      • N1
        Wrought Aluminum (39)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(38)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(18)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (39)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (38)
      • N6
        Carbon, Graphite Composites, CFRP (38)
      • N7
        MMC's (35)
    • S High-Temp Alloys (42)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(42)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(42)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
    • H Hardened Materials (32)
      • H1
        Hardened Materials 44-48 HRC(32)
      • H2
        Hardened Materials 48-55 HRC(32)
      • H3
        Hardened Materials 56-60 HRC(30)
      • H4
        Hardened Materials >60 HRC(16)
    • C CFRP Materials (31)
      • C1
        CFRP, CFRP / CFRP (31)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (29)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (13)
    • Deep GroovingDeep Grooving (8)
    • FacingFacing (43)
    • GroovingGrooving (8)
    • ID FacingID Facing (25)
    • ID GroovingID Grooving (8)
    • ID Thread TurningID Thread Turning (8)
    • Multiple Direction CuttingMultiple Direction Cutting (44)
    • OD Thread TurningOD Thread Turning (8)
    • Plunge TurningPlunge Turning (11)
    • ProfilingProfiling (30)
    • TRN BoringTRN Boring (33)
    • TurningTurning (44)
    Type of Thread
    Type of Thread
    • 60 (4)
    • ACME (6)
    • API (4)
    • API RD (4)
    • BSW (2)
    • BUTTRESS (4)
    • M (2)
    • NPT (2)
    • STUB ACME (2)
    • UN (4)
    • UNJ (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (44)
    • Lightly Interrupted Cut (48)
    • Smooth Cut (49)
    • Varying Depth of Cut (49)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (2)
    • 75.0 (11)
    • 90.0 (17)
    • 93.0 (10)
    • 95.0 (12)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (19)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (23)
    • 2.0 (38)
    • 3.0 (2)
    • 4.0 (31)
    • 6.0 (2)
    • 8.0 (27)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.938 in(51)
    • 4.331 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 100.0 mm(51)
    • 110.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(2)
    • 0.003 in(4)
    • 0.004 in(10)
    • 0.005 in(2)
    • 0.006 in(4)
    • 0.007 in(4)
    • 0.008 in(8)
    • 0.01 in(4)
    • 0.011 in(2)
    • 0.012 in(2)
    • 0.014 in(10)
    • 0.016 in(16)
    • 0.019 in(4)
    • 0.02 in(2)
    • 0.023 in(6)
    • 0.031 in(28)
    • 0.033 in(4)
    • 0.035 in(4)
    • 0.039 in(2)
    • 0.047 in(28)
    • 0.049 in(2)
    • 0.06 in(2)
    • 0.062 in(4)
    • 0.063 in(35)
    • 0.069 in(2)
    • 0.078 in(2)
    • 0.079 in(4)
    • 0.089 in(4)
    • 0.094 in(11)
    • 0.095 in(29)
    • 0.098 in(2)
    • 0.125 in(2)
    • 0.126 in(13)
    • 0.157 in(4)
    • 0.25 in(2)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.492 in(1)
    • 0.5 in(2)
    • 0.63 in(1)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(2)
    • 0.076 mm(4)
    • 0.1 mm(10)
    • 0.125 mm(2)
    • 0.151 mm(4)
    • 0.176 mm(4)
    • 0.2 mm(8)
    • 0.225 mm(2)
    • 0.25 mm(4)
    • 0.275 mm(2)
    • 0.301 mm(2)
    • 0.325 mm(6)
    • 0.351 mm(8)
    • 0.4 mm(16)
    • 0.45 mm(4)
    • 0.476 mm(1)
    • 0.5 mm(2)
    • 0.576 mm(6)
    • 0.775 mm(2)
    • 0.8 mm(26)
    • 0.826 mm(4)
    • 0.9 mm(4)
    • 1.0 mm(2)
    • 1.201 mm(28)
    • 1.25 mm(2)
    • 1.5 mm(2)
    • 1.576 mm(4)
    • 1.6 mm(35)
    • 1.75 mm(2)
    • 1.975 mm(2)
    • 2.0 mm(4)
    • 2.25 mm(4)
    • 2.375 mm(11)
    • 2.401 mm(29)
    • 2.5 mm(2)
    • 3.176 mm(2)
    • 3.2 mm(13)
    • 4.0 mm(4)
    • 6.351 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(1)
    • 12.5 mm(1)
    • 12.701 mm(2)
    • 16.0 mm(1)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (20)
    • 241 (2)
    • CG4 (1)
    • CL4 (19)
    • CM2 (16)
    • CM3 (19)
    • CM4 (6)
    • CM5 (1)
    • CPX (23)
    • CW2 (6)
    • CW2015 (20)
    • CW5025 (20)
    • GX (15)
    • HK1500 (14)
    • HT2 (6)
    • HTX (2)
    • K060 (2)
    • K090 (30)
    • K1 (17)
    • K10M (24)
    • K10P (22)
    • K10U (8)
    • K15U (8)
    • K20K (26)
    • K21 (14)
    • K25M (12)
    • K25P (22)
    • K2885 (2)
    • K313 (33)
    • K35P (12)
    • K420 (35)
    • K45 (4)
    • K4H (2)
    • K68 (41)
    • KB1340 (2)
    • KB1345 (6)
    • KB1610 (4)
    • KB1625 (4)
    • KB1630 (8)
    • KB5610 (4)
    • KB5625 (6)
    • KB5630 (4)
    • KB9610 (8)
    • KB9640 (4)
    • KBH10 (8)
    • KBH10B (8)
    • KBH20 (9)
    • KBH20B (8)
    • KBK35 (2)
    • KC210 (18)
    • KC250 (22)
    • KC5010 (44)
    • KC5025 (34)
    • KC5410 (30)
    • KC5510 (26)
    • KC5525 (8)
    • KC710 (8)
    • KC720 (16)
    • KC722 (6)
    • KC730 (29)
    • KC7310 (24)
    • KC732 (10)
    • KC8050 (40)
    • KC810 (36)
    • KC850 (48)
    • KC9010 (25)
    • KC9025 (37)
    • KC910 (32)
    • KC9105 (20)
    • KC9110 (45)
    • KC9120 (39)
    • KC9125 (41)
    • KC9125RR (4)
    • KC9140 (39)
    • KC9145 (37)
    • KC9210 (4)
    • KC9215 (24)
    • KC9225 (26)
    • KC9240 (35)
    • KC9240NEW (31)
    • KC9245 (26)
    • KC9315 (33)
    • KC9320 (30)
    • KC9325 (32)
    • KC935 (38)
    • KC950 (37)
    • KC990 (33)
    • KCK05 (26)
    • KCK05B (24)
    • KCK15 (28)
    • KCK15B (29)
    • KCK20 (33)
    • KCK20B (37)
    • KCM15 (26)
    • KCM15B (22)
    • KCM25 (30)
    • KCM25B (29)
    • KCM35 (26)
    • KCM35B (22)
    • KCP05 (12)
    • KCP05B (11)
    • KCP10 (41)
    • KCP10B (36)
    • KCP25 (41)
    • KCP25B (43)
    • KCP25C (40)
    • KCP30 (40)
    • KCP30B (31)
    • KCP40 (35)
    • KCP40B (37)
    • KCPK05 (25)
    • KCS10 (3)
    • KCS10B (26)
    • KCU10 (44)
    • KCU10B (37)
    • KCU25 (34)
    • KCU25B (30)
    • KD050 (5)
    • KD081 (6)
    • KD100 (7)
    • KD120 (8)
    • KD1400 (4)
    • KD1405 (4)
    • KD1425 (6)
    • KM1 (7)
    • KMF (2)
    • KS15 (2)
    • KT1120 (4)
    • KT125 (8)
    • KT150 (4)
    • KT175 (10)
    • KT315 (12)
    • KT325 (6)
    • KT5020 (2)
    • KTP10 (8)
    • KTP25S (8)
    • KU10T (12)
    • KU25T (4)
    • KU30T (32)
    • KY1310 (6)
    • KY1320 (20)
    • KY1540 (10)
    • KY1615 (25)
    • KY2000 (14)
    • KY2100 (2)
    • KY3000 (30)
    • KY3400 (18)
    • KY3500 (24)
    • KY4000 (8)
    • KY4300 (14)
    • KY4400 (22)
    • KYHK15B (22)
    • KYK10 (2)
    • KYK25 (14)
    • KYK35 (24)
    • KYS25 (10)
    • KYS30 (10)
    • MC2 (1)
    • NL200 (6)
    • NL250 (26)
    • NL300 (32)
    • NL400 (17)
    • NL920 (13)
    • P25 (2)
    • PB100 (2)
    • PB170 (2)
    • PB250 (2)
    • PB300 (2)
    • PS5 (6)
    • SP0819 (22)
    • SP3019 (18)
    • SP4019 (14)
    • SP4036 (2)
    • SP4093 (2)
    • SPADAP (19)
    • SPN4W2 (4)
    • THM (16)
    • THM-X (6)
    • THMF-X (2)
    • TN10P (27)
    • TN10U (8)
    • TN15M (24)
    • TN15U (8)
    • TN2000 (18)
    • TN20K (28)
    • TN20P (30)
    • TN30M (24)
    • TN30P (28)
    • TN4000 (18)
    • TN5015 (22)
    • TN5020 (22)
    • TN5105 (6)
    • TN5120 (22)
    • TN6010 (12)
    • TN6025 (13)
    • TN7005 (6)
    • TN7010 (22)
    • TN7015 (31)
    • TN7025 (31)
    • TN7035 (24)
    • TN7105 (6)
    • TN7110 (22)
    • TN7115 (29)
    • TN7125 (31)
    • TN7135 (24)
    • TN8025 (29)
    • TTI15 (6)
    • TTM09 (4)
    • TTR (2)
    • TTR-X (4)
    • TTS (18)
    • TTX (6)
    • W00342 (6)
    • WBH10C (8)
    • WBH10P (4)
    • WBH10U (4)
    • WBH20P (8)
    • WBH25P (4)
    • WBH25U (6)
    • WBH30P (4)
    • WBK40U (2)
    • WBK45U (6)
    • WDN00U (2)
    • WDN25U (4)
    • WK05CT (26)
    • WK15CT (6)
    • WK20CT (30)
    • WM15CT (26)
    • WM25CT (29)
    • WM35CT (26)
    • WP05CT (2)
    • WP15CT (37)
    • WP25CT (37)
    • WP35CT (37)
    • WS10PT (24)
    • WS25PT (26)
    • WU10HT (23)
    • WU10PT (10)
    • WU25PT (9)
    • X00511 (2)
    • X00580 (2)
    • X00581 (2)
    • X00582 (2)
    • X00583 (2)
    • X00584 (2)
    • X00585 (2)
    • X00586 (2)
    • X00591 (2)
    • X00592 (2)
    • X00593 (2)
    • X00594 (2)
    • X00596 (2)
    • X00597 (2)
    • X00599 (2)
    Hand Of Tool
    Hand Of Tool
    • L (7)
    • N (5)
    • R (7)
    Wiper Insert
    Wiper Insert
    • N (50)
    • Y (12)
    F Dimension
    F Dimension
    • 0.0 mm(2)
    • 10.0 mm(1)
    • 12.5 mm(1)
    • 16.0 mm(1)
    • 58.0 mm(8)
    • 63.0 mm(6)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(2)
    • 0.394 in(1)
    • 0.492 in(1)
    • 0.63 in(1)
    • 2.283 in(8)
    • 2.48 in(6)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 120.0 mm(33)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 4.724 in(33)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(7)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(7)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (3)
    • S (16)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (14)
    • NEGATIVE-ZERO (2)
    Maximum Bore Depth
    Maximum Bore Depth
    • 3.938 in(33)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 100.0 mm(33)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • BOEING TAPER FLANGE (1)
    • CARTRIDGE MOUNT (4)
    • END MILL ADAPTER (18)
    • ER COLLET CHUCK (4)
    • FM ADAPTER (1)
    • HTS MODULAR ADAPTER (2)
    • HYDRAULIC CHUCK (25)
    • HYDRAULIC CHUCK-HIGH TORQUE (5)
    • HYDRAULIC CHUCK-SLIM LINE (7)
    • KM MODULAR ADAPTER (15)
    • SHELL MILL ADAPTER (64)
    • SHRINK FIT ADAPTER (36)
    • SQUARE SHANK ADAPTER (9)
    • TUNABLE SHELL MILL ADAPTER (6)
    • WHISTLE NOTCH ADAPTER (10)
    Clamp Style
    Clamp Style
    • D (8)
    • M (29)
    • N (8)
    • P (4)
    • X (3)
    Cutting Width
    Cutting Width
    • 0.039 in(2)
    • 0.047 in(2)
    • 0.06 in(2)
    • 0.062 in(2)
    • 0.069 in(2)
    • 0.073 in(2)
    • 0.078 in(2)
    • 0.079 in(2)
    • 0.088 in(2)
    • 0.089 in(1)
    • 0.094 in(1)
    • 0.095 in(2)
    • 0.097 in(2)
    • 0.098 in(2)
    • 0.105 in(2)
    • 0.108 in(2)
    • 0.11 in(2)
    • 0.119 in(4)
    • 0.122 in(2)
    • 0.125 in(4)
    • 0.126 in(4)
    • 0.128 in(2)
    • 0.131 in(1)
    • 0.138 in(4)
    • 0.143 in(2)
    • 0.156 in(2)
    • 0.157 in(4)
    • 0.167 in(4)
    • 0.169 in(2)
    • 0.177 in(4)
    • 0.178 in(2)
    • 0.185 in(3)
    • 0.188 in(4)
    • 0.189 in(4)
    • 0.192 in(1)
    • 0.193 in(1)
    • 0.195 in(2)
    • 0.196 in(2)
    • 0.197 in(4)
    • 0.202 in(2)
    • 0.213 in(2)
    • 0.217 in(2)
    • 0.218 in(2)
    • 0.219 in(2)
    • 0.237 in(4)
    • 0.25 in(6)
    • 0.256 in(2)
    • 0.276 in(2)
    • 0.281 in(4)
    • 0.312 in(4)
    • 0.315 in(1)
    • 0.345 in(2)
    • 0.354 in(2)
    • 0.375 in(4)
    • 0.381 in(2)
    • 0.384 in(2)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.0 mm(2)
    • 1.201 mm(2)
    • 1.5 mm(2)
    • 1.576 mm(2)
    • 1.75 mm(2)
    • 1.826 mm(2)
    • 1.975 mm(2)
    • 2.0 mm(2)
    • 2.2 mm(2)
    • 2.225 mm(2)
    • 2.25 mm(1)
    • 2.375 mm(1)
    • 2.401 mm(2)
    • 2.475 mm(2)
    • 2.5 mm(2)
    • 2.676 mm(2)
    • 2.75 mm(2)
    • 2.801 mm(2)
    • 3.0 mm(4)
    • 3.1 mm(2)
    • 3.176 mm(4)
    • 3.2 mm(4)
    • 3.25 mm(2)
    • 3.325 mm(1)
    • 3.5 mm(4)
    • 3.6 mm(2)
    • 3.95 mm(2)
    • 3.975 mm(1)
    • 4.0 mm(4)
    • 4.25 mm(4)
    • 4.3 mm(2)
    • 4.5 mm(4)
    • 4.525 mm(2)
    • 4.7 mm(3)
    • 4.775 mm(4)
    • 4.801 mm(4)
    • 4.875 mm(1)
    • 4.9 mm(1)
    • 4.95 mm(2)
    • 4.976 mm(2)
    • 5.0 mm(4)
    • 5.125 mm(2)
    • 5.4 mm(2)
    • 5.5 mm(2)
    • 5.525 mm(2)
    • 5.575 mm(2)
    • 6.0 mm(4)
    • 6.351 mm(6)
    • 6.5 mm(2)
    • 7.0 mm(2)
    • 7.125 mm(4)
    • 7.926 mm(4)
    • 8.0 mm(1)
    • 8.75 mm(2)
    • 9.0 mm(2)
    • 9.525 mm(4)
    • 9.675 mm(2)
    • 9.75 mm(2)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • BTF - BTF (1)
    • FDA - Milling Cutter Arbor (64)
    • FLK - Flange Adapter Kenna (1)
    • HTS - Deep Hole Index Drill (2)
    • KMT - KM Adapter (15)
    • MCS - Modular Cartridge System (4)
    • SPK-Holding Arbor-Spindle Head (6)
    • SZK - Collet Taper (4)
    • VKT - Square Shank (9)
    • ZYL - Cylindrical Adapter (101)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (18)
    • D-DIAMOND/RHOMBIC 55 (4)
    • R-ROUND (9)
    • S-SQUARE 90 (7)
    • T-TRIANGLE 60 (4)
    • TN-TOP NOTCH (8)
    • V-DIAMOND/RHOMBIC 35 (2)
    Front End Style
    Front End Style
    • BTF01 Standard BTF (1)
    • FDA22 Transv Drive & SHCS (64)
    • FLK32FlngMt 3&6Bolt 67&97DBC (1)
    • HTS01 Standard HTS Shank (2)
    • KMT00 All KM, except 02,05,09 (13)
    • KMT09 KM4X 4 ball connection (2)
    • MCS01 Modular Deep Grooving (4)
    • SPK02 Bolt Circ Dia 101.6 mm (6)
    • SZK02 Collets 8 Degree Taper (4)
    • VKT01 Std Design (9)
    • ZYL01 Straight Shank (73)
    • ZYL10 Weldon Shank (18)
    • ZYL13 2Deg-Whistle Notch (10)
    Insert Size
    Insert Size
    • 3 (2)
    • 4 (2)
    • 5 (2)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.581 in(1)
    • 1.974 in(1)
    • 2.368 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 40.151 mm(1)
    • 50.151 mm(1)
    • 60.151 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 4 in(9)
    • 6 in(8)
    • 2 in(2)
    • 3 in(2)
    • 13 in(1)
    • 5 in(1)
    • 1.969 in(3)
    • 2.071 in(3)
    • 2.165 in(4)
    • 2.25 in(3)
    • 2.362 in(4)
    • 2.648 in(1)
    • 2.953 in(2)
    • 3.003 in(2)
    • 3.15 in(5)
    • 3.25 in(1)
    • 3.337 in(1)
    • 3.346 in(8)
    • 3.38 in(1)
    • 3.426 in(2)
    • 3.484 in(2)
    • 3.5 in(1)
    • 3.543 in(6)
    • 3.74 in(4)
    • 3.75 in(4)
    • 3.894 in(1)
    • 3.938 in(19)
    • 4.134 in(4)
    • 4.17 in(1)
    • 4.25 in(2)
    • 4.258 in(1)
    • 4.331 in(1)
    • 4.337 in(1)
    • 4.5 in(1)
    • 4.529 in(3)
    • 4.604 in(1)
    • 4.724 in(7)
    • 4.75 in(1)
    • 4.968 in(1)
    • 5.037 in(1)
    • 5.118 in(1)
    • 5.258 in(1)
    • 5.315 in(3)
    • 5.337 in(1)
    • 5.5 in(1)
    • 5.604 in(1)
    • 5.75 in(1)
    • 5.906 in(15)
    • 5.968 in(1)
    • 6.037 in(1)
    • 6.258 in(1)
    • 6.299 in(20)
    • 6.337 in(1)
    • 6.604 in(1)
    • 6.968 in(1)
    • 7.037 in(1)
    • 7.258 in(1)
    • 7.337 in(1)
    • 7.604 in(1)
    • 7.875 in(15)
    • 7.968 in(1)
    • 8.037 in(1)
    • 8.259 in(1)
    • 8.605 in(1)
    • 8.968 in(1)
    • 9.037 in(1)
    • 10.236 in(1)
    • 10.468 in(1)
    • 10.5 in(1)
    • 11.468 in(1)
    • 12.5 in(1)
    • 12.598 in(1)
    • 12.992 in(1)
    Gage Length
    Gage Length
    • 160 mm(20)
    • 100 mm(19)
    • 150 mm(15)
    • 200 mm(15)
    • 85 mm(8)
    • 120 mm(7)
    • 90 mm(6)
    • 80 mm(5)
    • 105 mm(4)
    • 55 mm(4)
    • 60 mm(4)
    • 95 mm(4)
    • 115 mm(3)
    • 135 mm(3)
    • 50 mm(3)
    • 75 mm(2)
    • 87 mm(2)
    • 110 mm(1)
    • 127 mm(1)
    • 130 mm(1)
    • 260 mm(1)
    • 320 mm(1)
    • 330 mm(1)
    • 50.801 mm(2)
    • 52.6 mm(3)
    • 57.151 mm(3)
    • 67.226 mm(1)
    • 76.2 mm(2)
    • 76.25 mm(2)
    • 82.551 mm(1)
    • 84.75 mm(1)
    • 85.851 mm(1)
    • 88.5 mm(2)
    • 88.9 mm(1)
    • 95.25 mm(4)
    • 98.9 mm(1)
    • 101.601 mm(9)
    • 105.9 mm(1)
    • 107.95 mm(2)
    • 108.15 mm(1)
    • 110.15 mm(1)
    • 114.301 mm(1)
    • 116.95 mm(1)
    • 120.65 mm(1)
    • 126.176 mm(1)
    • 127.95 mm(1)
    • 133.55 mm(1)
    • 135.55 mm(1)
    • 139.701 mm(1)
    • 142.35 mm(1)
    • 146.05 mm(1)
    • 151.576 mm(1)
    • 152.4 mm(8)
    • 153.35 mm(1)
    • 158.951 mm(1)
    • 160.951 mm(1)
    • 167.75 mm(1)
    • 176.976 mm(1)
    • 178.75 mm(1)
    • 184.351 mm(1)
    • 186.351 mm(1)
    • 193.15 mm(1)
    • 202.375 mm(1)
    • 204.15 mm(1)
    • 209.75 mm(1)
    • 218.55 mm(1)
    • 227.775 mm(1)
    • 229.55 mm(1)
    • 265.875 mm(1)
    • 266.7 mm(1)
    • 291.276 mm(1)
    • 317.5 mm(1)
    • 330.201 mm(1)
    Front End Size
    Front End Size
    • 0.237 in(7)
    • 0.25 in(4)
    • 0.313 in(2)
    • 0.315 in(7)
    • 0.375 in(4)
    • 0.394 in(7)
    • 0.473 in(7)
    • 0.5 in(5)
    • 0.551 in(2)
    • 0.625 in(4)
    • 0.63 in(7)
    • 0.709 in(5)
    • 0.75 in(16)
    • 0.787 in(8)
    • 0.866 in(5)
    • 0.875 in(1)
    • 0.984 in(6)
    • 1.0 in(21)
    • 1.063 in(6)
    • 1.25 in(13)
    • 1.26 in(12)
    • 1.5 in(10)
    • 1.575 in(6)
    • 1.969 in(7)
    • 2.0 in(4)
    • 2.362 in(2)
    • 2.48 in(4)
    • 2.5 in(3)
    • 3.15 in(3)
    • 3.938 in(1)
    Front End Size MinkomuFront End Size Max
    Front End Size
    Front End Size
    • 6.0 mm(7)
    • 6.351 mm(4)
    • 7.95 mm(2)
    • 8.0 mm(7)
    • 9.525 mm(4)
    • 10.0 mm(7)
    • 12.0 mm(7)
    • 12.701 mm(5)
    • 14.0 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(7)
    • 18.0 mm(5)
    • 19.05 mm(16)
    • 20.0 mm(8)
    • 22.0 mm(5)
    • 22.225 mm(1)
    • 25.0 mm(6)
    • 25.401 mm(21)
    • 27.0 mm(6)
    • 31.75 mm(13)
    • 32.0 mm(12)
    • 38.1 mm(10)
    • 40.0 mm(6)
    • 50.0 mm(7)
    • 50.801 mm(4)
    • 60.0 mm(2)
    • 63.0 mm(4)
    • 63.5 mm(3)
    • 80.0 mm(3)
    • 100.0 mm(1)
    Front End Size MinkomuFront End Size Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (14)
    • B L (10)
    • C A (31)
    • C N (30)
    • D P (11)
    • H T (13)
    • H W (50)
    backEnd
    Connection Type
    Connection Type
    • TAPER SHANK (19)
    System Size
    System Size
    • BTF46 (33)
    • KM4X100 (182)
    • KM4X63 (9)
    Back-End Diameter
    Back-End Diameter
    • 46.026 mm(31)
    • 63.0 mm(9)
    • 68.976 mm(1)
    • 100.0 mm(215)
    • 103.976 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.812 in(31)
    • 2.48 in(9)
    • 2.716 in(1)
    • 3.938 in(215)
    • 4.094 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Adaptéry KM4X100™
    (197)

    Adaptéry KM4X100™

    Obráběcí jednotky KM4X100™
    (61)

    Obráběcí jednotky KM4X100™

    KM4X100™ • HPC • Řezné jednotky s vysokým tlakem chladicí kapaliny
    (4)

    KM4X100™ • HPC • Řezné jednotky s vysokým tlakem chladicí kapaliny

    Automatické upínací jednotky KM4X100™
    (2)

    Automatické upínací jednotky KM4X100™

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?