Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Specialty Turning • Tangentially Mounted Inserts (Fix-Perfect™ )

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (185)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(185)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(185)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(185)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(185)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(185)
    • M Stainless Steel (130)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(130)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(130)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(130)
    • K Cast Iron (124)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(124)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(124)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(124)
    • N Non-Ferrous Materials (65)
      • N1
        Wrought Aluminum (65)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(65)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (65)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (65)
      • N6
        Carbon, Graphite Composites, CFRP (65)
    • S High-Temp Alloys (110)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(110)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(110)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(110)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(110)
    • C CFRP Materials (48)
      • C1
        CFRP, CFRP / CFRP (48)
    Applications
    Applications
    • Multiple Direction CuttingMultiple Direction Cutting (18)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (113)
    • Lightly Interrupted Cut (119)
    • Smooth Cut (172)
    • Varying Depth of Cut (89)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (1)
    • 75.0 (5)
    • 90.0 (12)
    • 92.0 (4)
    • 93.0 (12)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Toolholder (34)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (94)
    • 4.0 (22)
    • 8.0 (73)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.921 in(8)
    • 5.906 in(16)
    • 6.0 in(3)
    • 6.694 in(4)
    • 7.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 125.0 mm(8)
    • 150.0 mm(16)
    • 152.4 mm(3)
    • 170.0 mm(4)
    • 177.8 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.012 in(64)
    • 0.016 in(39)
    • 0.02 in(82)
    • 0.031 in(64)
    • 0.039 in(16)
    • 0.047 in(25)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.301 mm(64)
    • 0.4 mm(39)
    • 0.5 mm(82)
    • 0.8 mm(64)
    • 1.0 mm(16)
    • 1.201 mm(25)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(153)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(153)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCM15 (16)
    • KCP10 (42)
    • KCP25 (77)
    • KCP40 (51)
    • KCU10 (56)
    • KCU10B (48)
    • KCU25 (50)
    • KCU25B (29)
    Hand Of Tool
    Hand Of Tool
    • L (11)
    • R (23)
    Wiper Insert
    Wiper Insert
    • N (185)
    F Dimension
    F Dimension
    • 14.0 mm(1)
    • 17.0 mm(3)
    • 21.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(5)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(16)
    • 38.1 mm(1)
    • 40.0 mm(1)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.551 in(1)
    • 0.669 in(3)
    • 0.828 in(1)
    • 0.946 in(1)
    • 0.984 in(5)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.25 in(3)
    • 1.26 in(16)
    • 1.5 in(1)
    • 1.575 in(1)
    F Dimension MinkomuF Dimension Max
    Cutting Direction
    Cutting Direction
    • E (1)
    • S (33)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (7)
    • DOUBLE POSITIVE (3)
    • POSITIVE-NEGATIVE (8)
    • POSITIVE-ZERO (14)
    frontEnd
    Clamp Style
    Clamp Style
    • X (34)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (19)
    • D-DIAMOND/RHOMBIC 55 (16)
    • FIX-PERFECT 2 CUT EDGES (76)
    • FIX-PERFECT 4 CUT EDGES (14)
    • FIX-PERFECT 8 CUT EDGES (62)
    insertGeometry
    Shape
    Shape
    • C-DIAMOND/RHOMBIC 80 (19)
    • D-DIAMOND/RHOMBIC 55 (16)
    • FIX-PERFECT 2 CUT EDGES (62)
    • FIX-PERFECT 4 CUT EDGES (10)
    • FIX-PERFECT 8 CUT EDGES (46)
    Cutting Edge Length
    Cutting Edge Length
    • 6.7 mm(7)
    • 6.9 mm(4)
    • 7.0 mm(2)
    • 7.101 mm(6)
    • 7.2 mm(4)
    • 7.301 mm(10)
    • 7.801 mm(1)
    • 8.6 mm(2)
    • 8.8 mm(2)
    • 8.9 mm(7)
    • 9.3 mm(8)
    • 10.0 mm(13)
    • 10.101 mm(5)
    • 10.5 mm(8)
    • 10.601 mm(4)
    • 10.701 mm(10)
    • 10.9 mm(2)
    • 11.101 mm(1)
    • 13.601 mm(5)
    • 13.9 mm(7)
    • 14.0 mm(3)
    • 14.101 mm(9)
    • 14.201 mm(2)
    • 14.5 mm(12)
    • 14.601 mm(6)
    • 14.701 mm(9)
    • 17.5 mm(4)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.264 in(7)
    • 0.272 in(4)
    • 0.276 in(2)
    • 0.28 in(6)
    • 0.284 in(4)
    • 0.288 in(10)
    • 0.307 in(1)
    • 0.339 in(2)
    • 0.347 in(2)
    • 0.351 in(7)
    • 0.366 in(8)
    • 0.394 in(13)
    • 0.398 in(5)
    • 0.414 in(8)
    • 0.417 in(4)
    • 0.421 in(10)
    • 0.429 in(2)
    • 0.437 in(1)
    • 0.535 in(5)
    • 0.547 in(7)
    • 0.551 in(3)
    • 0.555 in(9)
    • 0.559 in(2)
    • 0.572 in(12)
    • 0.576 in(6)
    • 0.579 in(9)
    • 0.69 in(4)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • FN (3)
    • HP (24)
    • MN (57)
    • MP (17)
    • MS (8)
    • RN (29)
    • RP (14)
    Cutting Tool Material
    Cutting Tool Material
    • H W (185)
    Tolerance Class
    Tolerance Class
    • M (153)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (34)
    Shank Height
    Shank Height
    • 0.473 in(1)
    • 0.63 in(1)
    • 0.787 in(8)
    • 0.984 in(16)
    • 1.0 in(3)
    • 1.25 in(1)
    • 1.26 in(4)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 12.0 mm(1)
    • 16.0 mm(1)
    • 20.0 mm(8)
    • 25.0 mm(16)
    • 25.401 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(4)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.473 in(1)
    • 0.63 in(1)
    • 0.787 in(8)
    • 0.984 in(18)
    • 1.0 in(3)
    • 1.25 in(1)
    • 1.26 in(2)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(1)
    • 16.0 mm(1)
    • 20.0 mm(8)
    • 25.0 mm(18)
    • 25.401 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(2)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Břitové destičky
    (153)

    Břitové destičky

    Držáky nástrojů
    (34)

    Držáky nástrojů

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?