Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

A4™ • Double-Ended Grooving

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (531)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(531)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(531)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(531)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(531)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(531)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(531)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(531)
    • M Stainless Steel (519)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(519)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(519)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(519)
    • K Cast Iron (534)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(534)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(530)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(525)
    • N Non-Ferrous Materials (523)
      • N1
        Wrought Aluminum (523)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(520)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(190)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (523)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (520)
      • N6
        Carbon, Graphite Composites, CFRP (520)
      • N7
        MMC's (190)
    • S High-Temp Alloys (528)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(528)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(528)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(528)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(522)
    • H Hardened Materials (439)
      • H1
        Hardened Materials 44-48 HRC(439)
      • H2
        Hardened Materials 48-55 HRC(424)
      • H3
        Hardened Materials 56-60 HRC(245)
      • H4
        Hardened Materials >60 HRC(245)
    Vybrat první volbu
    • BR (15)
    • CN (121)
    • DE (121)
    • GB (68)
    • IN (30)
    • SG (41)
    • US (176)
    Applications
    Applications
    • Back BoringBack Boring (25)
    • BoringBoring (123)
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (140)
    • Deep GroovingDeep Grooving (103)
    • Face GroovingFace Grooving (275)
    • FacingFacing (96)
    • GroovingGrooving (378)
    • ID FacingID Facing (25)
    • ID GroovingID Grooving (167)
    • Multiple Direction CuttingMultiple Direction Cutting (370)
    • Plunge TurningPlunge Turning (100)
    • ProfilingProfiling (255)
    • TRN BoringTRN Boring (44)
    • TurningTurning (226)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (456)
    • Lightly Interrupted Cut (487)
    • Smooth Cut (534)
    • Varying Depth of Cut (528)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (354)
    • 92.25 (27)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (55)
    • Toolholder (157)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (172)
    • 2.0 (424)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.077 in(31)
    • 2.156 in(47)
    • 2.269 in(21)
    • 2.352 in(14)
    • 4.5 in(23)
    • 4.921 in(57)
    • 4.933 in(12)
    • 5.0 in(20)
    • 5.463 in(2)
    • 5.508 in(6)
    • 5.906 in(39)
    • 5.915 in(2)
    • 5.917 in(4)
    • 5.961 in(4)
    • 6.0 in(53)
    • 6.25 in(2)
    • 6.694 in(11)
    • 6.703 in(2)
    • 7.0 in(3)
    • 7.875 in(12)
    • 7.931 in(7)
    • 8.012 in(4)
    • 8.019 in(6)
    • 8.02 in(4)
    • 9.843 in(6)
    • 10.02 in(3)
    • 10.025 in(1)
    • 11.811 in(6)
    • 12.0 in(1)
    • 12.02 in(3)
    • 12.025 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 52.75 mm(31)
    • 54.75 mm(47)
    • 57.625 mm(21)
    • 59.75 mm(14)
    • 114.301 mm(23)
    • 125.0 mm(57)
    • 125.301 mm(12)
    • 127.0 mm(20)
    • 138.75 mm(2)
    • 139.9 mm(6)
    • 150.0 mm(39)
    • 150.25 mm(2)
    • 150.3 mm(4)
    • 151.4 mm(4)
    • 152.4 mm(53)
    • 158.75 mm(2)
    • 170.0 mm(11)
    • 170.25 mm(2)
    • 177.8 mm(3)
    • 200.0 mm(12)
    • 201.451 mm(7)
    • 203.5 mm(4)
    • 203.675 mm(6)
    • 203.701 mm(4)
    • 250.0 mm(6)
    • 254.5 mm(3)
    • 254.601 mm(1)
    • 300.0 mm(6)
    • 304.8 mm(1)
    • 305.3 mm(3)
    • 305.401 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(9)
    • 0.008 in(242)
    • 0.016 in(282)
    • 0.031 in(192)
    • 0.034 in(62)
    • 0.039 in(95)
    • 0.041 in(78)
    • 0.047 in(78)
    • 0.048 in(18)
    • 0.06 in(115)
    • 0.063 in(88)
    • 0.079 in(74)
    • 0.08 in(72)
    • 0.094 in(70)
    • 0.098 in(63)
    • 0.099 in(61)
    • 0.119 in(64)
    • 0.12 in(62)
    • 0.125 in(63)
    • 0.156 in(20)
    • 0.157 in(25)
    • 0.158 in(28)
    • 0.187 in(8)
    • 0.188 in(10)
    • 0.197 in(12)
    • 0.198 in(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(9)
    • 0.2 mm(242)
    • 0.4 mm(282)
    • 0.8 mm(192)
    • 0.851 mm(62)
    • 1.0 mm(95)
    • 1.05 mm(78)
    • 1.201 mm(78)
    • 1.225 mm(18)
    • 1.5 mm(103)
    • 1.526 mm(90)
    • 1.6 mm(88)
    • 2.0 mm(74)
    • 2.025 mm(72)
    • 2.375 mm(70)
    • 2.5 mm(63)
    • 2.526 mm(61)
    • 3.0 mm(64)
    • 3.026 mm(62)
    • 3.176 mm(63)
    • 3.975 mm(20)
    • 4.0 mm(25)
    • 4.025 mm(28)
    • 4.75 mm(8)
    • 4.775 mm(10)
    • 5.0 mm(12)
    • 5.025 mm(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(282)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(282)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (132)
    • K313 (343)
    • KB1630 (245)
    • KB5625 (241)
    • KBH20 (241)
    • KC5010 (355)
    • KC5025 (364)
    • KC9110 (340)
    • KC9125 (340)
    • KCK20 (267)
    • KCP10 (345)
    • KCP25 (346)
    • KCU10 (395)
    • KCU10B (397)
    • KCU25 (415)
    • KCU25B (407)
    • KD1405 (190)
    • KMS (127)
    • KT315 (314)
    • KU10 (339)
    • KU30T (241)
    • KY3500 (272)
    • KYS30 (121)
    • SP88F8 (52)
    Hand Of Tool
    Hand Of Tool
    • L (112)
    • N (10)
    • R (142)
    Wiper Insert
    Wiper Insert
    • N (429)
    F Dimension
    F Dimension
    • 8.175 mm(1)
    • 8.225 mm(2)
    • 9.75 mm(1)
    • 10.226 mm(1)
    • 10.25 mm(1)
    • 12.101 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.726 mm(3)
    • 12.75 mm(2)
    • 12.8 mm(4)
    • 12.851 mm(2)
    • 12.9 mm(2)
    • 13.0 mm(7)
    • 13.025 mm(2)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.026 mm(1)
    • 16.1 mm(1)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 16.875 mm(5)
    • 17.0 mm(6)
    • 19.026 mm(1)
    • 19.075 mm(8)
    • 19.1 mm(1)
    • 19.125 mm(6)
    • 19.225 mm(3)
    • 19.25 mm(2)
    • 20.05 mm(6)
    • 20.1 mm(16)
    • 20.201 mm(22)
    • 20.3 mm(2)
    • 21.776 mm(1)
    • 21.8 mm(1)
    • 22.0 mm(4)
    • 25.05 mm(4)
    • 25.1 mm(8)
    • 25.201 mm(10)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.401 mm(1)
    • 25.425 mm(4)
    • 25.475 mm(7)
    • 25.5 mm(1)
    • 25.576 mm(4)
    • 25.701 mm(3)
    • 25.776 mm(1)
    • 25.875 mm(1)
    • 26.0 mm(2)
    • 27.901 mm(1)
    • 29.875 mm(3)
    • 30.0 mm(8)
    • 30.401 mm(1)
    • 30.8 mm(1)
    • 33.1 mm(1)
    • 34.875 mm(1)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.901 mm(1)
    • 39.1 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.322 in(1)
    • 0.324 in(2)
    • 0.384 in(1)
    • 0.403 in(1)
    • 0.404 in(1)
    • 0.477 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.501 in(3)
    • 0.502 in(2)
    • 0.504 in(4)
    • 0.506 in(2)
    • 0.508 in(2)
    • 0.512 in(7)
    • 0.513 in(2)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.631 in(1)
    • 0.634 in(1)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.664 in(5)
    • 0.669 in(6)
    • 0.749 in(1)
    • 0.751 in(8)
    • 0.752 in(1)
    • 0.753 in(6)
    • 0.757 in(3)
    • 0.758 in(2)
    • 0.789 in(6)
    • 0.791 in(16)
    • 0.795 in(22)
    • 0.799 in(2)
    • 0.857 in(1)
    • 0.858 in(1)
    • 0.866 in(4)
    • 0.986 in(4)
    • 0.988 in(8)
    • 0.992 in(10)
    • 0.996 in(2)
    • 0.997 in(2)
    • 1.0 in(1)
    • 1.002 in(4)
    • 1.004 in(8)
    • 1.008 in(4)
    • 1.012 in(3)
    • 1.016 in(1)
    • 1.02 in(1)
    • 1.024 in(2)
    • 1.098 in(1)
    • 1.176 in(3)
    • 1.181 in(8)
    • 1.197 in(1)
    • 1.213 in(1)
    • 1.303 in(1)
    • 1.373 in(1)
    • 1.383 in(1)
    • 1.395 in(1)
    • 1.532 in(1)
    • 1.539 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(4)
    • 17.0 mm(3)
    • 20.0 mm(6)
    • 21.0 mm(3)
    • 25.0 mm(21)
    • 26.0 mm(5)
    • 32.0 mm(11)
    • 36.0 mm(5)
    • 38.0 mm(1)
    • 40.0 mm(6)
    • 42.0 mm(5)
    • 44.0 mm(4)
    • 48.0 mm(3)
    • 50.0 mm(3)
    • 52.0 mm(14)
    • 58.0 mm(4)
    • 60.0 mm(4)
    • 64.0 mm(4)
    • 65.0 mm(1)
    • 68.0 mm(4)
    • 70.0 mm(7)
    • 80.0 mm(7)
    • 90.0 mm(8)
    • 92.0 mm(3)
    • 100.0 mm(4)
    • 120.0 mm(13)
    • 130.0 mm(4)
    • 132.0 mm(4)
    • 184.0 mm(3)
    • 200.0 mm(8)
    • 250.0 mm(6)
    • 290.0 mm(8)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.63 in(4)
    • 0.669 in(3)
    • 0.787 in(6)
    • 0.828 in(3)
    • 0.984 in(21)
    • 1.024 in(5)
    • 1.26 in(11)
    • 1.417 in(5)
    • 1.496 in(1)
    • 1.575 in(6)
    • 1.655 in(5)
    • 1.732 in(4)
    • 1.891 in(3)
    • 1.969 in(3)
    • 2.047 in(14)
    • 2.283 in(4)
    • 2.362 in(4)
    • 2.52 in(4)
    • 2.559 in(1)
    • 2.677 in(4)
    • 2.757 in(7)
    • 3.15 in(7)
    • 3.543 in(8)
    • 3.622 in(3)
    • 3.938 in(4)
    • 4.724 in(13)
    • 5.118 in(4)
    • 5.197 in(4)
    • 7.244 in(3)
    • 7.875 in(8)
    • 9.843 in(6)
    • 11.417 in(8)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(4)
    • 0.828 in(3)
    • 0.906 in(1)
    • 0.984 in(6)
    • 1.024 in(2)
    • 1.063 in(9)
    • 1.102 in(7)
    • 1.339 in(7)
    • 1.379 in(2)
    • 1.417 in(13)
    • 1.811 in(1)
    • 1.891 in(4)
    • 2.126 in(2)
    • 2.283 in(4)
    • 2.52 in(3)
    • 2.835 in(3)
    • 2.914 in(3)
    • 3.307 in(4)
    • 3.701 in(4)
    • 3.938 in(8)
    • 4.409 in(4)
    • 4.882 in(3)
    • 5.354 in(4)
    • 5.906 in(3)
    • 6.299 in(4)
    • 7.875 in(2)
    • 8.346 in(4)
    • 10.0 in(4)
    • 11.811 in(12)
    • 39.331 in(11)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(4)
    • 21.0 mm(3)
    • 23.0 mm(1)
    • 25.0 mm(6)
    • 26.0 mm(2)
    • 27.0 mm(9)
    • 28.0 mm(7)
    • 34.0 mm(7)
    • 35.0 mm(2)
    • 36.0 mm(13)
    • 46.0 mm(1)
    • 48.0 mm(4)
    • 54.0 mm(2)
    • 58.0 mm(4)
    • 64.0 mm(3)
    • 72.0 mm(3)
    • 74.0 mm(3)
    • 84.0 mm(4)
    • 94.0 mm(4)
    • 100.0 mm(8)
    • 112.0 mm(4)
    • 124.0 mm(3)
    • 136.0 mm(4)
    • 150.0 mm(3)
    • 160.0 mm(4)
    • 200.0 mm(2)
    • 212.0 mm(4)
    • 254.0 mm(4)
    • 300.0 mm(12)
    • 999.0 mm(11)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (210)
    • S (54)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (14)
    • NEUTRAL (ZERO) (58)
    • POSITIVE-ZERO (146)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.575 in(11)
    • 1.969 in(7)
    • 1.98 in(4)
    • 2.5 in(1)
    • 2.511 in(1)
    • 2.52 in(11)
    • 3.0 in(1)
    • 3.15 in(13)
    • 3.938 in(4)
    • 4.0 in(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 40.0 mm(11)
    • 50.0 mm(7)
    • 50.301 mm(4)
    • 63.5 mm(1)
    • 63.75 mm(1)
    • 64.0 mm(11)
    • 76.2 mm(1)
    • 80.0 mm(13)
    • 100.0 mm(4)
    • 101.601 mm(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (55)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (3)
    Clamp Style
    Clamp Style
    • Y (381)
    Cutting Width
    Cutting Width
    • 0.06 in(9)
    • 0.079 in(95)
    • 0.084 in(95)
    • 0.094 in(1)
    • 0.095 in(1)
    • 0.097 in(1)
    • 0.098 in(1)
    • 0.104 in(1)
    • 0.119 in(103)
    • 0.12 in(79)
    • 0.122 in(78)
    • 0.123 in(101)
    • 0.125 in(88)
    • 0.13 in(78)
    • 0.157 in(74)
    • 0.161 in(62)
    • 0.162 in(74)
    • 0.187 in(70)
    • 0.193 in(62)
    • 0.197 in(63)
    • 0.199 in(49)
    • 0.201 in(49)
    • 0.202 in(62)
    • 0.237 in(64)
    • 0.239 in(52)
    • 0.241 in(62)
    • 0.25 in(63)
    • 0.256 in(52)
    • 0.312 in(18)
    • 0.313 in(20)
    • 0.315 in(25)
    • 0.317 in(18)
    • 0.319 in(18)
    • 0.32 in(28)
    • 0.375 in(10)
    • 0.382 in(8)
    • 0.394 in(12)
    • 0.396 in(8)
    • 0.399 in(15)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.5 mm(9)
    • 2.0 mm(95)
    • 2.125 mm(95)
    • 2.375 mm(1)
    • 2.401 mm(1)
    • 2.475 mm(1)
    • 2.5 mm(1)
    • 2.625 mm(1)
    • 3.0 mm(103)
    • 3.051 mm(79)
    • 3.1 mm(78)
    • 3.125 mm(101)
    • 3.176 mm(88)
    • 3.301 mm(78)
    • 4.0 mm(74)
    • 4.101 mm(62)
    • 4.125 mm(74)
    • 4.75 mm(70)
    • 4.9 mm(62)
    • 5.0 mm(63)
    • 5.051 mm(49)
    • 5.101 mm(49)
    • 5.125 mm(62)
    • 6.0 mm(64)
    • 6.051 mm(52)
    • 6.125 mm(62)
    • 6.351 mm(63)
    • 6.5 mm(52)
    • 7.926 mm(18)
    • 7.95 mm(20)
    • 8.0 mm(25)
    • 8.05 mm(18)
    • 8.1 mm(18)
    • 8.125 mm(28)
    • 9.525 mm(10)
    • 9.701 mm(8)
    • 10.0 mm(12)
    • 10.05 mm(8)
    • 10.125 mm(15)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (3)
    Insert Shape
    Insert Shape
    • PRISMATIC (546)
    Cartridge Size
    Cartridge Size
    • 50 (95)
    • 65 (22)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (3)
    Insert Size
    Insert Size
    • 10 (4)
    • 2 (42)
    • 2S (11)
    • 3 (44)
    • 3S (8)
    • 4 (44)
    • 4S (1)
    • 5 (34)
    • 5S (1)
    • 6 (38)
    • 8 (14)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(29)
    • 0.197 in(3)
    • 0.276 in(13)
    • 0.315 in(10)
    • 0.354 in(1)
    • 0.394 in(17)
    • 0.433 in(4)
    • 0.473 in(43)
    • 0.531 in(9)
    • 0.551 in(98)
    • 0.572 in(4)
    • 0.63 in(16)
    • 0.669 in(41)
    • 0.69 in(3)
    • 0.748 in(22)
    • 0.787 in(22)
    • 0.866 in(4)
    • 0.946 in(29)
    • 1.024 in(13)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(29)
    • 5.0 mm(3)
    • 7.0 mm(13)
    • 8.0 mm(10)
    • 9.0 mm(1)
    • 10.0 mm(17)
    • 11.0 mm(4)
    • 12.0 mm(43)
    • 13.5 mm(9)
    • 14.0 mm(98)
    • 14.5 mm(4)
    • 16.0 mm(16)
    • 17.0 mm(41)
    • 17.5 mm(3)
    • 19.0 mm(22)
    • 20.0 mm(22)
    • 22.0 mm(4)
    • 24.0 mm(29)
    • 26.0 mm(13)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 6 in(4)
    • 7 in(2)
    • 2.303 in(1)
    • 2.5 in(2)
    • 5.439 in(1)
    • 5.463 in(2)
    • 5.482 in(2)
    • 5.508 in(6)
    • 5.529 in(4)
    • 5.533 in(3)
    • 5.906 in(2)
    • 6.25 in(2)
    • 6.271 in(2)
    • 6.694 in(1)
    Gage Length
    Gage Length
    • 150 mm(2)
    • 170 mm(1)
    • 58.5 mm(1)
    • 63.5 mm(2)
    • 138.15 mm(1)
    • 138.75 mm(2)
    • 139.25 mm(2)
    • 139.9 mm(6)
    • 140.4 mm(4)
    • 140.55 mm(3)
    • 152.4 mm(4)
    • 158.75 mm(2)
    • 159.25 mm(2)
    • 177.8 mm(2)
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 1.651 mm(6)
    • 1.75 mm(6)
    • 2.475 mm(6)
    • 2.5 mm(2)
    • 2.575 mm(8)
    • 2.725 mm(6)
    • 3.45 mm(8)
    • 3.801 mm(7)
    • 4.075 mm(6)
    • 4.101 mm(1)
    • 4.15 mm(8)
    • 4.2 mm(1)
    • 4.4 mm(1)
    • 4.801 mm(6)
    • 4.9 mm(8)
    • 5.0 mm(1)
    • 5.301 mm(6)
    • 6.351 mm(1)
    • 6.4 mm(6)
    • 6.5 mm(8)
    • 7.301 mm(2)
    • 8.201 mm(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.065 in(6)
    • 0.069 in(6)
    • 0.097 in(6)
    • 0.098 in(2)
    • 0.101 in(8)
    • 0.107 in(6)
    • 0.136 in(8)
    • 0.15 in(7)
    • 0.16 in(6)
    • 0.161 in(1)
    • 0.163 in(8)
    • 0.165 in(1)
    • 0.174 in(1)
    • 0.189 in(6)
    • 0.193 in(8)
    • 0.197 in(1)
    • 0.209 in(6)
    • 0.25 in(1)
    • 0.252 in(6)
    • 0.256 in(8)
    • 0.288 in(2)
    • 0.323 in(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 2.757 in(3)
    • 3.543 in(2)
    • 4.724 in(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (165)
    Insert Seat Size
    Insert Seat Size
    • 10 (13)
    • 2 (11)
    • 2S (1)
    • 3 (34)
    • 3S (1)
    • 4 (28)
    • 5 (24)
    • 5S (1)
    • 6 (33)
    • 8 (19)
    Cutting Tool Material
    Cutting Tool Material
    • B H (245)
    • B L (241)
    • C N (274)
    • D P (190)
    • H T (314)
    • H W (534)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (55)
    • SQUARE SHANK (209)
    System Size
    System Size
    • KM63XMZ (3)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(5)
    • 20.0 mm(8)
    • 25.0 mm(9)
    • 25.401 mm(7)
    • 31.75 mm(4)
    • 32.0 mm(6)
    • 38.1 mm(5)
    • 40.0 mm(6)
    • 50.801 mm(1)
    • 63.0 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.748 in(1)
    • 0.75 in(5)
    • 0.787 in(8)
    • 0.984 in(9)
    • 1.0 in(7)
    • 1.25 in(4)
    • 1.26 in(6)
    • 1.5 in(5)
    • 1.575 in(6)
    • 2.0 in(1)
    • 2.48 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(9)
    • 0.75 in(29)
    • 0.787 in(55)
    • 0.984 in(40)
    • 1.0 in(36)
    • 1.25 in(9)
    • 1.26 in(10)
    • 1.5 in(1)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(9)
    • 19.05 mm(29)
    • 20.0 mm(55)
    • 25.0 mm(40)
    • 25.401 mm(36)
    • 31.75 mm(9)
    • 32.0 mm(10)
    • 38.1 mm(1)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(10)
    • 0.742 in(1)
    • 0.75 in(28)
    • 0.787 in(54)
    • 0.984 in(50)
    • 1.0 in(36)
    • 1.25 in(9)
    • 1.5 in(1)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(10)
    • 18.85 mm(1)
    • 19.05 mm(28)
    • 20.0 mm(54)
    • 25.0 mm(50)
    • 25.401 mm(36)
    • 31.75 mm(9)
    • 38.1 mm(1)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Držáky nástrojů
    (287)

    Držáky nástrojů

    Břitové destičky A4™
    (165)

    Břitové destičky A4™

    Modulární nože
    (117)

    Modulární nože

    Vyvrtávací tyče
    (44)

    Vyvrtávací tyče

    Modulární nástroje
    (34)

    Modulární nástroje

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?