Drilling
Drilling: Stacked Plates
DIN number 6535
DIN number 6537
Flood Coolant: Drilling
Shank - Cylindrical Plain ≤h6
Shank - Cylindrical Whistle Notch 2°
Helix Angle: 30°Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 4150789 |
| ISO katalogové ID | B042A14200CPG |
| ANSI katalogové ID | B042A14200CPG |
| Grade | KC7325 |
| [D1] Drill Diameter M | 14.2 mm |
| [D1] Drill Diameter M | 0.5591 in |
| [L] Overall Length | 133 mm |
| [L] Overall Length | 5.2362 in |
| [L3] Flute Length | 83 mm |
| [L3] Flute Length | 3.2677 in |
| [L4] Maximum Drilling Depth | 63 mm |
| [L4] Maximum Drilling Depth | 2.4803 in |
| [L5] Drill Point Length | 2.45 mm |
| [L5] Drill Point Length | 0.0965 in |
| [LS] Shank Length | 48 mm |
| [LS] Shank Length | 1.8898 in |
| [D] Adapter / Shank / Bore Diameter | 16 mm |
| [D] Adapter / Shank / Bore Diameter | 0.6299 in |
DrillingDrilling: Stacked PlatesDIN number 6535DIN number 6537Flood Coolant: DrillingShank - Cylindrical Plain ≤h6Shank - Cylindrical Whistle Notch 2°Helix Angle: 30°Karbidy
KC7325
Composition: Multilayered PVD TiN-TiAlN coated fine-grain carbide with a TiN top layer for better wear identification.
Application: This multipurpose grade has been combined with a unique general-purpose cutting geometry to offer high versatility and reliability across all material groups at intermediate cutting conditions.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Tolerance • Palcové | ||
| Rozsah nominálních průměrů | Tolerance D1 | Tolerance D h6 |
| .0394–.1181 | .0000/-.0006 (h8) | .0000/-.0002 |
| .0000/-.0005 (h7) | .0000/-.0003 | |
| .0000/-.0006 (h7) | .0000/-.0004 | |
| .0000/-.0007 (h7) | .0000/-.0004 | |
| .0000/-.0008 (h7) | .0000/-.0005 | |
| Tolerance • Metrické | ||
| Rozsah nominálních průměrů | Tolerance D1 | Tolerance D h6 |
| 1–3 | 0,000/-0,014 (h8) | 0,000/-0,006 |
| 0,000/-0,012 (h7) | 0,000/-0,008 | |
| 0,000/-0,015 (h7) | 0,000/-0,009 | |
| 0,000/-0,018 (h7) | 0,000/-0,011 | |
| 0,000/-0,021 (h7) | 0,000/-0,013 | |
| mm | KRÁTKÉ* | dlouhé* | EXTRA DLOUHÉ** | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | ||||||||
| D1 min | D1 max | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| 1,000 | 1,400 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| 1,401 | 1,900 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| 1,901 | 2,300 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| 2,301 | 2,990 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| 3,000 | 3,750 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| 3,751 | 4,750 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| 4,751 | 6,000 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| 6,001 | 7,000 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| 7,001 | 8,000 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| 8,001 | 10,000 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| 10,001 | 12,000 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| 12,001 | 14,000 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| 14,001 | 16,000 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| 16,001 | 18,000 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| 18,001 | 20,000 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| 20,001 | 22,000 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| 22,001 | 25,000 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| * D1 20mm podle DIN 6537K | ||||||||||||
| * D1 | ||||||||||||
| ** podle firemních norem | ||||||||||||
| Materiálová skupina |  |  | |||||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||||
| Min | Počáteční hodnota | Max | 3/64 .047 | 5/64 .078 | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 200 | 230 | 330 | IPR | .001–.003 | .002–.004 | .002–.004 | .003–.005 | .004–.007 | .004–.009 | .005–.010 | .006–.012 | .007–.014 | .009–.018 |
| 1 | 200 | 230 | 330 | IPR | .002–.004 | .002–.004 | .002–.005 | .004–.006 | .004–.009 | .005–.010 | .006–.012 | .007–.014 | .009–.017 | .011–.021 | |
| 2 | 260 | 300 | 330 | IPR | .002–.004 | .002–.004 | .002–.005 | .003–.006 | .005–.009 | .006–.010 | .007–.012 | .008–.014 | .009–.017 | .012–.021 | |
| 3 | 160 | 230 | 300 | IPR | .002–.004 | .002–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.011 | .008–.013 | .009–.015 | .010–.019 | .013–.023 | |
| 4 | 160 | 230 | 330 | IPR | .002–.005 | .002–.005 | .002–.006 | .003–.007 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.019 | .011–.023 | |
| 5 | 100 | 130 | 200 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.006 | .004–.007 | .005–.009 | .006–.009 | .007–.013 | .009–.016 | |
| 6 | 100 | 130 | 200 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.006 | .004–.007 | .005–.009 | .006–.009 | .007–.013 | .009–.016 | |
| M | 1 | 70 | 100 | 130 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.007 | .006–.008 |
| 2 | 100 | 130 | 160 | IPR | .001–.002 | .001–.003 | .002–.003 | .002–.004 | .003–.005 | .004–.006 | .004–.006 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | 70 | 100 | 130 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.007 | .006–.008 | |
| K | 1 | 260 | 430 | 560 | IPR | .004–.007 | .004–.008 | .004–.009 | .005–.009 | .006–.012 | .008–.015 | .009–.017 | .010–.019 | .012–.024 | .015–.029 |
| 2 | 300 | 360 | 390 | IPR | .002–.005 | .003–.006 | .004–.007 | .005–.008 | .006–.010 | .008–.012 | .009–.014 | .010–.016 | .012–.019 | .015–.024 | |
| 3 | 260 | 360 | 430 | IPR | .002–.004 | .002–.005 | .003–.006 | .004–.008 | .005–.010 | .006–.012 | .007–.014 | .008–.016 | .010–.019 | .012–.024 | |
| N | 1 | 300 | 750 | 890 | IPR | .002–.005 | .002–.005 | .003–.006 | .004–.006 | .005–.008 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 300 | 720 | 890 | IPR | .002–.003 | .002–.005 | .003–.006 | .004–.008 | .005–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 740 | IPR | .004–.005 | .004–.006 | .005–.006 | .005–.006 | .006–.008 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.017 | |
| 4 | 300 | 430 | 890 | IPR | .002–.003 | .002–.005 | .003–.006 | .004–.008 | .005–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| S | 1 | 70 | 80 | 100 | IPR | .000–.002 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.005 | .004–.005 | .004–.006 | .005–.006 | .006–.007 |
| 2 | 30 | 70 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 | |
| 3 | 70 | 80 | 130 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | |
| 4 | 70 | 80 | 160 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 | |
| H | 1 | 30 | 50 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 |
| 2 | 30 | 30 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | |
| Materiálová skupina | | | |||||||||||||
| Řezná rychlost | Metrické | ||||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||||
| Min | Počáteční hodnota | Max | 1,0 | 2,0 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 70 | 80 | 115 | mm/ot | 0,03–0,08 | 0,04–0,09 | 0,05–0,11 | 0,08–0,14 | 0,09–0,19 | 0,11–0,22 | 0,13–0,26 | 0,15–0,30 | 0,19–0,36 | 0,24–0,46 |
| 1 | 60 | 70 | 100 | mm/ot | 0,04–0,09 | 0,05–0,11 | 0,06–0,13 | 0,09–0,16 | 0,11–0,22 | 0,13–0,26 | 0,15–0,31 | 0,18–0,35 | 0,22–0,42 | 0,28–0,54 | |
| 2 | 80 | 90 | 100 | mm/ot | 0,04–0,09 | 0,05–0,11 | 0,06–0,13 | 0,08–0,16 | 0,12–0,22 | 0,14–0,26 | 0,17–0,31 | 0,20–0,35 | 0,24–0,42 | 0,31–0,53 | |
| 3 | 50 | 70 | 90 | mm/ot | 0,05–0,11 | 0,06–0,13 | 0,07–0,15 | 0,09–0,17 | 0,13–0,23 | 0,15–0,28 | 0,19–0,33 | 0,22–0,38 | 0,26–0,47 | 0,34–0,59 | |
| 4 | 50 | 70 | 100 | mm/ot | 0,04–0,12 | 0,05–0,13 | 0,06–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 | |
| 5 | 30 | 40 | 60 | mm/ot | 0,03–0,05 | 0,04–0,06 | 0,05–0,07 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
| 6 | 30 | 40 | 60 | mm/ot | 0,03–0,05 | 0,04–0,06 | 0,05–0,07 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
| M | 1 | 20 | 30 | 40 | mm/ot | 0,02–0,05 | 0,03–0,06 | 0,04–0,07 | 0,05–0,09 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,16–0,20 |
| 2 | 30 | 40 | 50 | mm/ot | 0,02–0,06 | 0,03–0,07 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | |
| 3 | 20 | 30 | 40 | mm/ot | 0,02–0,05 | 0,03–0,06 | 0,04–0,07 | 0,06–0,09 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,16–0,20 | |
| K | 1 | 80 | 130 | 170 | mm/ot | 0,09–0,18 | 0,10–0,20 | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,60 | 0,38–0,74 |
| 2 | 90 | 110 | 120 | mm/ot | 0,06–0,13 | 0,08–0,15 | 0,10–0,17 | 0,12–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
| 3 | 80 | 110 | 130 | mm/ot | 0,05–0,11 | 0,06–0,13 | 0,07–0,15 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,25–0,48 | 0,30–0,60 | |
| N | 1 | 90 | 230 | 270 | mm/ot | 0,05–0,12 | 0,06–0,13 | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 90 | 220 | 270 | mm/ot | 0,04–0,08 | 0,06–0,12 | 0,08–0,16 | 0,10–0,20 | 0,12–0,24 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,44 | 0,32–0,52 | |
| 3 | 90 | 180 | 225 | mm/ot | 0,10–0,13 | 0,11–0,14 | 0,12–0,14 | 0,13–0,16 | 0,14–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,44 | |
| 4 | 90 | 130 | 270 | mm/ot | 0,04–0,08 | 0,06–0,12 | 0,08–0,16 | 0,10–0,20 | 0,12–0,24 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,48 | |
| S | 1 | 20 | 25 | 30 | mm/ot | 0,01–0,04 | 0,02–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
| 2 | 10 | 20 | 30 | mm/ot | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
| 3 | 20 | 25 | 40 | mm/ot | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
| 4 | 20 | 25 | 50 | mm/ot | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
| H | 1 | 10 | 15 | 30 | mm/ot | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |
| 2 | 10 | 10 | 30 | mm/ot | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
| | ||||||||||||||
| Řezná rychlost | Metrické | ||||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 1,0 | 2,0 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 70 | 80 | 115 | mm/dev | 0,03 | 0,04 | 0,05 | 0,08 | 0,09 | 0,11 | 0,13 | 0,15 | 0,19 | 0,24 |
| 1 | 60 | 70 | 100 | mm/dev | 0,04 | 0,05 | 0,06 | 0,09 | 0,11 | 0,13 | 0,15 | 0,18 | 0,22 | 0,28 | |
| 2 | 80 | 90 | 100 | mm/dev | 0,04 | 0,05 | 0,06 | 0,08 | 0,12 | 0,14 | 0,17 | 0,20 | 0,24 | 0,31 | |
| 3 | 50 | 70 | 90 | mm/dev | 0,05 | 0,06 | 0,07 | 0,09 | 0,13 | 0,15 | 0,19 | 0,22 | 0,26 | 0,34 | |
| 4 | 50 | 70 | 100 | mm/dev | 0,04 | 0,05 | 0,06 | 0,08 | 0,12 | 0,14 | 0,17 | 0,19 | 0,23 | 0,29 | |
| 5 | 30 | 40 | 60 | mm/dev | 0,03 | 0,04 | 0,05 | 0,06 | 0,08 | 0,10 | 0,12 | 0,14 | 0,18 | 0,23 | |
| 6 | 30 | 40 | 60 | mm/dev | 0,03 | 0,04 | 0,05 | 0,06 | 0,08 | 0,10 | 0,12 | 0,14 | 0,18 | 0,23 | |
| M | 1 | 20 | 30 | 40 | mm/dev | 0,02 | 0,03 | 0,04 | 0,05 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 |
| 2 | 30 | 40 | 50 | mm/dev | 0,02 | 0,03 | 0,04 | 0,06 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 | |
| 3 | 20 | 30 | 40 | mm/dev | 0,02 | 0,03 | 0,04 | 0,06 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 | |
| K | 1 | 80 | 130 | 170 | mm/dev | 0,09 | 0,10 | 0,11 | 0,12 | 0,16 | 0,20 | 0,23 | 0,25 | 0,31 | 0,38 |
| 2 | 90 | 110 | 120 | mm/dev | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,23 | 0,25 | 0,31 | 0,38 | |
| 3 | 80 | 110 | 130 | mm/dev | 0,05 | 0,06 | 0,07 | 0,09 | 0,12 | 0,14 | 0,17 | 0,19 | 0,25 | 0,30 | |
| N | 1 | 90 | 230 | 270 | mm/dev | 0,05 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 |
| 2 | 90 | 220 | 270 | mm/dev | 0,04 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| 3 | 90 | 180 | 225 | mm/dev | 0,10 | 0,11 | 0,12 | 0,13 | 0,14 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| 5 | 90 | 130 | 270 | mm/dev | 0,04 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| S | 1 | 20 | 25 | 30 | mm/dev | 0,01 | 0,02 | 0,03 | 0,04 | 0,06 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 |
| 2 | 10 | 20 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 | |
| 3 | 20 | 25 | 40 | mm/dev | 0,01 | 0,02 | 0,02 | 0,02 | 0,04 | 0,06 | 0,07 | 0,08 | 0,09 | 0,10 | |
| 4 | 20 | 25 | 50 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 | |
| H | 1 | 10 | 15 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 |
| 2 | 10 | 10 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,02 | 0,04 | 0,06 | 0,07 | 0,08 | 0,09 | 0,10 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?