Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 2390263 |
| ISO katalogové ID | SEKT1404AESNGP2 |
| ANSI katalogové ID | SEKT443AESN7GP2 |
| Grade | KCK15 |
| [D] Insert IC Size | 14 mm |
| [D] Insert IC Size | .5512 in |
| [BS] Corner Facet Length | 2.645 mm |
| [BS] Corner Facet Length | .104 in |
| [L10] Insert Cutting Edge Length | 14 mm |
| [L10] Insert Cutting Edge Length | .5512 in |
| [Rε] Corner Radius | 1 mm |
| [Rε] Corner Radius | .039 in |
| [S] Insert Thickness | 4.763 mm |
| [S] Insert Thickness | .1875 in |
| Average Chip Thickness [HM] | 0.108 mm |
| Average Chip Thickness [HM] | .0043 in |
| Cutting Edges per Insert | 4 |
Karbidy
KCK15
Coated carbide grade with CVD multilayer coating (TiN/MT TiCN/Al2O3) and advanced Beyond™ post-coat treatment. KCK15 is a wear-resistant grade with balanced toughness for general milling of cast irons at higher speeds. Best results in dry, but can also be used wet.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| (Lehká geometrie) | – | (Silná geometrie) | ||||
| Odolnost proti opotřebení |  | Houževnatost | ||||
| Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta | |
| P1–P2 | .E..GP2 | KCPM40 | .E..GB2 | KCPM40 | .S..GB2 | KCPM40 |
| P3–P4 | .E..GP2 | KCPK30 | .E..GB2 | KCPK30 | .S..GB2 | KCPK30 |
| P5–P6 | .E..GP2 | KC725M | .E..GB2 | KC725M | .S..GB2 | KC725M |
| M1–M2 | .E..LD2 | KC725M | .E..GP2 | KC725M | .S..GP2 | KC725M |
| M3 | .E..GP2 | KCPM40 | .E..GB2 | KCPM40 | .S..GP2 | KCPM40 |
| K1–K2 | .E..GP2 | KCK15 | .E..GB2 | KCK15 | .S..GB2 | KCK15 |
| K3 | .E..GP2 | KC520M | .E..GB2 | KC520M | .S..GB2 | KC520M |
| N1–N2 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| N3 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| S1–S2 | .E..LD2 | KC725M | .E..GP2 | KC725M | .S..GP2 | KC725M |
| S3 | .E..GB2 | KC725M | .S..GP2 | KC725M | .S..GB2 | KC725M |
| S4 | .E..GB2 | KC725M | .S..GP2 | KC725M | .S..GB2 | KC725M |
| H1 | – | – | – | – | – | – |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LE | 0,17 | 0,59 | 0,99 | 0,12 | 0,43 | 0,71 | 0,09 | 0,32 | 0,53 | 0,08 | 0,28 | 0,46 | 0,07 | 0,25 | 0,42 | .F..LE |
| .E..LD2 | 0,17 | 0,62 | 1,15 | 0,13 | 0,45 | 0,82 | 0,10 | 0,34 | 0,61 | 0,08 | 0,29 | 0,53 | 0,08 | 0,27 | 0,49 | .E..LD2 |
| .E..LD | 0,24 | 0,67 | 1,17 | 0,17 | 0,48 | 0,84 | 0,13 | 0,36 | 0,62 | 0,11 | 0,31 | 0,54 | 0,10 | 0,29 | 0,50 | .E..LD |
| .E..GP | 0,17 | 0,62 | 1,26 | 0,13 | 0,45 | 0,90 | 0,10 | 0,34 | 0,67 | 0,08 | 0,29 | 0,59 | 0,08 | 0,27 | 0,54 | .E..GP |
| .E..GP2 | 0,24 | 0,74 | 1,27 | 0,17 | 0,53 | 0,91 | 0,13 | 0,40 | 0,68 | 0,11 | 0,35 | 0,59 | 0,10 | 0,32 | 0,54 | .E..GP2 |
| .E..GB2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .E..GB2 |
| .S..GP2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GP2 |
| .S..GB2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GB2 |
| .S..GN | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GN |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LE | .007 | .024 | .040 | .005 | .017 | .029 | .004 | .013 | .021 | .003 | .011 | .019 | .003 | .010 | .017 | .F..LE |
| .E..LD2 | .007 | .025 | .045 | .005 | .018 | .032 | .004 | .013 | .024 | .003 | .012 | .021 | .003 | .011 | .019 | .E..LD2 |
| .E..LD | .009 | .026 | .046 | .007 | .019 | .033 | .005 | .014 | .024 | .004 | .012 | .021 | .004 | .011 | .020 | .E..LD |
| .E..GP | .007 | .025 | .050 | .005 | .018 | .036 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .021 | .E..GP |
| .E..GP2 | .009 | .029 | .050 | .007 | .021 | .036 | .005 | .016 | .027 | .004 | .014 | .023 | .004 | .012 | .021 | .E..GP2 |
| .E..GB2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .E..GB2 |
| .S..GP2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GP2 |
| .S..GB2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GB2 |
| .S..GN | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GN |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Materiálová skupina | KC410M | KC520M | KC725M | KCK15 | KCPM20 | KCPK30 | KY3500 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 315 | 275 | 255 | – | – | – | 660 | 580 | 535 | 545 | 475 | 440 | – | – | – |
| 2 | – | – | – | – | – | – | 260 | 230 | 195 | – | – | – | 410 | 370 | 330 | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | – | – | – | 240 | 205 | 170 | – | – | – | 370 | 330 | 305 | 305 | 275 | 250 | – | – | – | |
| 4 | – | – | – | – | – | – | 215 | 180 | 145 | – | – | – | 275 | 255 | 230 | 225 | 210 | 190 | – | – | – | |
| 5 | – | – | – | – | – | – | 180 | 160 | 145 | – | – | – | 330 | 300 | 275 | 310 | 275 | 255 | – | – | – | |
| 6 | – | – | – | – | – | – | 160 | 120 | 95 | – | – | – | 230 | 200 | 175 | 190 | 165 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | 205 | 180 | 165 | – | – | – | 270 | 240 | 205 | 250 | 220 | 190 | – | – | – |
| 2 | – | – | – | – | – | – | 185 | 160 | 130 | – | – | – | 245 | 215 | 190 | 225 | 195 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 140 | 120 | 95 | – | – | – | 195 | 175 | 150 | 175 | 160 | 140 | – | – | – | |
| K | 1 | – | – | – | 325 | 295 | 260 | – | – | – | 505 | 460 | 410 | 435 | 390 | 350 | 355 | 320 | 285 | 965 | 880 | 780 |
| 2 | – | – | – | 255 | 225 | 215 | – | – | – | 400 | 355 | 330 | 345 | 310 | 280 | 280 | 255 | 230 | 765 | 685 | 635 | |
| 3 | – | – | – | 215 | 190 | 170 | – | – | – | 335 | 300 | 275 | 290 | 255 | 240 | 235 | 210 | 195 | 645 | 570 | 525 | |
| N | 1–2 | 1460 | 1300 | 1195 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1300 | 1195 | 1100 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 55 | 45 | 30 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 75 | 55 | 35 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Materiálová skupina | KC410M | KC520M | KC725M | KCK15 | KCPM20 | KCPK30 | KY3500 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 1030 | 900 | 840 | – | – | – | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 | – | – | – |
| 2 | – | – | – | – | – | – | 860 | 760 | 640 | – | – | – | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | – | – | – | |
| 3 | – | – | – | – | – | – | 790 | 670 | 550 | – | – | – | 1210 | 1090 | 1000 | 1000 | 900 | 820 | – | – | – | |
| 4 | – | – | – | – | – | – | 710 | 590 | 470 | – | – | – | 910 | 840 | 760 | 740 | 690 | 620 | – | – | – | |
| 5 | – | – | – | – | – | – | 590 | 530 | 470 | – | – | – | 1090 | 980 | 900 | 1020 | 910 | 830 | – | – | – | |
| 6 | – | – | – | – | – | – | 520 | 400 | 310 | – | – | – | 760 | 660 | 570 | 620 | 540 | - | – | – | – | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | – | – | – | 880 | 790 | 680 | 820 | 720 | 620 | – | – | – |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | – | – | – | 800 | 700 | 620 | 730 | 640 | 550 | – | – | – | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | – | – | – | 640 | 570 | 490 | 570 | 520 | 460 | – | – | – | |
| K | 1 | – | – | – | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1420 | 1280 | 1150 | 1160 | 1050 | 940 | 3170 | 2880 | 2560 |
| 2 | – | – | – | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 1130 | 1010 | 920 | 920 | 830 | 760 | 2510 | 2240 | 2090 | |
| 3 | – | – | – | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 950 | 840 | 780 | 770 | 690 | 640 | 2110 | 1870 | 1720 | |
| N | 1–2 | 4790 | 4260 | 3920 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 4260 | 3920 | 3600 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 180 | 140 | 100 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 240 | 180 | 120 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?