Drilling: Stacked Plates
Corner Style: Corner Chamfer
Drilling
Tool Dimensions: 2flute/2margin/coolant
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6782179 |
| ISO katalogové ID | B225A10400HPX |
| ANSI katalogové ID | B225A10400HPX |
| Grade | KCP15B |
| [D1] Drill Diameter M | 10.4 mm |
| [D1] Drill Diameter M | .4094 in |
| [L] Overall Length | 118 mm |
| [L] Overall Length | 4.645 in |
| [L3] Flute Length | 71 mm |
| [L3] Flute Length | 2.795 in |
| [L4] Maximum Drilling Depth | 56 mm |
| [L4] Maximum Drilling Depth | 2.204 in |
| [L5] Drill Point Length | 2.2 mm |
| [L5] Drill Point Length | .0866 in |
| [LS] Shank Length | 45 mm |
| [LS] Shank Length | 1.771 in |
| [D] Adapter / Shank / Bore Diameter | 12 mm |
| [D] Adapter / Shank / Bore Diameter | .4724 in |
Drilling: Stacked PlatesCorner Style: Corner ChamferDrillingTool Dimensions: 2flute/2margin/coolantDrilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| 1–3 | 0,002/0,012 | 0,000/-0,006 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 |
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| 0,0394-0,1181 | 0,0001/0,0005 | 0,0000/-0,0002 |
| 0,0002/0,0006 | 0,0000/-0,0003 | |
| 0,0002/0,0008 | 0,0000/-0,0004 | |
| 0,0003/0,0010 | 0,0000/-0,0004 | |
| 0,0003/0,0011 | 0,0000/-0,0005 |
| Malzeme grubu |  |  | |||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Malzeme grubu | | | |||||||||||
| Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 0,125 | 3/16 0,188 | 1/4 0,250 | 5/16 0,313 | 3/8 0,375 | 1/2 0,500 | 5/8 0,625 | 3/4 0,750 | |||
| P | 0 | 460 | 790 | 950 | IPR | 0,005–0,009 | 0,005–0,010 | 0,006–0,012 | 0,007–0,013 | 0,008–0,015 | 0,008–0,017 | 0,010–0,020 | 0,011–0,023 |
| 1 | 430 | 790 | 950 | IPR | 0,006–0,012 | 0,006–0,013 | 0,007–0,015 | 0,008–0,018 | 0,009–0,020 | 0,009–0,022 | 0,011–0,027 | 0,013–0,032 | |
| 2 | 620 | 750 | 890 | IPR | 0,005–0,012 | 0,006–0,013 | 0,007–0,015 | 0,008–0,017 | 0,009–0,019 | 0,011–0,022 | 0,013–0,026 | 0,015–0,030 | |
| 3 | 430 | 520 | 620 | IPR | 0,006–0,012 | 0,007–0,013 | 0,008–0,015 | 0,009–0,017 | 0,010–0,020 | 0,012–0,022 | 0,014–0,027 | 0,017–0,031 | |
| 4 | 360 | 490 | 560 | IPR | 0,005–0,010 | 0,006–0,011 | 0,007–0,013 | 0,009–0,015 | 0,010–0,017 | 0,012–0,019 | 0,015–0,023 | 0,017–0,027 | |
| 5 | 230 | 300 | 360 | IPR | 0,004–0,008 | 0,005–0,009 | 0,006–0,011 | 0,007–0,013 | 0,008–0,015 | 0,009–0,017 | 0,012–0,020 | 0,014–0,024 | |
| 6 | 200 | 260 | 330 | IPR | 0,004–0,008 | 0,005–0,009 | 0,006–0,011 | 0,007–0,013 | 0,008–0,015 | 0,009–0,017 | 0,012–0,020 | 0,014–0,024 | |
| | ||||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Malzeme grubu |  |  | |||||||||||
| Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 0,125 | 3/16 0,188 | 1/4 0,250 | 5/16 0,313 | 3/8 0,375 | 1/2 0,500 | 5/8 0,625 | 3/4 0,750 | |||
| P | 0 | 230 | 430 | 490 | IPR | 0,006–0,011 | 0,006–0,012 | 0,007–0,014 | 0,009–0,016 | 0,009–0,018 | 0,010–0,020 | 0,011–0,023 | 0,013–0,027 |
| 1 | 230 | 430 | 490 | IPR | 0,007–0,014 | 0,007–0,015 | 0,008–0,018 | 0,009–0,021 | 0,010–0,024 | 0,011–0,027 | 0,013–0,032 | 0,015–0,038 | |
| 2 | 330 | 390 | 460 | IPR | 0,006–0,014 | 0,007–0,015 | 0,008–0,018 | 0,010–0,020 | 0,011–0,023 | 0,013–0,025 | 0,015–0,031 | 0,018–0,036 | |
| 3 | 230 | 300 | 330 | IPR | 0,007–0,014 | 0,008–0,015 | 0,009–0,018 | 0,011–0,021 | 0,012–0,023 | 0,014–0,026 | 0,017–0,031 | 0,020–0,037 | |
| 4 | 200 | 260 | 300 | IPR | 0,006–0,012 | 0,007–0,013 | 0,009–0,015 | 0,010–0,018 | 0,012–0,020 | 0,014–0,022 | 0,017–0,027 | 0,020–0,032 | |
| 5 | 130 | 160 | 200 | IPR | 0,005–0,010 | 0,006–0,011 | 0,007–0,013 | 0,009–0,015 | 0,010–0,017 | 0,011–0,020 | 0,014–0,024 | 0,016–0,028 | |
| 6 | 100 | 130 | 160 | IPR | 0,005–0,010 | 0,006–0,011 | 0,007–0,013 | 0,009–0,015 | 0,010–0,017 | 0,011–0,020 | 0,014–0,024 | 0,016–0,028 | |
| Malzeme grubu | | | |||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| | ||||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?