Produkt podobný k:
KOR5™ DS • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch
KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
Objednací číslo6769785
ISO katalogové IDKOR5RA1000R300HAR060ANSI katalogové IDKOR5RA1000R300HAR060
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
- H Hardened Materials
- Trochoidal Milling
- Ramping: 5°
- Side Milling/Shoulder Milling: Square End
- Tool Dimensions: Flute Configuration: 5
- Shank - Cylindrical Plain
- Helix Angle: 40°
- Corner Style: Corner Radius
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Objednací číslo | 6769785 |
ISO katalogové ID | KOR5RA1000R300HAR060 |
ANSI katalogové ID | KOR5RA1000R300HAR060 |
Grade | KC643M |
Adapter Style Machine Side | Straight-Cylindrical |
[Re] Corner Radius | 1.524 mm |
[Re] Corner Radius | .06 in |
[Z] Number of Flutes | 5 |
[D1] Effective Cutting Diameter | 25.4 mm |
[D1] Effective Cutting Diameter | 1 in |
[D] Adapter / Shank / Bore Diameter | 25.4 mm |
[D] Adapter / Shank / Bore Diameter | 1 in |
[AP1MAX] 1st Maximum Cutting Depth | 76.2 mm |
[AP1MAX] 1st Maximum Cutting Depth | 3 in |
[L] Overall Length | 152.4 mm |
[L] Overall Length | 6 in |
Materiály obrobků
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
- Hardened Materials
Použití
- Trochoidal Milling
- Ramping: 5°
- Side Milling/Shoulder Milling: Square End
- Tool Dimensions: Flute Configuration: 5
- Shank - Cylindrical Plain
- Helix Angle: 40°
- Corner Style: Corner Radius
Karbidy
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
Vlastnosti a výhody
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip deformers for ideal chip evacuation at high surface quality.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
TechnicalInfo
KOR5™ DS • 5 Flutes • 3 x D • Adjustment factor table for feed calculation • Inch
Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | 8.00% | 10.00% | |
Speed factor | Kv | 2.15 | 2.11 | 2.07 | 1.48 | 1.11 | 1.07 | 1.04 | 1.00 |
Feed factor | KFz | 1.65 | 1.53 | 1.47 | 1.41 | 1.35 | 1.29 | 1.18 | 1.00 |
Řezné podmínky
KOR5™ DS • 5 Flutes • 3 x D • Application Data • Inch
Materiálová skupina | |||||||||||||
Boční frézování (A) | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||
A | KC643M | Průměr D1 | |||||||||||
Řezná rychlost | frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||
ap | ae | Min | Max | dec. | .2500 | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
P | 0 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
1 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
2 | 3 x D | 0.1 x D | 460 | – | 1370 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
3 | 3 x D | 0.1 x D | 400 | – | 1150 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
4 | 3 x D | 0.1 x D | 300 | – | 1080 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 | |
5 | 3 x D | 0.1 x D | 200 | – | 720 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
6 | 3 x D | 0.1 x D | 170 | – | 540 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
M | 1 | 3 x D | 0.1 x D | 300 | – | 830 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
2 | 3 x D | 0.1 x D | 200 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
3 | 3 x D | 0.1 x D | 200 | – | 510 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
K | 1 | 3 x D | 0.1 x D | 400 | – | 1080 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
2 | 3 x D | 0.1 x D | 370 | – | 1010 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
3 | 3 x D | 0.1 x D | 370 | – | 940 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
S | 1 | 3 x D | 0.1 x D | 170 | – | 650 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
2 | 3 x D | 0.1 x D | 80 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
3 | 3 x D | 0.1 x D | 80 | – | 290 | IPT | .0010 | .0015 | .0018 | .0022 | .0025 | .0029 | |
4 | 3 x D | 0.1 x D | 170 | – | 430 | IPT | .0013 | .0020 | .0026 | .0030 | .0034 | .0040 | |
H | 1 | 3 x D | 0.1 x D | 270 | – | 1010 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 |
2 | 3 x D | 0.1 x D | 230 | – | 870 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
KOR™5DS
KOR™ Series End Mills: Solid End Mills for Dynamic Milling