5720 Series • Two Cutting Edges • Ap1 max 16mm

The 5720 Ap1 16mm series of shoulder mills offer high metal removal rates for machining aluminum. These cutters provide maximum stability in high-speed applications and allow each body to hold inserts with different radii without losing any gauge height of the cutter length. The pockets of the cutters are reinforced to allow for heavy feeds, safe ramping, and provide more line contact when utilizing larger radius inserts for more stability. Additionally, the profile and pocketing cutters feature through-tool coolant allowing better chip evacuation. The 5720 series of cutters and inserts are ideal for machining thin-walled components. Cylindrical shank designs are balanced, but the shell mill and modular head cutters are not balanced. It is recommended to balance the shell mill and adapter as an assembly for high-speed machining.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (46)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
    • N Non-Ferrous Materials (46)
      • N1
        Wrought Aluminum (46)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(46)
    Applications
    Applications
    • Face MillingFace Milling (29)
    • PocketPocket (4)
    • Pocket HelicalPocket Helical (3)
    • Pocket MillingPocket Milling (29)
    • Profile MillingProfile Milling (29)
    • RampingRamping (29)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (29)
    • Shoulder MillingShoulder Milling (29)
    • Shoulder RoughingShoulder Roughing (29)
    • Shoulder Square EndShoulder Square End (29)
    • Slot MillingSlot Milling (25)
    • Slot SideSlot Side (25)
    • Slot Square EndSlot Square End (29)
    • Slot TSlot T (25)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.25 in(3)
    • 1.26 in(5)
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.969 in(3)
    • 2.0 in(3)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(3)
    • 3.15 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(5)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(3)
    • 50.801 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(3)
    • 80.0 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.401 mm(1)
    • 38.1 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.0 in(1)
    • 1.5 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 16.0 mm(31)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.63 in(31)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.575 in(3)
    • 1.772 in(5)
    • 1.967 in(1)
    • 1.969 in(11)
    • 2.0 in(2)
    • 2.75 in(1)
    • 2.953 in(7)
    • 3.0 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 49.95 mm(1)
    • 50.0 mm(11)
    • 50.801 mm(2)
    • 69.851 mm(1)
    • 75.0 mm(7)
    • 76.2 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (31)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (16)
    • HSK (4)
    • Screw-On Connection (6)
    • Straight-Cylindrical (5)
    Number of Flutes
    Number of Flutes
    • 2 (8)
    • 3 (11)
    • 4 (8)
    • 5 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(3)
    • 1.772 in(5)
    • 1.969 in(6)
    • 2.0 in(2)
    • 2.835 in(2)
    • 2.872 in(1)
    • 2.874 in(3)
    • 5.03 in(1)
    • 5.157 in(1)
    • 5.232 in(1)
    • 5.236 in(3)
    • 5.28 in(1)
    • 5.315 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 50.0 mm(6)
    • 50.801 mm(2)
    • 72.0 mm(2)
    • 72.95 mm(1)
    • 73.0 mm(3)
    • 127.75 mm(1)
    • 131.0 mm(1)
    • 132.9 mm(1)
    • 133.0 mm(3)
    • 134.1 mm(1)
    • 135.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.012 in(32)
    • 0.016 in(32)
    • 0.031 in(32)
    • 0.049 in(32)
    • 0.066 in(32)
    • 0.083 in(32)
    • 0.103 in(33)
    • 0.122 in(33)
    • 0.13 in(32)
    • 0.161 in(33)
    • 0.206 in(32)
    • 0.244 in(32)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.301 mm(32)
    • 0.4 mm(32)
    • 0.8 mm(32)
    • 1.25 mm(32)
    • 1.675 mm(32)
    • 2.1 mm(32)
    • 2.6 mm(33)
    • 3.1 mm(33)
    • 3.301 mm(32)
    • 4.101 mm(33)
    • 5.2 mm(32)
    • 6.2 mm(32)
    Corner Radius MintoCorner Radius Max
    Application
    Hand Of Tool
    Hand Of Tool
    • R (31)
    Wiper Insert
    Wiper Insert
    • N (15)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 4.4 (2)
    • 4.6 (3)
    • 5.8 (2)
    • 5.9 (2)
    • 7.5 (2)
    • 7.6 (1)
    • 7.8 (4)
    • 7.9 (1)
    • 8.1 (1)
    • 11.4 (5)
    • 11.5 (3)
    • 14.5 (3)
    • 14.7 (2)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.961 in(1)
    • 1.137 in(1)
    • 1.176 in(1)
    • 1.18 in(1)
    • 1.22 in(1)
    • 1.43 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 24.401 mm(1)
    • 28.875 mm(1)
    • 29.875 mm(1)
    • 29.975 mm(1)
    • 31.0 mm(1)
    • 36.325 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • Z-PARALLELOGRAM 89.27 (15)
    Cutting Edge Length
    Cutting Edge Length
    • 16.25 mm(2)
    • 16.375 mm(7)
    • 16.401 mm(5)
    • 16.45 mm(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.64 in(2)
    • 0.645 in(7)
    • 0.646 in(5)
    • 0.648 in(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 721 (15)
    Cutting Tool Material
    Cutting Tool Material
    • H W (15)
    Tolerance Class
    Tolerance Class
    • E (15)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (5)
    • SCREW-ON (6)
    • SHELL MILL (16)
    • TAPER SHANK (4)
    System Size
    System Size
    • HSK63A (4)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 19.1 mm(1)
    • 21.0 mm(2)
    • 22.0 mm(4)
    • 25.0 mm(1)
    • 25.401 mm(6)
    • 27.0 mm(2)
    • 29.0 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 63.0 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(1)
    • 0.75 in(2)
    • 0.752 in(1)
    • 0.828 in(2)
    • 0.866 in(4)
    • 0.984 in(1)
    • 1.0 in(6)
    • 1.063 in(2)
    • 1.143 in(4)
    • 1.25 in(1)
    • 1.26 in(2)
    • 2.48 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?