KM63XMZ™ Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (21)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(21)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(21)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(21)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(21)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(21)
- M Stainless Steel (21)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(21)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(21)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(21)
- K Cast Iron (21)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
- N Non-Ferrous Materials (21)
- N1Wrought Aluminum (21)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(21)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (21)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (21)
- N6Carbon, Graphite Composites, CFRP (21)
- N7MMC's (21)
- S High-Temp Alloys (21)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(21)
- H Hardened Materials (21)
- H1Hardened Materials 44-48 HRC(21)
- H2Hardened Materials 48-55 HRC(21)
- H3Hardened Materials 56-60 HRC(21)
- H4Hardened Materials >60 HRC(21)
- C CFRP Materials (21)
- C1CFRP, CFRP / CFRP (21)
- C2CFRP / Aluminium CFRP / Non-Ferrous (21)
Applications
Applications
Cut-Off (3)
Deep Grooving (3)
Facing (16)
Grooving (3)
Multiple Direction Cutting (20)
Profiling (24)
TRN Boring (16)
Turning (21)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (21)
- Lightly Interrupted Cut (21)
- Smooth Cut (21)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 48.0 (6)
- 49.783 (1)
- 50.0 (2)
- 93.0 (6)
- 95.0 (6)
to
Connection Style
Connection Style
- KM (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (19)
- 2.0 (19)
- 3.0 (2)
- 4.0 (18)
- 6.0 (2)
- 8.0 (11)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(12)
- 4.529 in(9)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(12)
- 115.0 mm(9)
to
Corner Radius
Corner Radius
- 0.002 in(1)
- 0.004 in(19)
- 0.008 in(16)
- 0.014 in(3)
- 0.016 in(21)
- 0.024 in(2)
- 0.031 in(21)
- 0.047 in(21)
- 0.062 in(5)
- 0.063 in(16)
- 0.094 in(6)
- 0.095 in(2)
- 0.126 in(2)
to
Corner Radius
Corner Radius
- 0.05 mm(1)
- 0.1 mm(19)
- 0.2 mm(16)
- 0.351 mm(3)
- 0.4 mm(21)
- 0.601 mm(2)
- 0.8 mm(21)
- 1.201 mm(21)
- 1.576 mm(5)
- 1.6 mm(16)
- 2.375 mm(6)
- 2.401 mm(2)
- 3.2 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (18)
- 241 (5)
- CL4 (8)
- CM2 (18)
- CM3 (8)
- CM4 (7)
- CPX (14)
- CW2 (8)
- CW2015 (18)
- CW5025 (20)
- GX (5)
- HK1500 (11)
- HT2 (9)
- HTX (6)
- K060 (9)
- K090 (18)
- K1 (5)
- K10M (21)
- K10P (20)
- K10U (19)
- K15U (19)
- K20K (20)
- K21 (5)
- K25M (21)
- K25P (19)
- K313 (21)
- K35P (11)
- K420 (15)
- K45 (13)
- K68 (19)
- KB1340 (5)
- KB1345 (9)
- KB1610 (16)
- KB1625 (14)
- KB1630 (13)
- KB5610 (16)
- KB5625 (14)
- KB5630 (14)
- KB9610 (19)
- KB9640 (7)
- KBH10 (19)
- KBH10B (16)
- KBH20 (19)
- KBH20B (16)
- KBK35 (5)
- KC210 (12)
- KC250 (11)
- KC5010 (21)
- KC5020P (1)
- KC5025 (21)
- KC5410 (21)
- KC5510 (20)
- KC5525 (14)
- KC710 (5)
- KC720 (18)
- KC722 (5)
- KC730 (18)
- KC7310 (20)
- KC732 (18)
- KC8050 (21)
- KC810 (21)
- KC850 (21)
- KC9010 (20)
- KC9025 (21)
- KC910 (21)
- KC9105 (21)
- KC9110 (21)
- KC9120 (20)
- KC9125 (21)
- KC9140 (20)
- KC9145 (20)
- KC9210 (3)
- KC9215 (20)
- KC9225 (21)
- KC9240 (21)
- KC9240NEW (21)
- KC9245 (20)
- KC9315 (21)
- KC9320 (21)
- KC9325 (20)
- KC935 (21)
- KC950 (21)
- KC990 (20)
- KCD25 (5)
- KCK05 (21)
- KCK05B (21)
- KCK15 (21)
- KCK15B (21)
- KCK20 (21)
- KCK20B (21)
- KCM15 (21)
- KCM15B (21)
- KCM25 (21)
- KCM25B (21)
- KCM35 (21)
- KCM35B (12)
- KCP05 (21)
- KCP05B (19)
- KCP10 (21)
- KCP10B (21)
- KCP15 (1)
- KCP25 (21)
- KCP25B (21)
- KCP25C (21)
- KCP30 (21)
- KCP30B (16)
- KCP40 (16)
- KCP40B (21)
- KCPK05 (20)
- KCS10 (6)
- KCS10B (21)
- KCU10 (21)
- KCU10B (21)
- KCU25 (21)
- KCU25B (21)
- KD050 (14)
- KD081 (14)
- KD100 (14)
- KD120 (13)
- KD1400 (16)
- KD1405 (14)
- KD1425 (16)
- KM1 (5)
- KMF (5)
- KS15 (5)
- KT1120 (8)
- KT125 (16)
- KT150 (13)
- KT175 (17)
- KT315 (19)
- KT325 (9)
- KT5020 (4)
- KTP10 (19)
- KTP25S (19)
- KU10 (1)
- KU10T (19)
- KU30T (21)
- KY1310 (13)
- KY1320 (20)
- KY1540 (9)
- KY1615 (18)
- KY2000 (11)
- KY2100 (9)
- KY3000 (18)
- KY3400 (13)
- KY3500 (20)
- KY4000 (11)
- KY4300 (11)
- KY4400 (20)
- KYHK15B (20)
- KYK10 (11)
- KYK25 (13)
- KYK35 (20)
- KYS25 (9)
- KYS30 (11)
- NL200 (8)
- NL250 (20)
- NL300 (10)
- NL400 (9)
- NL920 (14)
- P25 (5)
- PB100 (5)
- PB170 (5)
- PB250 (5)
- PB300 (5)
- PS5 (8)
- SP0819 (12)
- SP3019 (9)
- SP4019 (13)
- SP4036 (4)
- SP4093 (4)
- THM (6)
- THM-X (8)
- THMF-X (5)
- TN10P (21)
- TN10U (19)
- TN15M (21)
- TN15U (19)
- TN2000 (11)
- TN20K (21)
- TN20P (21)
- TN30M (21)
- TN30P (16)
- TN4000 (11)
- TN5015 (14)
- TN5020 (13)
- TN5105 (14)
- TN5120 (17)
- TN6010 (16)
- TN6025 (10)
- TN7005 (15)
- TN7010 (17)
- TN7015 (17)
- TN7025 (17)
- TN7035 (13)
- TN7105 (11)
- TN7110 (17)
- TN7115 (17)
- TN7125 (13)
- TN7135 (13)
- TN8025 (16)
- TTI15 (9)
- TTR (5)
- TTS (8)
- TTX (9)
- WBH10C (19)
- WBH10P (14)
- WBH10U (16)
- WBH20P (18)
- WBH25P (14)
- WBH25U (13)
- WBH30P (14)
- WBK40U (5)
- WBK45U (12)
- WDN00U (9)
- WDN25U (16)
- WK05CT (20)
- WK15CT (11)
- WK20CT (21)
- WM15CT (21)
- WM25CT (21)
- WM35CT (20)
- WP05CT (7)
- WP15CT (21)
- WP25CT (21)
- WP35CT (21)
- WS10PT (20)
- WS25PT (20)
- WU10HT (21)
- WU10PT (15)
- WU25PT (15)
- X00511 (5)
- X00580 (5)
- X00581 (5)
- X00582 (5)
- X00583 (5)
- X00584 (5)
- X00585 (5)
- X00586 (5)
- X00591 (5)
- X00592 (5)
- X00593 (5)
- X00594 (5)
- X00596 (5)
- X00597 (5)
- X00599 (5)
Hand Of Tool
Hand Of Tool
- L (2)
- R (3)
Wiper Insert
Wiper Insert
- N (21)
- Y (7)
F Dimension
F Dimension
- 43.0 mm(5)
to
F Dimension
F Dimension
- 1.693 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 86.0 mm(7)
- 100.0 mm(9)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.386 in(7)
- 3.938 in(9)
to
Cutting Direction
Cutting Direction
- S (5)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (5)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(7)
- 4.529 in(9)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(7)
- 115.0 mm(9)
to
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (9)
- CUTOFF SUPPORT BLADE (4)
Clamp Style
Clamp Style
- M (17)
- P (3)
- S (1)
Front End Type
Front End Type
- MCS - Modular Cartridge System (9)
- PMK - Prismatic Adapter Kenna (4)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (7)
- D-DIAMOND/RHOMBIC 55 (7)
- V-DIAMOND/RHOMBIC 35 (5)
- W-TRIGON 80 (2)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (9)
- PMK02 Cutoff Sup Bld A1-A3 (4)
Gage Length
Gage Length
- 1.85 in(2)
- 2.303 in(3)
- 2.5 in(4)
- 4.118 in(2)
- 4.874 in(2)
Gage Length
Gage Length
- 47 mm(2)
- 58.5 mm(3)
- 63.5 mm(4)
- 104.601 mm(2)
- 123.801 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (19)
- B L (19)
- C A (20)
- C N (20)
- D P (19)
- H T (19)
- H W (21)
Back-End
Connection Type
Connection Type
- TAPER SHANK (5)
System Size
System Size
- KM63XMZ (18)
No filters matching ""
