DeVibrator and Tunable Boring
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (4)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (4)
- N1Wrought Aluminum (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
- N3High-Silicon Aluminum Alloys Si >12.2%(4)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (4)
- N6Carbon, Graphite Composites, CFRP (4)
- N7MMC's (4)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
- H2Hardened Materials 48-55 HRC(4)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
- C CFRP Materials (4)
- C1CFRP, CFRP / CFRP (4)
- C2CFRP / Aluminium CFRP / Non-Ferrous (4)
Applications
Applications
Multiple Direction Cutting (4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (4)
- Lightly Interrupted Cut (4)
- Smooth Cut (4)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 95.0 (4)
to
Connection Style
Connection Style
- Boring Bar Shank (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (4)
- 4.0 (4)
to
Over All Length [L]
Over All Length [L]
- 10.0 in(2)
- 12.0 in(2)
to
Over All Length [L]
Over All Length [L]
- 254.0 mm(2)
- 304.8 mm(2)
to
Corner Radius
Corner Radius
- 0.004 in(4)
- 0.008 in(4)
- 0.016 in(4)
- 0.031 in(4)
- 0.047 in(4)
to
Corner Radius
Corner Radius
- 0.1 mm(4)
- 0.2 mm(4)
- 0.4 mm(4)
- 0.8 mm(4)
- 1.201 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (4)
- K68 (4)
- KB1610 (4)
- KB1630 (4)
- KB5610 (4)
- KB5630 (4)
- KB9610 (4)
- KC5010 (4)
- KC5025 (4)
- KC5410 (4)
- KC720 (4)
- KC730 (4)
- KC732 (4)
- KC8050 (4)
- KC810 (4)
- KC850 (4)
- KC9010 (4)
- KC9025 (4)
- KC910 (4)
- KC9105 (4)
- KC9110 (4)
- KC9120 (4)
- KC9125 (4)
- KC9225 (4)
- KC9240 (4)
- KC9240NEW (4)
- KC9315 (4)
- KC9320 (4)
- KC9325 (4)
- KC935 (4)
- KC950 (4)
- KC990 (4)
- KCD25 (4)
- KCK05 (4)
- KCK15 (4)
- KCK15B (4)
- KCK20 (4)
- KCK20B (4)
- KCM15 (4)
- KCM15B (4)
- KCM25 (4)
- KCM25B (4)
- KCM35 (4)
- KCP05 (4)
- KCP10 (4)
- KCP10B (4)
- KCP25 (4)
- KCP25B (4)
- KCP25C (4)
- KCP30 (4)
- KCS10 (4)
- KCS10B (4)
- KCU10 (4)
- KCU10B (4)
- KCU25 (4)
- KCU25B (4)
- KD050 (4)
- KD100 (4)
- KD105 (4)
- KD120 (4)
- KD1400 (4)
- KD1405 (4)
- KD1425 (4)
- KT175 (4)
- KT315 (4)
- KTP10 (4)
- KU10 (4)
- KU10T (4)
- KU30T (4)
Hand Of Tool
Hand Of Tool
- L (1)
- R (3)
Wiper Insert
Wiper Insert
- N (4)
- Y (4)
F Dimension
F Dimension
- 10.3 mm(1)
- 12.701 mm(1)
- 16.25 mm(2)
to
F Dimension
F Dimension
- 0.406 in(1)
- 0.5 in(1)
- 0.64 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 19.55 mm(1)
- 23.625 mm(1)
- 30.475 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.77 in(1)
- 0.93 in(1)
- 1.2 in(2)
to
Cutting Direction
Cutting Direction
- B (4)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (2)
Maximum Bore Depth
Maximum Bore Depth
- 2.5 in(1)
- 3.0 in(1)
- 4.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 63.5 mm(1)
- 76.2 mm(1)
- 101.601 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (4)
Front-End
Clamp Style
Clamp Style
- S (4)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (4)
Gage Length
Gage Length
- 10 in(2)
- 11 in(2)
- 12 in(2)
- 14 in(2)
- 9 in(2)
- 13 in(1)
- 16 in(1)
- 17 in(1)
- 18 in(1)
- 20 in(1)
- 24 in(1)
- 8.268 in(1)
- 10.236 in(1)
- 12.205 in(2)
- 14.173 in(1)
- 16.142 in(1)
Gage Length
Gage Length
- 254 mm(2)
- 310 mm(2)
- 210 mm(1)
- 260 mm(1)
- 360 mm(1)
- 410 mm(1)
- 508 mm(1)
- 228.601 mm(2)
- 279.401 mm(2)
- 304.8 mm(2)
- 330.201 mm(1)
- 355.6 mm(2)
- 406.401 mm(1)
- 431.8 mm(1)
- 457.201 mm(1)
- 609.6 mm(1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (4)
- D P (4)
- H T (4)
- H W (4)
Back-End
Connection Type
Connection Type
- BORING BAR (4)
Back-End Diameter
Back-End Diameter
- 15.875 mm(1)
- 19.05 mm(1)
- 25.401 mm(4)
- 31.75 mm(3)
- 32.0 mm(2)
- 38.1 mm(3)
- 40.0 mm(2)
- 44.45 mm(2)
- 50.0 mm(2)
- 50.801 mm(2)
- 63.5 mm(3)
- 76.2 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.625 in(1)
- 0.75 in(1)
- 1.0 in(4)
- 1.25 in(3)
- 1.26 in(2)
- 1.5 in(3)
- 1.575 in(2)
- 1.75 in(2)
- 1.969 in(2)
- 2.0 in(2)
- 2.5 in(3)
- 3.0 in(1)
to
Shank Height
Shank Height
- 0.301 in(1)
- 0.727 in(1)
- 0.977 in(2)
to
Shank Height
Shank Height
- 7.65 mm(1)
- 18.475 mm(1)
- 24.826 mm(2)
to
No filters matching ""