Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Convex
Shank - Cylindrical Whistle Notch with Drive and Flange
Through Coolant: Radial: Indexable Drilling
Drilling: Blind
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 5691862 |
| ISO Catalog ID | DFSP250R3WD32M |
| ANSI Catalog ID | DFSP250R3WD32M |
| [D] Adapter / Shank / Bore Diameter | 32 mm |
| [D] Adapter / Shank / Bore Diameter | 1.259 in |
| [D1] Drill Diameter M | 25 mm |
| [D1] Drill Diameter M | .9843 in |
| [D1MAX] Drill Diameter Maximum | 26 mm |
| [D1MAX] Drill Diameter Maximum | 1.023 in |
| [L1] Insert Gage Length | 108 mm |
| [L1] Insert Gage Length | 4.252 in |
| [L4] Maximum Drilling Depth | 75 mm |
| [L4] Maximum Drilling Depth | 2.952 in |
| [L5] Drill Point Length | 0.69 mm |
| [L5] Drill Point Length | .0272 in |
| [LS] Shank Length | 58 mm |
| [LS] Shank Length | 2.283 in |
| [CS] Coolant Supply Size | R1/4 |
| Gage Insert | SPGX0703. |
| Gage Insert 2 | DFT05T3. |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: X-OffsetDrilling: ConvexShank - Cylindrical Whistle Notch with Drive and FlangeThrough Coolant: Radial: Indexable DrillingDrilling: BlindChain DrillingDrilling: Cross-Hole DrillingDrilling: Half-Cylindrical DrillingDrilling: Corner Drilling 45°Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
| D | LS | CS |
| 20 | 45 | — |
| 32 | 58 | R 1/4 BSP * |
| 40 | 68 | R 1/4 BSP |
| 50 | 68 | R 1/4 BSP |
| D | LS |
| 20 | 50 |
| 25 | 56 |
| 32 | 60 |
| 40 | 70 |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 14–17,49 | SPGX06 DFT03 17,5–21,99 | SPGX07 DFT05 22,00–25,99 | SPGX09 DFT05 26,00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | ||||||
| P | 1 | S | O | MD | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | MD | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | MD | KCPK10 | 260 | 285 | 320 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 180 | 195 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 110 | 120 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | FP | KCPK10 | 220 | 250 | 300 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 150 | 180 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 90 | 110 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | MD | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | Metric | ||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 14,00-17,49 | SPGX06 DFT03 17,50-21,99 | SPGX07 DFT05 22.00-25,99 | SPGX09 DFT05 26.00-32,99 | SPGX12 DFT06/..07 33,00-43,99 | SPGX15 DFT07/..09 44,00-55,00 | |
| P | 1 | S | O | MD | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 |
| 1 | S | I | MD | KC7140 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 1 | U | O | FP | KCU25 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 1 | U | I | MD | KC7140 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 1 | I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 1 | I | I | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | S | O | MD | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 2 | S | I | MD | KC7140 | 310 | 325 | 360 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 2 | U | O | FP | KCU25 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | U | I | MD | KC7140 | 200 | 215 | 230 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | I | I | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | S | O | MD | KCPK10 | 260 | 285 | 320 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 3 | S | I | MD | KC7140 | 260 | 285 | 320 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 3 | U | O | FP | KCU25 | 180 | 195 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | U | I | MD | KC7140 | 180 | 195 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | I | O | HP | KCU40 | 110 | 120 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | I | I | MD | KC7140 | 110 | 120 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | S | O | FP | KCPK10 | 220 | 250 | 300 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 4 | S | I | MD | KC7140 | 220 | 250 | 300 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 4 | U | O | HP | KCU25 | 150 | 180 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | U | I | MD | KC7140 | 150 | 180 | 220 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | I | O | HP | KCU40 | 90 | 110 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | I | I | MD | KC7140 | 90 | 110 | 140 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 5 | S | I | MD | KC7140 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 5 | U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | U | I | MD | KC7140 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | I | I | MD | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 6 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 6 | S | I | MD | KC7140 | 180 | 200 | 220 | mm/r | 0,06–0,11 | 0,08–0,14 | 0,10–0,18 | 0,14–0,25 | 0,16–0,30 | 0,18–0,30 | |
| 6 | U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 6 | U | I | MD | KC7140 | 120 | 135 | 150 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 6 | I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 6 | I | I | MD | KC7140 | 70 | 85 | 100 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 14–17,49 | SPGX06 DFT03 17,5–21,99 | SPGX07 DFT05 22,00–25,99 | SPGX09 DFT05 26,00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | ||||||
| M | 1 | S | O | FP | KCU25 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU40 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | FP | KCU25 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU40 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU25 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 80 | 110 | 140 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
| I | MD | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 14,00–17,49 | SPGX06 DFT03 17,50–21,99 | SPGX07 DFT05 22.00–25,99 | SPGX09 DFT05 26.00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | |
| M | 1 | S | O | FP | KCU25 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 |
| 1 | S | I | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 1 | U | O | MD | KCU40 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 1 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 1 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| 1 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| 2 | S | O | FP | KCU25 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | S | I | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | U | O | MD | KCU40 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 2 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 2 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| 2 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| 3 | S | O | HP | KCU25 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | S | I | HP | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | U | O | HP | KCU40 | 80 | 110 | 140 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 3 | U | I | HP | KC7140 | 80 | 110 | 140 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,20 | |
| 3 | I | O | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| 3 | I | I | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 14–17,49 | SPGX06 DFT03 17,5–21,99 | SPGX07 DFT05 22,00–25,99 | SPGX09 DFT05 26,00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | ||||||
| K | 1 | S | O | FP | KCPK10 | 200 | 240 | 300 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 |
| I | HP | KCU40 | |||||||||||||
| U | O | FP | KCU25 | 120 | 155 | 200 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | FP | KC7140 | 80 | 100 | 125 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | FP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| N | 1 | S | O | LP | KCU40 | 150 | 190 | 230 | mm/r | 0,06-0,08 | 0,06-0,10 | 0,08-0,12 | 0,10-0,16 | 0,12-0,021 | 0,14-0,024 |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05-0,07 | 0,06-0,08 | 0,07-0,10 | 0,05-0,10 | 0,06-0,013 | 0,08-0,014 | ||
| I | DS | KCU40 | |||||||||||||
| 2 | S | O | LP | KCU40 | 150 | 180 | 210 | mm/r | 0,06–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,16 | 0,12–0,021 | 0,14–0,024 | |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05-0,07 | 0,06-0,08 | 0,07-0,10 | 0,05-0,10 | 0,06-0,013 | 0,08-0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,014 | ||
| I | DS | KCU40 | |||||||||||||
| 3 | S | O | LP | KCU40 | 150 | 190 | 230 | mm/r | 0,06-0,08 | 0,06-0,10 | 0,08-0,12 | 0,10-0,16 | 0,12-0,021 | 0,14-0,024 | |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05-0,07 | 0,06-0,08 | 0,07-0,10 | 0,05-0,10 | 0,06-0,013 | 0,08-0,014 | ||
| I | DS | KCU40 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 14,00–17,49 | SPGX06 DFT03 17,50–21,99 | SPGX07 DFT05 22.00–25,99 | SPGX09 DFT05 26.00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | |
| K | 1 | S | O | FP | KCPK10 | 200 | 240 | 300 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 |
| 1 | S | I | HP | KCU40 | 200 | 240 | 300 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 1 | U | O | FP | KCU25 | 120 | 155 | 200 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 1 | U | I | HP | KC7140 | 120 | 155 | 200 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 1 | I | O | FP | KC7140 | 80 | 100 | 125 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 1 | I | I | HP | KC7140 | 80 | 100 | 125 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | S | O | FP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 2 | S | I | HP | KCU40 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 2 | U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | U | I | HP | KC7140 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | I | I | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 3 | S | I | HP | KCU40 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 3 | U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | U | I | HP | KC7140 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | I | I | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 14–17,49 | SPGX06 DFT03 17,5–21,99 | SPGX07 DFT05 22,00–25,99 | SPGX09 DFT05 26,00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | ||||||
| K | 1 | S | O | FP | KCPK10 | 200 | 240 | 300 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 |
| I | HP | KCU40 | |||||||||||||
| U | O | FP | KCU25 | 120 | 155 | 200 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | FP | KC7140 | 80 | 100 | 125 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | FP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | ||
| I | HP | KC7140 | |||||||||||||
| N | 1 | S | O | LP | KCU40 | 150 | 190 | 230 | mm/r | 0,06–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,16 | 0,12–0,021 | 0,14–0,024 |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,014 | ||
| I | DS | KCU40 | |||||||||||||
| 2 | S | O | LP | KCU40 | 150 | 180 | 210 | mm/r | 0,06–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,16 | 0,12–0,021 | 0,14–0,024 | |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,014 | ||
| I | DS | KCU40 | |||||||||||||
| 3 | S | O | LP | KCU40 | 150 | 190 | 230 | mm/r | 0,06–0,08 | 0,06–0,10 | 0,08–0,12 | 0,10–0,16 | 0,12–0,021 | 0,14–0,024 | |
| I | DS | KCU40 | |||||||||||||
| U | O | LP | KCU40 | 100 | 130 | 160 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,016 | ||
| I | DS | KCU40 | |||||||||||||
| I | O | LP | KCU40 | 60 | 80 | 100 | mm/r | 0,05–0,07 | 0,06–0,08 | 0,07–0,10 | 0,05–0,10 | 0,06–0,013 | 0,08–0,014 | ||
| I | DS | KCU40 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 14,00–17,49 | SPGX06 DFT03 17,50–21,99 | SPGX07 DFT05 22.00–25,99 | SPGX09 DFT05 26.00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | |
| N | 1 | S | O | HP | KCPK10 | 350 | 500 | 650 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 |
| 1 | S | I | HP | KMF | 350 | 500 | 650 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 1 | U | O | HP | KCU40 | 300 | 400 | 500 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 1 | U | I | HP | KMF | 300 | 400 | 500 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 1 | I | O | HP | KCU40 | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 1 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | S | O | HP | KCPK10 | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 2 | S | I | HP | KMF | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 2 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | U | I | HP | KMF | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 2 | I | O | HP | KCU40 | 175 | 250 | 325 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 2 | I | I | HP | KMF | 175 | 250 | 325 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | S | O | HP | KCPK10 | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 3 | S | I | HP | KMF | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 3 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | U | I | HP | KMF | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 3 | I | O | HP | KCU40 | 150 | 250 | 350 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 3 | I | I | HP | KMF | 150 | 250 | 350 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | S | O | HP | KCU25 | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 4 | S | I | HP | KC7140 | 300 | 400 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 4 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 4 | U | I | HP | KC7140 | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 4 | I | O | HP | KCU40 | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 4 | I | I | HP | KC7140 | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | S | O | HP | KCU40 | 400 | 450 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 5 | S | I | HP | KMF | 400 | 450 | 500 | mm/r | 0,07–0,12 | 0,10–0,16 | 0,12–0,20 | 0,16–0,28 | 0,18–0,32 | 0,20–0,34 | |
| 5 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 5 | U | I | HP | KMF | 250 | 350 | 450 | mm/r | 0,05–0,09 | 0,06–0,12 | 0,08–0,15 | 0,12–0,20 | 0,14–0,25 | 0,16–0,28 | |
| 5 | I | O | HP | KCU40 | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| 5 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,13–0,25 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 14–17,49 | SPGX06 DFT03 17,5–21,99 | SPGX07 DFT05 22,00–25,99 | SPGX09 DFT05 26,00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | ||||||
| S | 1 | S | O | HP | KCU40 | 60 | 70 | 75 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 40 | 50 | 60 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
| I | MD | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 14,00–17,49 | SPGX06 DFT03 17,50–21,99 | SPGX07 DFT05 22.00–25,99 | SPGX09 DFT05 26.00–32,99 | SPGX12 DFT06/..07 33,00–43,99 | SPGX15 DFT07/..09 44,00–55,00 | |
| S | 1 | S | O | HP | KCU40 | 60 | 70 | 75 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 |
| 1 | S | I | MD | KC7140 | 60 | 70 | 75 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 1 | U | O | HP | KCU40 | 40 | 50 | 60 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 1 | U | I | MD | KC7140 | 40 | 50 | 60 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 1 | I | O | HP | KCU40 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 1 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 2 | S | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 2 | S | I | MD | KC7140 | 50 | 60 | 70 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 2 | U | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 2 | U | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 2 | I | O | HP | KCU40 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 2 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 3 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 3 | S | I | MD | KC7140 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 3 | U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 3 | U | I | MD | KC7140 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 3 | I | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 3 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 4 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 4 | S | I | MD | KC7140 | 70 | 80 | 90 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,05–0,10 | 0,08–0,12 | 0,10–0,15 | 0,12–0,18 | |
| 4 | U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 4 | U | I | MD | KC7140 | 50 | 60 | 70 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 4 | I | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
| 4 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,02–0,03 | 0,02–0,04 | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?