KM™-Systeme
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (1372)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(1372)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(1372)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1372)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1372)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1372)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1372)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1372)
- M Rostfreier Stahl (1358)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(1358)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1358)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1358)
- K Gusseisen (1391)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1391)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1391)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1387)
- N Buntmetalle (1310)
- N1Geschmiedetes Aluminium (1300)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(1299)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(844)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (1310)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (1229)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (1224)
- N7MMCs (1154)
- S Hochwarmfeste Legierungen (1368)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1362)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1368)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1362)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1341)
- H Gehärtete Werkstoffe (1089)
- H1Gehärtete Werkstoffe 44-48 HRC(1089)
- H2Gehärtete Werkstoffe 48-55 HRC(1089)
- H3Gehärtete Werkstoffe 56-60 HRC(1060)
- H4Gehärtete Werkstoffe >60 HRC(991)
Anwendungen
Anwendungen
Chamfer Turning (56)
Cut-Off (69)
Deep Grooving (41)
Face Grooving (41)
Facing (760)
Grooving (190)
ID Facing (6)
ID Grooving (73)
ID Thread Turning (127)
Multiple Direction Cutting (894)
OD Thread Turning (157)
Plunge Turning (50)
Profiling (774)
TRN Boring (706)
Turning (1002)
Gewindeart
Gewindeart
- 55 (71)
- 60 (195)
- ACME (147)
- API (95)
- API BUTTRESS (13)
- API RD (105)
- BSPT (55)
- BSW (125)
- BUTTRESS (124)
- M (97)
- NPT (109)
- NPTF (53)
- RD DIN 405 (63)
- STUB ACME (120)
- TR DIN 103 (66)
- UN (179)
- UNJ (109)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (1304)
- Lightly Interrupted Cut (1324)
- Smooth Cut (1328)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (65)
- 48.0 (13)
- 49.783 (3)
- 50.0 (3)
- 61.0 (2)
- 62.5 (20)
- 63.0 (8)
- 72.5 (3)
- 75.0 (149)
- 85.0 (4)
- 90.0 (382)
- 91.0 (2)
- 93.0 (356)
- 95.0 (334)
- 107.5 (82)
bis
Anschlussart
Anschlussart
- Cutoff Support Blade A1-A3 (3)
- KM (985)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (13)
- 1.0 (855)
- 2.0 (928)
- 3.0 (241)
- 4.0 (776)
- 6.0 (127)
- 8.0 (384)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 1.181 mm(1)
- 15.0 mm(7)
- 20.0 mm(82)
- 20.252 mm(1)
- 25.0 mm(49)
- 25.198 mm(2)
- 30.0 mm(154)
- 35.0 mm(50)
- 40.0 mm(137)
- 45.0 mm(40)
- 46.0 mm(5)
- 47.0 mm(8)
- 50.0 mm(193)
- 55.0 mm(1)
- 58.0 mm(3)
- 60.0 mm(262)
- 70.0 mm(166)
- 80.0 mm(32)
- 89.31 mm(1)
- 90.0 mm(51)
- 97.0 mm(2)
- 100.0 mm(43)
- 101.6 mm(9)
- 110.0 mm(43)
- 115.0 mm(16)
- 120.0 mm(1)
- 122.4 mm(2)
- 125.0 mm(26)
- 140.0 mm(55)
- 170.0 mm(9)
bis
availability
gsaApproval
gsaApproval
Eckenradius
Eckenradius
- 0.0 mm(96)
- 0.025 mm(125)
- 0.05 mm(182)
- 0.075 mm(220)
- 0.1 mm(828)
- 0.125 mm(89)
- 0.15 mm(145)
- 0.175 mm(150)
- 0.2 mm(899)
- 0.225 mm(99)
- 0.25 mm(168)
- 0.275 mm(65)
- 0.3 mm(91)
- 0.325 mm(129)
- 0.35 mm(258)
- 0.375 mm(5)
- 0.4 mm(1066)
- 0.425 mm(28)
- 0.45 mm(82)
- 0.475 mm(38)
- 0.5 mm(123)
- 0.525 mm(16)
- 0.55 mm(11)
- 0.575 mm(84)
- 0.6 mm(87)
- 0.625 mm(9)
- 0.65 mm(7)
- 0.7 mm(17)
- 0.725 mm(12)
- 0.75 mm(61)
- 0.775 mm(99)
- 0.8 mm(1069)
- 0.825 mm(3)
- 0.9 mm(79)
- 0.925 mm(9)
- 0.95 mm(9)
- 0.975 mm(3)
- 1.0 mm(121)
- 1.05 mm(4)
- 1.075 mm(12)
- 1.2 mm(1070)
- 1.25 mm(99)
- 1.4 mm(5)
- 1.5 mm(116)
- 1.55 mm(17)
- 1.575 mm(58)
- 1.6 mm(893)
- 1.65 mm(4)
- 1.75 mm(99)
- 1.975 mm(54)
- 2.0 mm(70)
- 2.05 mm(4)
- 2.25 mm(54)
- 2.375 mm(57)
- 2.4 mm(244)
- 2.5 mm(27)
- 2.525 mm(2)
- 2.575 mm(2)
- 3.175 mm(54)
- 3.2 mm(34)
- 4.0 mm(31)
- 4.775 mm(4)
- 5.0 mm(3)
- 6.0 mm(4)
- 6.35 mm(13)
- 8.0 mm(1)
- 10.0 mm(3)
- 12.5 mm(5)
- 16.0 mm(4)
bis
application
Minimale Schnitttiefe
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- C3 (5)
- CBN6 (5)
- CG5 (53)
- CG6 (17)
- CM1 (18)
- CW2015 (503)
- CW3020 (15)
- CW5025 (343)
- HWK10 (4)
- K00326 (29)
- K060 (141)
- K090 (95)
- K1 (30)
- K313 (1078)
- K420 (125)
- K68 (894)
- K8735 (29)
- KB1340 (259)
- KB1345 (366)
- KB1610 (525)
- KB1630 (473)
- KB5610 (395)
- KB5630 (408)
- KB9640 (11)
- KBH10 (650)
- KBH10B (735)
- KBH20 (786)
- KBH20B (724)
- KBK45 (11)
- KC5010 (1274)
- KC5020P (16)
- KC5025 (1253)
- KC5410 (936)
- KC720 (140)
- KC730 (952)
- KC850 (1121)
- KC9110 (13)
- KC9125 (17)
- KCK05 (865)
- KCK05B (365)
- KCK15 (891)
- KCK15B (943)
- KCK20 (1071)
- KCK20B (1029)
- KCM15 (909)
- KCM15B (896)
- KCM25 (1003)
- KCM25B (972)
- KCM25S (55)
- KCM35 (842)
- KCM35B (485)
- KCP05 (729)
- KCP05B (670)
- KCP10 (1067)
- KCP10B (1163)
- KCP10C (55)
- KCP15 (18)
- KCP20S (55)
- KCP25 (1041)
- KCP25B (1203)
- KCP25C (1267)
- KCP30 (935)
- KCP30B (583)
- KCP40 (680)
- KCP40B (754)
- KCPK05 (752)
- KCS10 (376)
- KCS10B (969)
- KCS25S (55)
- KCU10 (1224)
- KCU10B (1230)
- KCU20B (74)
- KCU25 (1206)
- KCU25B (1228)
- KD1400 (526)
- KD1405 (391)
- KD1425 (651)
- KMF (3)
- KMS (15)
- KN10S (71)
- KS15 (170)
- KT315 (982)
- KT325 (253)
- KTP10 (777)
- KTP25S (605)
- KY1540 (160)
- KY1615 (14)
- KY3500 (722)
- KY4300 (337)
- KY4400 (625)
- KYHK15B (690)
- KYK10 (356)
- KYK25 (480)
- KYS25 (227)
- KYS30 (403)
- MC3 (4)
- PB100 (129)
- PB250 (10)
- PN120 (13)
- SP4019 (177)
- THM (510)
- THM-X (327)
- THMF-X (211)
- TN10P (653)
- TN10U (539)
- TN15M (477)
- TN15U (382)
- TN2000 (512)
- TN20K (675)
- TN20P (767)
- TN30M (531)
- TN30P (459)
- TN4000 (471)
- TN6010 (385)
- TN6025 (246)
- TN7 (5)
- TTM09 (7)
- TTR (29)
- TTR-X (30)
- TTS (256)
- W00160 (7)
- W00162 (19)
- WBH10P (336)
- WBH10U (177)
- WBH20P (565)
- WBH30P (395)
- WBK40U (55)
- WBK45U (103)
- WDN00U (283)
- WDN10U (5)
- WDN25U (475)
- WK05CT (699)
- WK15CT (480)
- WK20CT (846)
- WM15CT (744)
- WM25CT (827)
- WM35CT (573)
- WP05CT (182)
- WP15CT (877)
- WP20TT (40)
- WP25CT (891)
- WP35CT (692)
- WS10PT (730)
- WS25PT (746)
- WU05PT (84)
- WU10HT (766)
- WU10PT (703)
- WU25PT (675)
- WU35PT (8)
- X00580 (141)
- X00581 (141)
- X00582 (141)
- X00583 (141)
- X00584 (141)
- X00585 (141)
- X00586 (141)
- X00591 (141)
- X00592 (141)
- X00593 (141)
- X00594 (141)
- X00596 (141)
- X00597 (141)
- X00599 (141)
Schneidrichtung
Schneidrichtung
- L (454)
- N (52)
- N - Neutral (3)
- R (479)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (1405)
- Y (545)
F Abmessung
F Abmessung
- 0.0 mm(54)
- 1.7 mm(1)
- 2.0 mm(2)
- 4.0 mm(1)
- 5.0 mm(1)
- 5.75 mm(3)
- 5.79 mm(2)
- 7.0 mm(15)
- 7.35 mm(3)
- 7.52 mm(2)
- 7.53 mm(1)
- 8.0 mm(45)
- 8.05 mm(2)
- 8.5 mm(2)
- 9.0 mm(19)
- 10.0 mm(75)
- 11.0 mm(31)
- 12.5 mm(36)
- 13.0 mm(32)
- 16.0 mm(38)
- 17.0 mm(92)
- 20.539 mm(2)
- 22.0 mm(124)
- 24.0 mm(13)
- 25.3 mm(1)
- 27.0 mm(130)
- 28.5 mm(2)
- 30.0 mm(18)
- 32.0 mm(2)
- 35.0 mm(70)
- 38.0 mm(18)
- 43.0 mm(66)
- 48.0 mm(17)
- 53.0 mm(51)
- 59.0 mm(2)
bis
Minimaler Bohrungsdurchmesser
Minimaler Bohrungsdurchmesser
- 11.1 mm(3)
- 11.15 mm(2)
- 13.0 mm(15)
- 14.25 mm(3)
- 16.0 mm(19)
- 18.5 mm(5)
- 20.0 mm(26)
- 25.0 mm(31)
- 32.0 mm(78)
- 34.0 mm(6)
- 40.0 mm(81)
- 44.0 mm(1)
- 50.0 mm(52)
- 54.0 mm(5)
- 63.0 mm(14)
- 64.0 mm(2)
- 70.0 mm(4)
- 86.0 mm(4)
- 106.0 mm(10)
- 118.0 mm(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(51)
- 11.1 mm(3)
- 11.15 mm(2)
- 13.0 mm(15)
- 14.25 mm(3)
- 16.0 mm(19)
- 18.5 mm(5)
- 20.0 mm(26)
- 25.0 mm(37)
- 32.0 mm(87)
- 34.0 mm(6)
- 40.0 mm(85)
- 41.3 mm(20)
- 44.0 mm(18)
- 47.6 mm(20)
- 50.0 mm(86)
- 54.0 mm(51)
- 56.625 mm(20)
- 57.2 mm(11)
- 60.0 mm(2)
- 63.0 mm(32)
- 64.0 mm(2)
- 70.0 mm(54)
- 74.0 mm(4)
- 80.0 mm(58)
- 86.0 mm(91)
- 88.9 mm(40)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(45)
- 104.0 mm(2)
- 106.0 mm(71)
- 118.0 mm(2)
- 120.0 mm(3)
- 139.7 mm(20)
- 150.0 mm(1)
- 174.6 mm(20)
- 180.0 mm(4)
- 209.6 mm(11)
- 222.3 mm(11)
- 850.0 mm(4)
- 2000.0 mm(4)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- 26.0 mm(2)
- 27.0 mm(2)
- 32.0 mm(10)
- 9999.0 mm(128)
bis
Schneidrichtung
Schneidrichtung
- B (233)
- E (243)
- P (4)
- S (507)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (527)
- DOUBLE POSITIVE (4)
- NEGATIVE-ZERO (71)
- NEUTRAL (ZERO) (335)
- POSITIVE-NEGATIVE (1)
- POSITIVE-ZERO (38)
Bohrungstiefe min.
Bohrungstiefe min.
- 35.0 mm(30)
- 35.16 mm(5)
- 35.19 mm(2)
- 36.33 mm(1)
- 38.3 mm(3)
- 40.0 mm(82)
- 41.0 mm(5)
- 42.0 mm(3)
- 42.01 mm(2)
- 42.03 mm(2)
- 42.21 mm(7)
- 42.27 mm(2)
- 43.21 mm(2)
- 45.0 mm(19)
- 49.22 mm(2)
- 50.0 mm(111)
- 50.45 mm(2)
- 51.8 mm(3)
- 55.0 mm(1)
- 55.09 mm(15)
- 56.0 mm(2)
- 56.11 mm(11)
- 56.16 mm(2)
- 58.0 mm(4)
- 60.0 mm(150)
- 60.47 mm(4)
- 62.07 mm(3)
- 70.0 mm(80)
- 70.02 mm(12)
- 70.11 mm(2)
- 70.32 mm(4)
- 70.36 mm(1)
- 70.47 mm(6)
- 75.0 mm(3)
- 75.04 mm(17)
- 76.02 mm(8)
- 77.14 mm(4)
- 77.33 mm(8)
- 79.55 mm(1)
- 80.0 mm(13)
- 80.04 mm(2)
- 81.26 mm(4)
- 87.23 mm(8)
- 87.5 mm(4)
- 88.11 mm(2)
- 88.23 mm(8)
- 88.29 mm(2)
- 88.3 mm(2)
- 88.52 mm(2)
- 91.26 mm(4)
- 91.28 mm(2)
- 96.02 mm(12)
- 96.26 mm(7)
- 99.25 mm(1)
- 100.0 mm(8)
- 104.4 mm(4)
- 112.07 mm(12)
- 112.22 mm(2)
- 113.37 mm(1)
- 115.0 mm(16)
- 117.14 mm(10)
- 117.38 mm(1)
- 120.0 mm(2)
- 120.02 mm(4)
- 120.34 mm(12)
- 140.0 mm(4)
- 149.4 mm(8)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- C (7)
- S (355)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (86)
- CARTRIDGE MOUNT (47)
- COMBI SHELL ADAPTER (19)
- CUTOFF SUPPORT BLADE (22)
- DRILL CHUCK ADAPTER (4)
- DRILL SHANK 2 FLATS (8)
- END MILL ADAPTER (81)
- ER COLLET CHUCK (42)
- EXTENSION (15)
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- HYDRAULIC CHUCK-SLIM LINE (15)
- KM MODULAR ADAPTER (75)
- KM MODULAR ADAPTER-4 UNITS (2)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (41)
- SCREW-ON ADAPTER (16)
- SHELL MILL ADAPTER (65)
- SHRINK FIT ADAPTER (48)
- SQUARE SHANK ADAPTER (48)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- TAP CHUCK ADAPTER (4)
- WHISTLE DRIVE ADAPTER (3)
- WHISTLE NOTCH ADAPTER (39)
Spannsystem
Spannsystem
- C (32)
- D (118)
- M (469)
- N (179)
- P (248)
- S (312)
- W (2)
- Y (64)
Schnittbreite
Schnittbreite
- 0.5 mm(45)
- 0.787 mm(45)
- 0.8 mm(45)
- 0.889 mm(22)
- 0.991 mm(45)
- 1.0 mm(99)
- 1.041 mm(45)
- 1.19 mm(73)
- 1.194 mm(99)
- 1.2 mm(99)
- 1.39 mm(45)
- 1.397 mm(22)
- 1.4 mm(49)
- 1.404 mm(4)
- 1.473 mm(45)
- 1.49 mm(11)
- 1.5 mm(110)
- 1.55 mm(1)
- 1.57 mm(77)
- 1.575 mm(99)
- 1.6 mm(5)
- 1.69 mm(22)
- 1.7 mm(45)
- 1.702 mm(45)
- 1.75 mm(99)
- 1.829 mm(54)
- 1.94 mm(23)
- 1.95 mm(45)
- 1.956 mm(23)
- 1.981 mm(54)
- 1.99 mm(12)
- 2.0 mm(115)
- 2.007 mm(45)
- 2.12 mm(4)
- 2.125 mm(16)
- 2.13 mm(12)
- 2.2 mm(101)
- 2.235 mm(76)
- 2.236 mm(26)
- 2.24 mm(45)
- 2.25 mm(73)
- 2.38 mm(3)
- 2.387 mm(30)
- 2.388 mm(106)
- 2.39 mm(28)
- 2.464 mm(54)
- 2.49 mm(3)
- 2.5 mm(106)
- 2.51 mm(4)
- 2.511 mm(4)
- 2.62 mm(3)
- 2.667 mm(54)
- 2.74 mm(23)
- 2.743 mm(22)
- 2.75 mm(99)
- 2.794 mm(54)
- 2.997 mm(76)
- 3.0 mm(141)
- 3.05 mm(13)
- 3.099 mm(54)
- 3.1 mm(13)
- 3.11 mm(13)
- 3.12 mm(13)
- 3.125 mm(4)
- 3.13 mm(13)
- 3.17 mm(54)
- 3.175 mm(141)
- 3.176 mm(4)
- 3.177 mm(4)
- 3.18 mm(49)
- 3.2 mm(89)
- 3.245 mm(45)
- 3.25 mm(54)
- 3.251 mm(26)
- 3.27 mm(23)
- 3.3 mm(4)
- 3.301 mm(4)
- 3.302 mm(4)
- 3.32 mm(26)
- 3.5 mm(124)
- 3.607 mm(54)
- 3.81 mm(22)
- 3.82 mm(22)
- 3.835 mm(22)
- 3.84 mm(45)
- 3.96 mm(54)
- 3.962 mm(54)
- 3.974 mm(26)
- 3.988 mm(54)
- 4.0 mm(83)
- 4.094 mm(4)
- 4.1 mm(4)
- 4.11 mm(4)
- 4.12 mm(4)
- 4.242 mm(25)
- 4.25 mm(54)
- 4.5 mm(79)
- 4.521 mm(54)
- 4.699 mm(54)
- 4.76 mm(4)
- 4.762 mm(4)
- 4.775 mm(79)
- 4.78 mm(12)
- 4.785 mm(12)
- 4.788 mm(13)
- 4.8 mm(54)
- 4.801 mm(79)
- 4.88 mm(26)
- 4.95 mm(54)
- 4.953 mm(26)
- 4.978 mm(54)
- 5.0 mm(27)
- 5.004 mm(13)
- 5.1 mm(2)
- 5.12 mm(2)
- 5.125 mm(2)
- 5.13 mm(2)
- 5.41 mm(25)
- 5.5 mm(25)
- 6.0 mm(25)
- 6.35 mm(26)
- 6.36 mm(13)
- 6.502 mm(25)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(1)
- 9.677 mm(3)
- 9.754 mm(2)
bis
Stirnseitentyp
Stirnseitentyp
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (77)
- KMM - KM Micro System (46)
- KMS - KM TBD System (21)
- KMT - KM Adapter (51)
- MCS - Modular Cartridge System (47)
- PMK - Prismatic Adapter Kenna (22)
- SPK-Holding Arbor-Spindle Head (7)
- SWB - Tap Chuck Adapter (6)
- SZK - Collet Taper (42)
- VKT - Square Shank (51)
- ZYL - Cylindrical Adapter (345)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (318)
- D-DIAMOND/RHOMBIC 55 (328)
- FIX-PERFECT 8 CUT EDGES (12)
- LT-TRIANGLE LAY DOWN THREAD 60 (84)
- N/K-PARALLELOGRAM 55 (4)
- PRISMATIC (64)
- R-ROUND (38)
- S-SQUARE 90 (153)
- T-TRIANGLE 60 (108)
- TN-TOP NOTCH (129)
- V-DIAMOND/RHOMBIC 35 (114)
- W-TRIGON 80 (74)
Kurzklemmhalter-Größe
Kurzklemmhalter-Größe
- 19 (2)
- 26 (10)
- 32 (4)
- 50 (26)
- 65 (21)
Stirnseitenausführung
Stirnseitenausführung
- BKA01 Intchg Heads (H) Pilot (7)
- FDA03 Longit &Transver Drive (2)
- FDA12 Transv Drive&CutRetScr (10)
- FDA13 Long&TranDrv&CutRetScr (10)
- FDA22 Transv Drive & SHCS (44)
- FDA23 Longit&Transv Drv&SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (4)
- KMM01 Std Km-Micro Size (24)
- KMM02 Enlarged Flange (22)
- KMS-01 Std KM-TBD NotOnCntr (8)
- KMS-02 Englarged Flange OnCntr (13)
- KMT00 All KM, except 02,05,09 (51)
- MCS01 Modular Deep Grooving (47)
- PMK02 Cutoff Sup Bld A1-A3 (14)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
- SPK02 Bolt Circ Dia 101.6 mm (7)
- SWB-01 WFL#...WES#(Bilz) (6)
- SZK02 Collets 8 Degree Taper (42)
- VKT01 Std Design (51)
- ZYL01 Straight Shank (105)
- ZYL03 Attachment Thread (16)
- ZYL10 Weldon Shank (71)
- ZYL13 2Deg-Whistle Notch (39)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (93)
- ZYL56 2Plain Clamp Surf w/Pcs (8)
- ZYL63 2Deg Surf w/Cyl.w/drive (3)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 1 (11)
- 1B (4)
- 1F (4)
- 2 (61)
- 2B (3)
- 3 (71)
- 4 (29)
- 5 (5)
- 6 (2)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.0 mm(13)
- 3.0 mm(3)
- 3.18 mm(1)
- 3.51 mm(18)
- 4.5 mm(3)
- 5.33 mm(27)
- 7.47 mm(8)
- 7.61 mm(2)
- 9.0 mm(1)
- 10.25 mm(3)
- 10.54 mm(2)
- 11.0 mm(1)
- 13.0 mm(20)
- 13.5 mm(5)
- 14.0 mm(11)
- 14.5 mm(2)
- 16.0 mm(21)
- 19.0 mm(1)
- 20.0 mm(1)
- 33.0 mm(1)
- 40.15 mm(2)
bis
Messlänge
Messlänge
- 4.8000 mm(6)
- 14.0000 mm(9)
- 16.0000 mm(9)
- 17.0000 mm(1)
- 18.0000 mm(1)
- 20.0000 mm(2)
- 23.0000 mm(4)
- 23.4000 mm(2)
- 25.0000 mm(12)
- 26.0000 mm(11)
- 28.0000 mm(7)
- 28.0120 mm(2)
- 28.2860 mm(2)
- 30.0000 mm(21)
- 31.4450 mm(1)
- 32.0000 mm(20)
- 35.0000 mm(4)
- 35.1820 mm(2)
- 35.2500 mm(4)
- 36.0000 mm(2)
- 37.6000 mm(4)
- 38.0000 mm(4)
- 38.1000 mm(1)
- 38.8990 mm(2)
- 40.0000 mm(24)
- 42.0000 mm(1)
- 43.0000 mm(3)
- 44.9600 mm(1)
- 45.0000 mm(20)
- 45.0500 mm(1)
- 46.9000 mm(4)
- 47.0000 mm(7)
- 48.0000 mm(6)
- 48.2500 mm(1)
- 49.2000 mm(2)
- 50.0000 mm(15)
- 50.0500 mm(1)
- 50.3000 mm(2)
- 51.0000 mm(1)
- 53.5000 mm(4)
- 55.0000 mm(17)
- 55.3000 mm(4)
- 57.0000 mm(4)
- 57.1500 mm(2)
- 58.0000 mm(4)
- 58.4000 mm(1)
- 58.5000 mm(7)
- 59.0000 mm(4)
- 60.0000 mm(38)
- 63.0000 mm(4)
- 63.5000 mm(10)
- 65.0000 mm(29)
- 66.5000 mm(4)
- 70.0000 mm(36)
- 70.0500 mm(1)
- 75.0000 mm(14)
- 75.0500 mm(1)
- 76.2000 mm(3)
- 77.6000 mm(1)
- 78.0000 mm(2)
- 78.6900 mm(1)
- 80.0000 mm(52)
- 82.5500 mm(2)
- 84.0000 mm(3)
- 85.0000 mm(20)
- 85.7250 mm(1)
- 88.9000 mm(3)
- 89.3100 mm(1)
- 90.0000 mm(30)
- 95.0000 mm(14)
- 95.2500 mm(1)
- 97.0000 mm(4)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 99.9000 mm(1)
- 100.0000 mm(40)
- 101.6000 mm(10)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 105.0000 mm(16)
- 109.0000 mm(5)
- 110.0000 mm(5)
- 110.9000 mm(1)
- 114.0000 mm(2)
- 114.3000 mm(4)
- 115.0000 mm(4)
- 115.1000 mm(1)
- 120.0000 mm(18)
- 122.4000 mm(2)
- 123.8000 mm(2)
- 125.0000 mm(3)
- 127.0000 mm(1)
- 130.0000 mm(4)
- 134.0000 mm(2)
- 134.2900 mm(1)
- 134.5500 mm(2)
- 137.0000 mm(1)
- 139.7000 mm(2)
- 140.0000 mm(2)
- 147.0000 mm(1)
- 150.0000 mm(1)
- 152.8000 mm(1)
- 160.0000 mm(9)
- 165.1000 mm(1)
- 170.0000 mm(9)
- 187.0000 mm(1)
- 207.3300 mm(1)
- 215.9000 mm(1)
- 230.0000 mm(1)
- 234.0000 mm(1)
- 234.5500 mm(2)
- 243.5600 mm(1)
- 283.5000 mm(1)
- 310.7100 mm(2)
- 334.3100 mm(1)
- 359.7300 mm(1)
- 361.5200 mm(2)
- 385.1100 mm(1)
- 386.9200 mm(2)
- 412.3200 mm(2)
- 486.7300 mm(1)
- 513.9200 mm(2)
Größe der Stirnseite
Größe der Stirnseite
- 0.5 mm(1)
- 1.0 mm(1)
- 2.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(17)
- 6.35 mm(3)
- 7.938 mm(3)
- 8.0 mm(18)
- 9.525 mm(12)
- 9.55 mm(1)
- 10.0 mm(19)
- 11.113 mm(1)
- 12.0 mm(29)
- 12.7 mm(19)
- 14.0 mm(10)
- 14.288 mm(1)
- 15.875 mm(15)
- 16.0 mm(36)
- 18.0 mm(9)
- 19.027 mm(2)
- 19.05 mm(26)
- 19.06 mm(1)
- 20.0 mm(40)
- 20.18 mm(1)
- 22.0 mm(9)
- 22.225 mm(1)
- 25.0 mm(28)
- 25.4 mm(27)
- 25.41 mm(1)
- 27.0 mm(11)
- 31.0 mm(1)
- 31.027 mm(2)
- 31.75 mm(25)
- 32.0 mm(48)
- 38.1 mm(16)
- 38.11 mm(1)
- 40.0 mm(36)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(15)
- 50.79 mm(1)
- 50.8 mm(11)
- 60.0 mm(2)
- 63.0 mm(10)
- 63.49 mm(2)
- 63.5 mm(4)
- 80.0 mm(4)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (753)
- B L (803)
- C A (715)
- C N (726)
- D P (799)
- H T (987)
- H W (1387)
backEnd
Aufnahmeart
Aufnahmeart
- Cutoff Blade (3)
- TAPER SHANK (985)
Systemgröße
Systemgröße
- KM12 (47)
- KM16 (84)
- KM1612 (1)
- KM20 (52)
- KM2016 (16)
- KM25 (76)
- KM32 (56)
- KM3225 (44)
- KM32TS (24)
- KM40TS (273)
- KM50TS (262)
- KM63TS (309)
- KM63UT (1)
- KM63XMZ (159)
- KM80 (5)
- KM80ATC (108)
- KM80TS (116)
Hinterer Durchmesser
Hinterer Durchmesser
- 10.0 mm(1)
- 12.0 mm(45)
- 12.7 mm(2)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(84)
- 17.0 mm(1)
- 18.0 mm(1)
- 19.0 mm(1)
- 19.05 mm(5)
- 20.0 mm(84)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(79)
- 25.4 mm(3)
- 31.75 mm(2)
- 32.0 mm(151)
- 38.1 mm(8)
- 40.0 mm(378)
- 50.0 mm(366)
- 63.0 mm(615)
- 80.0 mm(282)
bis
Schafthöhe
Schafthöhe
- 0.0 mm(4)
- 11.95 mm(1)
- 12.0 mm(2)
- 12.7 mm(4)
- 15.75 mm(2)
- 15.875 mm(2)
- 16.0 mm(6)
- 19.0 mm(3)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(1)
- 25.4 mm(4)
bis
Schaftbreite
Schaftbreite
- 1.8 mm(3)
- 12.0 mm(3)
- 12.58 mm(2)
- 12.7 mm(2)
- 15.75 mm(2)
- 15.875 mm(2)
- 16.0 mm(6)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(1)
- 25.4 mm(4)
bis
No filters matching ""
