Sistemas HTS • Cabeçotes ajustáveis com pastilhas DFT
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (100)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(100)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(100)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(100)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(100)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(100)
- M Stainless Steel (100)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(100)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(100)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(100)
- K Cast Iron (100)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(100)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(100)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(100)
- N Non-Ferrous Materials (100)
- N1Wrought Aluminum (100)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(100)
- N3High-Silicon Aluminum Alloys Si >12.2%(100)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (100)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (100)
- N6Carbon, Graphite Composites, CFRP (100)
- N7MMC's (100)
- S High-Temp Alloys (100)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(100)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(100)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(100)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(100)
- H Hardened Materials (82)
- H1Hardened Materials 44-48 HRC(82)
- H2Hardened Materials 48-55 HRC(82)
- H3Hardened Materials 56-60 HRC(82)
- H4Hardened Materials >60 HRC(82)
Applications
Applications
Convex Drilling (1)
Drilling (46)
Cutting Diameter
Cutting Diameter
- 0.315 in(3)
- 0.394 in(3)
- 0.591 in(3)
- 0.787 in(3)
- 0.984 in(3)
- 1.181 in(3)
- 1.772 in(1)
- 1.969 in(1)
- 2.165 in(1)
- 2.283 in(1)
- 2.48 in(2)
- 2.677 in(1)
- 2.874 in(1)
- 3.071 in(2)
- 3.307 in(1)
- 3.543 in(1)
- 3.781 in(2)
- 4.016 in(1)
- 4.252 in(1)
- 4.529 in(1)
- 4.803 in(1)
- 5.118 in(1)
- 5.513 in(1)
- 5.906 in(1)
- 6.22 in(1)
- 6.378 in(1)
- 7.087 in(1)
- 7.678 in(1)
- 8.387 in(1)
- 9.055 in(1)
- 10.236 in(1)
a
Cutting Diameter
Cutting Diameter
- 8.0 mm(3)
- 10.0 mm(3)
- 15.0 mm(3)
- 20.0 mm(3)
- 25.0 mm(3)
- 30.0 mm(3)
- 45.0 mm(1)
- 50.0 mm(1)
- 55.0 mm(1)
- 58.0 mm(1)
- 63.0 mm(2)
- 68.0 mm(1)
- 73.0 mm(1)
- 78.0 mm(2)
- 84.0 mm(1)
- 90.0 mm(1)
- 96.0 mm(2)
- 102.0 mm(1)
- 108.0 mm(1)
- 115.0 mm(1)
- 122.0 mm(1)
- 130.0 mm(1)
- 140.0 mm(1)
- 150.0 mm(1)
- 158.0 mm(1)
- 162.0 mm(1)
- 180.0 mm(1)
- 195.0 mm(1)
- 213.0 mm(1)
- 230.0 mm(1)
- 260.0 mm(1)
a
Cutting Condition
Cutting Condition
- Interrupted (54)
- Stable (54)
- Unstable (54)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 500.0 mm(1)
- 550.0 mm(1)
- 580.0 mm(1)
- 630.0 mm(1)
- 680.0 mm(2)
- 750.0 mm(7)
- 780.0 mm(3)
- 1000.0 mm(5)
- 1060.0 mm(3)
- 1360.0 mm(4)
a
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 19.685 in(1)
- 21.654 in(1)
- 22.835 in(1)
- 24.803 in(1)
- 26.773 in(2)
- 29.529 in(7)
- 30.709 in(3)
- 39.37 in(5)
- 41.732 in(3)
- 53.543 in(4)
a
Reach
Reach
- 0.37 in(1)
- 0.445 in(1)
- 0.681 in(1)
- 0.906 in(1)
- 1.143 in(1)
- 1.417 in(1)
a
Reach
Reach
- 9.4 mm(1)
- 11.3 mm(1)
- 17.3 mm(1)
- 23.0 mm(1)
- 29.0 mm(1)
- 36.0 mm(1)
a
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- -8888.0 (28)
a
Connection Style
Connection Style
- HTS (28)
- HTS Pilot Drill Shank (18)
Number of Flutes
Number of Flutes
- 2 (46)
Over All Length [L]
Over All Length [L]
- 1.079 in(1)
- 1.496 in(1)
- 1.752 in(1)
- 2.008 in(1)
- 2.265 in(1)
- 2.717 in(1)
- 3.346 in(2)
- 3.938 in(3)
- 4.529 in(4)
- 4.724 in(4)
- 5.118 in(3)
- 5.71 in(3)
- 6.299 in(4)
- 7.283 in(2)
- 7.875 in(1)
- 9.055 in(2)
a
Over All Length [L]
Over All Length [L]
- 27.401 mm(1)
- 38.0 mm(1)
- 44.5 mm(1)
- 51.0 mm(1)
- 57.5 mm(1)
- 69.0 mm(1)
- 85.0 mm(2)
- 100.0 mm(3)
- 115.0 mm(4)
- 120.0 mm(4)
- 130.0 mm(3)
- 145.0 mm(3)
- 160.0 mm(4)
- 185.0 mm(2)
- 200.0 mm(1)
- 230.0 mm(2)
a
Corner Radius
Corner Radius
- 0.008 in(4)
- 0.012 in(4)
- 0.016 in(50)
- 0.024 in(4)
- 0.031 in(76)
- 0.039 in(35)
- 0.047 in(44)
- 0.063 in(40)
- 0.079 in(19)
a
Corner Radius
Corner Radius
- 0.2 mm(4)
- 0.301 mm(4)
- 0.4 mm(50)
- 0.601 mm(4)
- 0.8 mm(76)
- 1.0 mm(35)
- 1.201 mm(44)
- 1.6 mm(40)
- 2.0 mm(19)
a
Corner Chamfer
Corner Chamfer
- 0.0 mm(54)
a
Corner Chamfer
Corner Chamfer
- 0.0 in(54)
a
application
Coating
Coating
- TiN (12)
Grade Of Cutting Tool
Grade Of Cutting Tool
- A30 (6)
- AS3 (6)
- CD4 (44)
- CM4 (35)
- CS5 (82)
- K6 (10)
- KC7140 (82)
- KC720 (82)
- KC7210 (35)
- KC7215 (82)
- KC7225 (82)
- KC7315 (6)
- KC7815 (82)
- KC7820 (72)
- KC7845 (10)
- KC7935 (82)
- KC810 (82)
- KC990 (82)
- KCMS35 (82)
- KCPK10 (82)
- KCU25 (82)
- KCU40 (82)
- KD1425 (82)
- KM1 (44)
- KMF (82)
- KU40D (82)
Hand Of Tool
Hand Of Tool
- R (46)
Drill Type
Drill Type
- 81-06 (18)
- 86-01 (28)
frontEnd
Insert Shape
Insert Shape
- S-SQUARE 90 (44)
- W-TRIGON 80 (38)
- X-TRIGON 84 (44)
Point Angle
Point Angle
- 118.0 (46)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- D P (54)
- H W (54)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (18)
- HTS SHANK (28)
Back-End Diameter
Back-End Diameter
- 8.0 mm(3)
- 10.0 mm(3)
- 13.0 mm(2)
- 15.0 mm(3)
- 16.0 mm(3)
- 20.0 mm(3)
- 22.0 mm(4)
- 25.0 mm(3)
- 27.0 mm(4)
- 30.0 mm(3)
- 32.0 mm(3)
- 40.0 mm(3)
- 50.0 mm(4)
- 60.0 mm(3)
- 80.0 mm(2)
a
Back-End Diameter
Back-End Diameter
- 0.315 in(3)
- 0.394 in(3)
- 0.512 in(2)
- 0.591 in(3)
- 0.63 in(3)
- 0.787 in(3)
- 0.866 in(4)
- 0.984 in(3)
- 1.063 in(4)
- 1.181 in(3)
- 1.26 in(3)
- 1.575 in(3)
- 1.969 in(4)
- 2.362 in(3)
- 3.15 in(2)
a
No filters matching ""
