Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Cápsulas

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
    • M Stainless Steel (2)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
    • K Cast Iron (2)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
    • N Non-Ferrous Materials (2)
      • N1
        Wrought Aluminum (2)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
      • N6
        Carbon, Graphite Composites, CFRP (2)
    • S High-Temp Alloys (2)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
    Applications
    Applications
    • Face GroovingFace Grooving (2)
    • GroovingGrooving (2)
    • ThreadingThreading (2)
    Type of Thread
    Type of Thread
    • 60 (2)
    • BUTTRESS (2)
    • M (1)
    • UN (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2)
    • Lightly Interrupted Cut (2)
    • Smooth Cut (2)
    • Varying Depth of Cut (2)
    Over All Length [L]
    Over All Length [L]
    • 2.165 in(1)
    • 2.192 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 55.0 mm(1)
    • 55.676 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(2)
    • 0.004 in(2)
    • 0.007 in(1)
    • 0.008 in(2)
    • 0.01 in(1)
    • 0.02 in(2)
    • 0.03 in(2)
    • 0.031 in(2)
    • 0.039 in(2)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.06 in(2)
    • 0.063 in(2)
    • 0.069 in(2)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(2)
    • 0.1 mm(2)
    • 0.176 mm(1)
    • 0.2 mm(2)
    • 0.25 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(2)
    • 0.775 mm(2)
    • 1.0 mm(2)
    • 1.201 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(2)
    • 1.6 mm(2)
    • 1.75 mm(2)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (2)
    • K313 (2)
    • K420 (2)
    • K4H (1)
    • K68 (2)
    • KC250 (2)
    • KC5010 (2)
    • KC5025 (2)
    • KC5410 (2)
    • KC710 (2)
    • KC720 (2)
    • KC722 (2)
    • KC730 (2)
    • KC810 (2)
    • KC850 (2)
    • KC910 (1)
    • KC9110 (2)
    • KC9320 (2)
    • KC935 (2)
    • KC950 (2)
    • KCK20 (1)
    • KCK20B (2)
    • KCP10B (2)
    • KCP25B (2)
    • KCU10 (2)
    • KCU10B (2)
    • KCU25 (2)
    • KCU25B (2)
    • KT175 (2)
    • KT315 (2)
    • KU10T (2)
    • KU25T (2)
    • KU30T (2)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(2)
    • 0.031 in(2)
    • 0.035 in(2)
    • 0.039 in(2)
    • 0.041 in(2)
    • 0.047 in(2)
    • 0.055 in(2)
    • 0.058 in(2)
    • 0.06 in(2)
    • 0.062 in(2)
    • 0.067 in(2)
    • 0.069 in(2)
    • 0.077 in(2)
    • 0.079 in(2)
    • 0.088 in(2)
    • 0.089 in(2)
    • 0.095 in(2)
    • 0.098 in(2)
    • 0.108 in(2)
    • 0.119 in(2)
    • 0.125 in(2)
    • 0.126 in(2)
    • 0.128 in(2)
    • 0.129 in(2)
    • 0.138 in(2)
    • 0.147 in(1)
    • 0.15 in(1)
    • 0.151 in(1)
    • 0.152 in(2)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(2)
    • 0.775 mm(2)
    • 0.8 mm(2)
    • 0.9 mm(2)
    • 1.0 mm(2)
    • 1.05 mm(2)
    • 1.201 mm(2)
    • 1.401 mm(2)
    • 1.475 mm(2)
    • 1.5 mm(2)
    • 1.576 mm(2)
    • 1.701 mm(2)
    • 1.75 mm(2)
    • 1.951 mm(2)
    • 2.0 mm(2)
    • 2.2 mm(2)
    • 2.225 mm(2)
    • 2.25 mm(2)
    • 2.401 mm(2)
    • 2.5 mm(2)
    • 2.75 mm(2)
    • 3.0 mm(2)
    • 3.176 mm(2)
    • 3.2 mm(2)
    • 3.25 mm(2)
    • 3.276 mm(2)
    • 3.5 mm(2)
    • 3.725 mm(1)
    • 3.801 mm(1)
    • 3.825 mm(1)
    • 3.85 mm(2)
    Cutting Width MinaCutting Width Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H T (2)
    • H W (2)
    No filters matching ""

    NE-CA

    (2)NE-CA
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?