Kendex™ • Fixação de estilo C • Para insertos de estilo Kendex
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (75)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(70)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(70)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(70)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(75)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(75)
- M Stainless Steel (70)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(70)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(70)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(70)
- K Cast Iron (94)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(94)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(89)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(86)
- N Non-Ferrous Materials (86)
- N1Wrought Aluminum (75)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(75)
- N3High-Silicon Aluminum Alloys Si >12.2%(52)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (86)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (75)
- N6Carbon, Graphite Composites, CFRP (65)
- N7MMC's (73)
- S High-Temp Alloys (94)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(94)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(94)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(94)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(86)
- H Hardened Materials (80)
- H1Hardened Materials 44-48 HRC(80)
- H2Hardened Materials 48-55 HRC(80)
- H3Hardened Materials 56-60 HRC(80)
- H4Hardened Materials >60 HRC(57)
- C CFRP Materials (75)
- C1CFRP, CFRP / CFRP (65)
- C2CFRP / Aluminium CFRP / Non-Ferrous (73)
Applications
Applications
Facing (95)
Multiple Direction Cutting (33)
Profiling (26)
TRN Boring (7)
Turning (101)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (82)
- Lightly Interrupted Cut (92)
- Smooth Cut (92)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (14)
- 60.0 (3)
- 75.0 (14)
- 90.0 (61)
- 95.0 (11)
a
Connection Style
Connection Style
- KM (13)
- Toolholder (83)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (55)
- 2.0 (21)
- 3.0 (47)
- 4.0 (27)
- 6.0 (2)
- 8.0 (13)
a
Over All Length [L]
Over All Length [L]
- 1.969 in(4)
- 2.362 in(16)
- 3.15 in(2)
- 3.5 in(2)
- 3.938 in(1)
- 4.0 in(1)
- 4.5 in(13)
- 4.921 in(3)
- 5.0 in(8)
- 5.906 in(9)
- 6.0 in(38)
- 7.0 in(2)
- 8.0 in(4)
a
Over All Length [L]
Over All Length [L]
- 50.0 mm(4)
- 60.0 mm(16)
- 80.0 mm(2)
- 88.9 mm(2)
- 100.0 mm(1)
- 101.601 mm(1)
- 114.301 mm(13)
- 125.0 mm(3)
- 127.0 mm(8)
- 150.0 mm(9)
- 152.4 mm(38)
- 177.8 mm(2)
- 203.201 mm(4)
a
Corner Radius
Corner Radius
- 0.004 in(60)
- 0.008 in(50)
- 0.016 in(75)
- 0.031 in(85)
- 0.047 in(85)
- 0.063 in(71)
- 0.094 in(3)
- 0.095 in(22)
- 0.126 in(27)
- 0.188 in(3)
- 0.25 in(10)
a
Corner Radius
Corner Radius
- 0.1 mm(60)
- 0.2 mm(50)
- 0.4 mm(75)
- 0.8 mm(85)
- 1.201 mm(85)
- 1.6 mm(71)
- 2.375 mm(3)
- 2.401 mm(22)
- 3.2 mm(27)
- 4.775 mm(3)
- 6.351 mm(10)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (41)
- AC5 (37)
- CG4 (33)
- CM2 (42)
- CM3 (64)
- CM4 (20)
- CM5 (41)
- CW2015 (15)
- CW3020 (13)
- CW5025 (15)
- GX (60)
- K060 (31)
- K090 (88)
- K1 (55)
- K11 (25)
- K21 (74)
- K2884 (13)
- K2885 (52)
- K313 (75)
- K420 (65)
- K45 (64)
- K6 (66)
- K68 (85)
- K8735 (20)
- KB1340 (18)
- KB1630 (39)
- KB5630 (3)
- KB9610 (20)
- KB9640 (19)
- KBK35 (15)
- KBK45 (9)
- KC210 (61)
- KC250 (59)
- KC5010 (65)
- KC710 (64)
- KC720 (55)
- KC730 (70)
- KC7310 (47)
- KC732 (65)
- KC735M (19)
- KC740 (20)
- KC8050 (65)
- KC810 (76)
- KC850 (82)
- KC9010 (8)
- KC9025 (67)
- KC910 (84)
- KC9110 (66)
- KC9120 (56)
- KC9315 (64)
- KC935 (62)
- KC950 (76)
- KC990 (72)
- KCD25 (46)
- KCK15B (47)
- KCP10B (20)
- KCP25B (64)
- KCP25C (61)
- KCU10 (65)
- KCU10B (65)
- KD050 (28)
- KD081 (20)
- KD100 (69)
- KD120 (67)
- KD1405 (34)
- KD1425 (52)
- KD200 (9)
- KD230 (9)
- KD240 (9)
- KM1 (61)
- KMF (20)
- KT125 (64)
- KT150 (42)
- KT175 (20)
- KY1310 (69)
- KY1320 (16)
- KY1525 (17)
- KY1540 (39)
- KY1615 (91)
- KY2000 (61)
- KY2100 (14)
- KY2200 (3)
- KY3000 (56)
- KY3400 (16)
- KY3500 (38)
- KY4000 (23)
- KY4300 (58)
- KY4400 (64)
- KYHK15B (59)
- KYK10 (53)
- KYK25 (16)
- KYK35 (36)
- KYS25 (16)
- KYS30 (16)
- MC2 (49)
- MC3 (5)
- P10 (28)
- P20 (20)
- P25 (44)
- P2F (52)
- SF30 (19)
- SP0A00 (23)
- SP4200 (20)
- TN7010 (3)
- TN7015 (3)
- TN7035 (13)
- TN7110 (3)
- TTX (33)
- WBK40U (9)
- WK20CT (3)
- YY87EL (20)
- YYMITA (1)
Hand Of Tool
Hand Of Tool
- L (31)
- N (16)
- R (49)
Wiper Insert
Wiper Insert
- N (101)
F Dimension
F Dimension
- 0.0 mm(1)
- 7.926 mm(1)
- 9.525 mm(1)
- 9.951 mm(1)
- 10.0 mm(1)
- 11.675 mm(1)
- 12.5 mm(1)
- 12.701 mm(4)
- 13.775 mm(1)
- 14.425 mm(1)
- 15.5 mm(1)
- 15.875 mm(1)
- 16.0 mm(2)
- 17.0 mm(1)
- 17.776 mm(1)
- 19.05 mm(5)
- 19.175 mm(1)
- 19.875 mm(3)
- 20.0 mm(1)
- 20.175 mm(1)
- 25.0 mm(1)
- 25.401 mm(7)
- 26.625 mm(2)
- 26.925 mm(2)
- 28.576 mm(4)
- 29.725 mm(4)
- 31.75 mm(22)
- 32.0 mm(4)
- 35.0 mm(2)
- 38.0 mm(6)
- 38.1 mm(7)
- 43.0 mm(4)
- 50.801 mm(1)
a
F Dimension
F Dimension
- 0.0 in(1)
- 0.312 in(1)
- 0.375 in(1)
- 0.392 in(1)
- 0.394 in(1)
- 0.46 in(1)
- 0.492 in(1)
- 0.5 in(4)
- 0.542 in(1)
- 0.569 in(1)
- 0.61 in(1)
- 0.625 in(1)
- 0.63 in(2)
- 0.669 in(1)
- 0.701 in(1)
- 0.75 in(5)
- 0.755 in(1)
- 0.782 in(3)
- 0.787 in(1)
- 0.794 in(1)
- 0.984 in(1)
- 1.0 in(7)
- 1.048 in(2)
- 1.06 in(2)
- 1.125 in(4)
- 1.17 in(4)
- 1.25 in(22)
- 1.26 in(4)
- 1.379 in(2)
- 1.496 in(6)
- 1.5 in(7)
- 1.693 in(4)
- 2.0 in(1)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 70.0 mm(2)
- 86.0 mm(5)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.757 in(2)
- 3.386 in(5)
a
Cutting Direction
Cutting Direction
- B (12)
- E (31)
- S (53)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (22)
- DOUBLE POSITIVE (18)
- NEGATIVE-ZERO (2)
- POSITIVE-ZERO (54)
Maximum Bore Depth
Maximum Bore Depth
- 1.969 in(2)
- 2.362 in(5)
a
Maximum Bore Depth
Maximum Bore Depth
- 50.0 mm(2)
- 60.0 mm(5)
a
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (14)
- R-ROUND (13)
- S-SQUARE 90 (25)
- T-TRIANGLE 60 (51)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.25 in(2)
- 1.381 in(5)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 31.75 mm(2)
- 35.051 mm(5)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (86)
- B L (28)
- C A (91)
- C N (94)
- D P (69)
- H T (64)
- H W (96)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (83)
- TAPER SHANK (13)
System Size
System Size
- KM50TS (2)
- KM63TS (11)
Back-End Diameter
Back-End Diameter
- 50.0 mm(4)
- 63.0 mm(16)
a
Back-End Diameter
Back-End Diameter
- 1.969 in(4)
- 2.48 in(16)
a
Shank Height
Shank Height
- 0.473 in(2)
- 0.5 in(4)
- 0.625 in(2)
- 0.63 in(1)
- 0.75 in(11)
- 0.787 in(3)
- 0.984 in(9)
- 1.0 in(35)
- 1.25 in(12)
- 1.5 in(4)
a
Shank Height
Shank Height
- 12.0 mm(2)
- 12.701 mm(4)
- 15.875 mm(2)
- 16.0 mm(1)
- 19.05 mm(11)
- 20.0 mm(3)
- 25.0 mm(9)
- 25.401 mm(35)
- 31.75 mm(12)
- 38.1 mm(4)
a
Shank Width
Shank Width
- 0.394 in(1)
- 0.473 in(2)
- 0.5 in(5)
- 0.551 in(1)
- 0.625 in(2)
- 0.63 in(1)
- 0.709 in(1)
- 0.75 in(13)
- 0.787 in(4)
- 0.984 in(5)
- 1.0 in(40)
- 1.25 in(7)
- 1.5 in(1)
a
Shank Width
Shank Width
- 10.0 mm(1)
- 12.0 mm(2)
- 12.701 mm(5)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(1)
- 18.0 mm(1)
- 19.05 mm(13)
- 20.0 mm(4)
- 25.0 mm(5)
- 25.401 mm(40)
- 31.75 mm(7)
- 38.1 mm(1)
a
No filters matching ""
