Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Kennametal à votre service

Call (833) 893-0249

Support Clients

Trouver les coordonnées des supports clients dans le monde

Commande rapide
Article(s) ajoutées avec succès au panier
Voir le panier

Kennametal à votre service

Call (833) 893-0249

Support Clients

Trouver les coordonnées des supports clients dans le monde

Article(s) ajoutées avec succès au panier
Voir le panier
Exit Search Retour à la Solution

Édition de la Solution

Ajout de Solution

Nom de la Solution:{{SolutionName}}

    Produit similaire à:

    Retour | Modifier similaire à

    DFSP Flanged Shank • Right Hand • 5 x D

    Drill Fix™ DFSP™ Bodies

    Numéro de matériel100030852

    DFSP Flanged Shank • Right Hand • 5 x D
    DFSP Flanged Shank • Right Hand • 5 x D
    DFSP Flanged Shank • Right Hand • 5 x D
    Open expanded view
    DFSP Flanged Shank • Right Hand • 5 x D
    DFSP Flanged Shank • Right Hand • 5 x D
    Représentation Générique
    Contactez notre équipe commerciale pour découvrir toutes vos options tarifaires

    Features and benefits

    • DFSP combines the economical squared outboard insert with the superior centering capabilities of the trigon inboard insert.
    • Drill shipped with insert screws, side pipe plug, and Torx wrench.
    • Order inserts for DFSP separately. See pages [REFERENCE] for inserts.
    • PerçagePerçage
    • Perçage : Entrée inclinéePerçage : Entrée inclinée
    • Perçage : Sortie inclinéePerçage : Sortie inclinée
    • Perçage : Trou excentréPerçage : Trou excentré
    • Perçage : ConvexePerçage : Convexe
    • Queue — cylindrique avec plat et brideQueue — cylindrique avec plat et bride
    • Arrosage interne : Radial : Perçage indexable Arrosage interne : Radial : Perçage indexable
    • Perçage : trou borgnePerçage : trou borgne
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    ATTENTION • Drill Fix DFR

    ATTENTION En perçage débouchant, une rondelle (ou débouchure) se forme au moment où l’outil débouche de la pièce. Lorsque le foret est fixe et que la pièce tourne, la rondelle risque d’être éjectée du mandrin sous l’effet de la force centrifuge. Prévoir une protection pour les personnes se trouvant à proximité.
    product data image 42415
    DLSCFCSbouchon fileté
    0.7502.001/8-27 NPTR 1/8-27 NPT1025612
    1.0003.001/8-27 NPTR 1/4-18 NPT1025612
    1.2503.251/8-27 NPTR 1/4-18 NPT1025612
    1.5003.751/8-27 NPTR 1/4-18 NPT1025612
    2.0004.001/8-27 NPTR 1/4-18 NPT1025612
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    P1SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    2SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    3SOMDKCPK108539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    4SOFPKCPK10722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU25492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    5SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    6SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    P1SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    1SIMDKC7140101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    1UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1UIMDKC7140656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIMDKC7140426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    2SIMDKC7140101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    2UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2UIMDKC7140656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIMDKC7140426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOMDKCPK108539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    3SIMDKC71408539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    3UOFPKCU25590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3UIMDKC7140590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IOHPKCU40361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIMDKC7140361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4SOFPKCPK10722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    4SIMDKC7140722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    4UOHPKCU25492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4UIMDKC7140492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IOHPKCU40295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IIMDKC7140295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    5SIMDKC7140590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    5UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5UIMDKC7140394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IIMDKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    6SIMDKC7140590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    6UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6UIMDKC7140394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6IIMDKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    M1SOFPKCU25492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IMDKC7140
    UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IMDKC7140
    IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    2SOFPKCU25492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IMDKC7140
    UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IMDKC7140
    IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    3SOHPKCU25328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    UOHPKCU40262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IHPKC7140
    IOMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    M1SOFPKCU25492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1SIMDKC7140492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    1UIMDKC7140328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    1IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    1IIMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    2SOFPKCU25492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2SIMDKC7140492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    2UIMDKC7140328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    2IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    2IIMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    3SOHPKCU25328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3SIHPKC7140328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UOHPKCU40262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    3UIHPKC7140262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    3IOMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    3IIMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    K1SOFPKCPK10656787984SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOFPKCU25394508656SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOFPKC7140262328410SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    2SOFPKCPK10590722853SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOHPKCU25361459558SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKC7140262328394SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    3SOHPKCPK10590722853SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOHPKCU25361459558SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKC7140262328394SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    K1SOFPKCPK10656787984sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1SIHPKCU40656787984sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1UOFPKCU25394508656sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UIHPKC7140394508656sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1IOFPKC7140262328410sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIHPKC7140262328410sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOFPKCPK10590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2SIHPKCU40590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2UOHPKCU25361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UIHPKC7140361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2IOHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOHPKCPK10590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3SIHPKCU40590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3UOHPKCU25361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UIHPKC7140361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3IOHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    N1SOHPKCPK10114816402132SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4098413121640SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    2SOHPKCPK1098413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU405748201066SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    3SOHPKCPK1098413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU404928201148SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    4SOHPKCU2598413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKC7140
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    5SOHPKCU40131214761640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    N1SOHPKCPK10114816402132sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1SIHPKMF114816402132sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1UOHPKCU4098413121640sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UIHPKMF98413121640sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIHPKMF6569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOHPKCPK1098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2SIHPKMF98413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2IOHPKCU405748201066sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIHPKMF5748201066sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOHPKCPK1098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3SIHPKMF98413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3IOHPKCU404928201148sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIHPKMF4928201148sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4SOHPKCU2598413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    4SIHPKC714098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    4UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    4UIHPKC714082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    4IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IIHPKC71406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5SOHPKCU40131214761640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    5SIHPKMF131214761640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    5UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    5UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    5IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IIHPKMF6569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    S1SOHPKCU40197230246SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40131164197SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU408298131SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    2SOHPKCU40164197230SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU408298131SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    3SOHPKCU40230262295SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40164197230SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    4SOHPKCU40230262295SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40164197230SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    S1SOHPKCU40197230246sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    1SIMDKC7140197230246sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    1UOHPKCU40131164197sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1UIMDKC7140131164197sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1IOHPKCU408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1IIMDKC71408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2SOHPKCU40164197230sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    2SIMDKC7140164197230sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    2UOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2UIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2IOHPKCU408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2IIMDKC71408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3SOHPKCU40230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    3SIMDKC7140230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    3UOHPKCU40164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3UIMDKC7140164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3IOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3IIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4SOHPKCU40230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    4SIMDKC7140230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    4UOHPKCU40164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4UIMDKC7140164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4IOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4IIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    Vous êtes sur le point d’ajouter à votre page mes solutions. Souhaitez-vous continuer ?
    Select the destination where you want to move à.
    Nouvelle Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Veuillez saisir un nom valide
    product-image
    Please adjust the following properties from

    catalogue ISO

    catalogue ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Vous devez être connecté pour voir les informations de votre tableau de bord
    Session expired due to inactivity, please login again
    Le(s) produit(s) () que vous essayez d’ajouter au panier est/sont indisponible(s), veuillez Contacter le service client.
    article(s) ajouté(s) avec succès au panier
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number catalogue ISO Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk