Produit similaire à:
KDM • Shell Mills • RD.X16... • Inch
Indexable Shell Mills • RD.1604.. Inserts
Numéro de matériel2251773
Ref. ISO CatalogueKDM600RD16S150Ref. ANSI CatalogueKDM600RD16S150F
- P Acier
- M Acier inoxydable
- K Fonte
- N Non ferreux
- S Alliages hautes températures
- H Matériaux trempés
Fraisage hélicoïdal
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Fraisage — 3 tailles
Usinage de poches
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Aperçu
- Données d'application
- Téléchargements
- Pièces compatibles côté machine
- Pièces compatibles côté pièce
- Pièces de rechange
- Révision
- FAQ
Numéro de matériel | 2251773 |
Ref. ISO Catalogue | KDM600RD16S150 |
Ref. ANSI Catalogue | KDM600RD16S150F |
[D1MAX] Diamètre de coupe maximal | 152.4 mm |
[D1MAX] Diamètre de coupe maximal | 6 in |
[D1] Diamètre effectif de coupe | 136.398 mm |
[D1] Diamètre effectif de coupe | 5.37 in |
[D] Adaptateur / Queue / Diamètre d’alésage | 38.1 mm |
[D] Adaptateur / Queue / Diamètre d’alésage | 1.5 in |
[D6] Diamètre du moyeu | 93.726 mm |
[D6] Diamètre du moyeu | 3.69 in |
[L] Longueur totale | 55.118 mm |
[L] Longueur totale | 2.17 in |
[AP1MAX] 1re profondeur de coupe maximale | 8 mm |
[AP1MAX] 1re profondeur de coupe maximale | .315 in |
Nombre de plaquettes | 9 |
Plaquette étalon | RD.X1604. |
Poids Livres | 9.92 |
Matériaux de pièce à usiner
- Acier
- Acier inoxydable
- Fonte
- Non ferreux
- Alliages hautes températures
- Matériaux trempés
Uses and application
Fraisage hélicoïdal
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Fraisage — 3 tailles
Usinage de poches
Features and benefits
- Engineered for maximum performance.
- High runout accuracy.
- Suitable for die and mold manufacturing.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
Guide de sélection des plaquettes
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .F..LP | KC725M | .S..GN | KC725M | .S..HP | KC725M |
P3–P4 | .S..HP | KC522M | .S..HP | KCPK30 | .S..HN | KC725M |
P5–P6 | .S..HP | KC522M | .S..HP | KCPM20 | .S..HN | KCPM20 |
M1–M2 | – | – | .S..HP | KC725M | – | – |
M3 | – | – | .S..HP | KC725M | – | – |
K1–K2 | .S..HN | KC510M | .S..HP | KCPK30 | .S..HP | KCPK30 |
K3 | .S..HN | KC510M | .S..HP | KCPK30 | .S..HP | KCPK30 |
N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
S1–S2 | – | – | .S..HP | KC725M | – | – |
S3 | – | – | .S..HP | KC725M | – | – |
S4 | – | – | .S..HP | KC725M | – | – |
H1 | .S..GN | KC510M | .S..HN | KC510M | .S..HN | KCPM20 |
Feeds
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | 0,05 | 0,10 | 0,20 | .F..LP |
.S..GN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..GN |
.S..HP | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..HP |
.S..HN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..HN |
Light | General | Heavy |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,10 | 0,19 | 0,39 | 0,07 | 0,14 | 0,29 | 0,06 | 0,13 | 0,25 | 0,06 | 0,12 | 0,24 | 0,06 | 0,12 | 0,23 | .F..LP |
.S..GN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..GN |
.S..HP | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..HP |
.S..HN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..HN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,13 | 0,25 | 0,51 | 0,10 | 0,19 | 0,38 | 0,08 | 0,17 | 0,33 | 0,08 | 0,15 | 0,31 | 0,08 | 0,15 | 0,30 | .F..LP |
.S..GN | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..GN |
.S..HP | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..HP |
.S..HN | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..HN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,18 | 0,35 | 0,69 | 0,13 | 0,26 | 0,52 | 0,11 | 0,23 | 0,45 | 0,11 | 0,21 | 0,42 | 0,10 | 0,21 | 0,41 | .F..LP |
.S..GN | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..GN |
.S..HP | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..HP |
.S..HN | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..HN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .003 | .007 | .014 | .003 | .005 | .010 | .002 | .004 | .009 | .002 | .004 | .008 | .002 | .004 | .008 | .F..LP |
.S..GN | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..GN |
.S..HP | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..HP |
.S..HN | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..HN |
Light | General | Heavy |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .004 | .008 | .016 | .003 | .006 | .012 | .003 | .005 | .010 | .002 | .005 | .009 | .002 | .005 | .009 | .F..LP |
.S..GN | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..GN |
.S..HP | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..HP |
.S..HN | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..HN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .007 | .014 | .028 | .005 | .010 | .021 | .005 | .009 | .018 | .004 | .008 | .017 | .004 | .008 | .017 | .F..LP |
.S..GN | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..GN |
.S..HP | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..HP |
.S..HN | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..HN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .005 | .010 | .021 | .004 | .008 | .015 | .003 | .007 | .013 | .003 | .006 | .012 | .003 | .006 | .012 | .F..LP |
.S..GN | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..GN |
.S..HP | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..HP |
.S..HN | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..HN |
Speeds
Vitesses de départ recommandées [m/mn]
Material Group | KC510M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 |
2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | |
3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | |
4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | |
5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | |
6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | – | |
M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 |
2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | |
3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | |
K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 355 | 320 | 285 |
2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 280 | 255 | 230 | |
3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 235 | 210 | 195 | |
N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | KC510M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | |
5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | |
6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | |
M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 |
2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | |
3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | |
K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 920 | 830 | 760 | |
3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 770 | 690 | 640 | |
N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use