Ramping : Ébauche
Rainurage : Bout hémisphérique
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Fraisage — Arrosage interne
Fraisage — 3 tailles
Usinage de pochesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 4178124 |
| Ref. ISO Catalogue | KDR200R1205S075L200 |
| Ref. ANSI Catalogue | KDR200R1205S075L200 |
| [D1MAX] Diamètre de coupe maximal | 50.8 mm |
| [D1MAX] Diamètre de coupe maximal | 2 in |
| [D1] Diamètre effectif de coupe | 38.8 mm |
| [D1] Diamètre effectif de coupe | 1.528 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 19.05 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .75 in |
| [D6] Diamètre du moyeu | 44.45 mm |
| [D6] Diamètre du moyeu | 1.75 in |
| [L] Longueur totale | 50.8 mm |
| [L] Longueur totale | 2 in |
| [AP1MAX] 1re profondeur de coupe maximale | 3 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .117 in |
| Nombre de plaquettes | 5 |
| Angle de ramping maximum | 0.4 |
| T/Min max | 31080 |
| Plaquette étalon | RN_J1204M0__ |
| Poids Livres | 0.96 |
Ramping : ÉbaucheRainurage : Bout hémisphériqueFraisage de côté/avec épaulement : Bout hémisphériqueProfilage 3DFraisage — Arrosage interneFraisage — 3 taillesUsinage de pochesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Groupe Matières | Travaux légers | Applications générales | Travaux lourds | |||
| – | (géomètrie légère) | – | (géomètrie solide) | |||
| – | résistance à l’usure |  | ténacité | |||
| – | Géométrie | Nuance | Géométrie | Nuance | Géométrie | Nuance |
| P1–P2 | .E..LD | KCPK30 | .S..GD | KCPM40 | .S..HD | KCPM40 |
| P3–P4 | .E..LD | KCPK30 | .S..GD | KCPK30 | .S..HD | KCPM40 |
| P5–P6 | .E..LD | KC725M | .S..GD | KC725M | .S..HD | KC725M |
| M1–M2 | .E..LD | KC522M | .S..GDJ | KCSM40 | .S..HD | KC725M |
| M3 | .S..GD | KCPM40 | .S..GDJ | KCSM40 | .S..HD | KCPM40 |
| K1–K2 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD | KCK15 |
| K3 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD | KCK15 |
| N1–N2 | .F..LDJ | KC422M | .F..LDJ | KC422M | .S..GD | KC510M |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..LD | KC725M | .S..GD | KC725M | .S..HD | KC725M |
| S3 | .S..GD | KCPM40 | .S..GDJ | KCSM40 | .S..HD | KCPM40 |
| S4 | .S..GD | KC522M | .S..GDJ | KCSM40 | .S..HD | KC725M |
| H1 | .S..GD | KC510M | .S..GD | KC510M | – | – |
| Travaux légers | Applications générales | Travaux lourds |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | .005 | .016 | .030 | .004 | .011 | .021 | .003 | .008 | .016 | .002 | .007 | .014 | .002 | .007 | .013 | .F..LDJ |
| .E..LDJ | .005 | .017 | .032 | .004 | .013 | .023 | .003 | .009 | .017 | .002 | .008 | .015 | .002 | .008 | .014 | .E..LDJ |
| .E..LD | .005 | .017 | .032 | .004 | .013 | .023 | .003 | .009 | .017 | .002 | .008 | .015 | .002 | .008 | .014 | .E..LD |
| .S..GDJ | .009 | .023 | .035 | .007 | .017 | .025 | .005 | .013 | .019 | .004 | .011 | .016 | .004 | .010 | .015 | .S..GDJ |
| .S..GD | .009 | .023 | .035 | .007 | .017 | .025 | .005 | .013 | .019 | .004 | .011 | .016 | .004 | .010 | .015 | .S..GD |
| .S..HD | .009 | .023 | .035 | .007 | .017 | .025 | .005 | .013 | .019 | .004 | .011 | .016 | .004 | .010 | .015 | .S..HD |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | .007 | .021 | .040 | .005 | .015 | .029 | .004 | .011 | .021 | .003 | .010 | .019 | .003 | .009 | .017 | .F..LDJ |
| .E..LDJ | .007 | .023 | .043 | .005 | .017 | .030 | .004 | .013 | .023 | .003 | .011 | .020 | .003 | .010 | .018 | .E..LDJ |
| .E..LD | .007 | .023 | .043 | .005 | .017 | .030 | .004 | .013 | .023 | .003 | .011 | .020 | .003 | .010 | .018 | .E..LD |
| .S..GDJ | .012 | .031 | .048 | .009 | .022 | .034 | .007 | .017 | .025 | .006 | .015 | .022 | .005 | .013 | .020 | .S..GDJ |
| .S..GD | .012 | .031 | .048 | .009 | .022 | .034 | .007 | .017 | .025 | .006 | .015 | .022 | .005 | .013 | .020 | .S..GD |
| .S..HD | .012 | .031 | .048 | .009 | .022 | .034 | .007 | .017 | .025 | .006 | .015 | .022 | .005 | .013 | .020 | .S..HD |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | .010 | .033 | .063 | .007 | .023 | .044 | .005 | .017 | .033 | .005 | .015 | .029 | .004 | .014 | .026 | .F..LDJ |
| .E..LDJ | .010 | .036 | .067 | .007 | .026 | .047 | .005 | .019 | .035 | .005 | .017 | .030 | .004 | .015 | .028 | .E..LDJ |
| .E..LD | .010 | .036 | .067 | .007 | .026 | .047 | .005 | .019 | .035 | .005 | .017 | .030 | .004 | .015 | .028 | .E..LD |
| .S..GDJ | .019 | .049 | .075 | .014 | .035 | .052 | .010 | .026 | .039 | .009 | .022 | .034 | .008 | .021 | .031 | .S..GDJ |
| .S..GD | .019 | .049 | .075 | .014 | .035 | .052 | .010 | .026 | .039 | .009 | .022 | .034 | .008 | .021 | .031 | .S..GD |
| .S..HD | .019 | .049 | .075 | .014 | .035 | .052 | .010 | .026 | .039 | .009 | .022 | .034 | .008 | .021 | .031 | .S..HD |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | .008 | .026 | .049 | .006 | .018 | .035 | .004 | .014 | .026 | .004 | .012 | .023 | .003 | .011 | .021 | .F..LDJ |
| .E..LDJ | .008 | .029 | .052 | .006 | .020 | .037 | .004 | .015 | .028 | .004 | .013 | .024 | .003 | .012 | .022 | .E..LDJ |
| .E..LD | .008 | .029 | .052 | .006 | .020 | .037 | .004 | .015 | .028 | .004 | .013 | .024 | .003 | .012 | .022 | .E..LD |
| .S..GDJ | .015 | .038 | .059 | .011 | .027 | .041 | .008 | .020 | .031 | .007 | .018 | .027 | .007 | .016 | .024 | .S..GDJ |
| .S..GD | .015 | .038 | .059 | .011 | .027 | .041 | .008 | .020 | .031 | .007 | .018 | .027 | .007 | .016 | .024 | .S..GD |
| .S..HD | .015 | .038 | .059 | .011 | .027 | .041 | .008 | .020 | .031 | .007 | .018 | .027 | .007 | .016 | .024 | .S..HD |
| Groupe Matières | KC422M | KC510M | KCK15 | KC520M | KCPM20 | KC522M | KC725M | KCPK30 | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 2170 | 1910 | 1760 | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1340 | 1210 | 1090 | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 1210 | 1090 | 1000 | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 960 | 780 | 660 | – | – | – | – | – | – | 910 | 840 | 760 | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 1090 | 980 | 900 | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 760 | 660 | 570 | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | 0 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 880 | 790 | 680 | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 800 | 700 | 620 | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 640 | 570 | 490 | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 1150 | 1040 | 940 | 1660 | 1510 | 1340 | 1060 | 960 | 850 | 1420 | 1280 | 1150 | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 910 | 820 | 760 | 1310 | 1170 | 1090 | 830 | 740 | 700 | 1130 | 1010 | 920 | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 770 | 680 | 620 | 1100 | 980 | 900 | 700 | 620 | 560 | 950 | 840 | 780 | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
| N | 1 | 4220 | 3720 | 3440 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 3720 | 3440 | 3000 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 630 | 510 | 360 | – | – | – | – | – | – | 550 | 460 | 370 | 470 | 360 | 280 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Réf. catalogue | angle de ramping maxi | profondeur de plongée maxi | diamètre mini d'alésage (DH mini) | diamètre maxi pour fond plat | diamètre maxi pour fond plat |
| 32E03R045M16RP12 | 6,0° | 1,65 | 43,95 | 52 | 64 |
| 40E04R045M16RP12 | 9,0° | 3,50 | 57,24 | 68 | 80 |
| 32A03R040B32RP12 | 6,0° | 1,65 | 43,95 | 52 | 64 |
| 32A03R040A32RP12L190 | 6,0° | 1,65 | 43,95 | 52 | 64 |
| 40A04RS90RP12 | 9,0° | 3,50 | 57,24 | 68 | 80 |
| 50A04RS90RP12 | 10,8° | 6,00 | 76,04 | 88 | 100 |
| 50A05RS90RP12 | 7,9° | 4,40 | 76,50 | 88 | 100 |
| 52A05RS90RP12 | 10,2° | 6,00 | 80,05 | 92 | 104 |
| 63A05RS90RP12 | 7,7° | 6,00 | 102,02 | 114 | 126 |
| 63A07RS90RP12 | 2.6° | 2,10 | 105,08 | 114 | 126 |
| 66A06RS90RP12 | 6,6° | 5,50 | 108,14 | 120 | 132 |
| 80A06RS90RP12 | 5,1° | 5,50 | 136,04 | 148 | 160 |
| 80A08RS90RP12 | 4,1° | 4,40 | 136,58 | 148 | 160 |
| 100B07RS90RP12 | 4,0° | 5,70 | 176,04 | 188 | 200 |
| 100B09RS90RP12 | 3,1° | 4,40 | 176,55 | 188 | 200 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?