Produit similaire à:
RPMT10-41-X4 • 4 index • Pour la finition dans l'acier allié et la fonte
Plaquettes indexables
Numéro de matériel5666394
Ref. ISO CatalogueRPMT10T3M0E41X4Ref. ANSI CatalogueRPMT10T3M0E41X4
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Numéro de matériel | 5666394 |
Ref. ISO Catalogue | RPMT10T3M0E41X4 |
Ref. ANSI Catalogue | RPMT10T3M0E41X4 |
Nuance | MP91M |
[D] Taille de plaquette CI | 10 mm |
[D] Taille de plaquette CI | .394 in |
[S] Épaisseur de la plaquette | 3.97 mm |
[S] Épaisseur de la plaquette | .156 in |
Épaisseur moyenne du copeau [HM] | 0.04 mm |
Épaisseur moyenne du copeau [HM] | .002 in |
Insérer le nombre d’index | 4 |
Features and benefits
- Premier choix pour la finition dans les aciers alliés et la fonte.
- Quatre positions d'indexage :
— Ap maxi : 5mm [.196″]
— Ap recommandée : ≤2,5mm [.098″]
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
P3–P4 | 422-X8 | SP6519 | 432-X5 | SP6519 | 422-X4 | SP6519 |
P5–P6 | 422-X8 | SP6519 | T-X4 | SP6519 | T-X4 | X500 |
M1–M2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
M3 | 422-X8 | X700 | 432-X5 | SP6519 | 422-X4 | X500 |
K1–K2 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
K3 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
N1–N2 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
N3 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
S1–S2 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
S3 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
S4 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
H1 | – | – | – | – | – | – |
Feeds
À une profondeur de coupe axiale (ap) de 5,00
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,12 | 0,19 | 0,26 | 0,08 | 0,13 | 0,18 | 0,06 | 0,10 | 0,14 | 0,05 | 0,09 | 0,12 | 0,05 | 0,08 | 0,11 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
422–X4 | 0,12 | 0,29 | 0,57 | 0,08 | 0,21 | 0,40 | 0,06 | 0,16 | 0,30 | 0,05 | 0,14 | 0,26 | 0,05 | 0,13 | 0,24 | 422–X4 |
T–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | T–X4 |
À une profondeur de coupe axiale (ap) de 2,50
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,13 | 0,21 | 0,30 | 0,10 | 0,15 | 0,21 | 0,07 | 0,12 | 0,16 | 0,06 | 0,10 | 0,14 | 0,06 | 0,09 | 0,13 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 432–X5 |
422–X4 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 422–X4 |
T–X4 | 0,27 | 0,48 | 0,77 | 0,19 | 0,34 | 0,55 | 0,14 | 0,25 | 0,41 | 0,13 | 0,22 | 0,35 | 0,12 | 0,20 | 0,32 | T–X4 |
À une profondeur de coupe axiale (ap) de 2,00
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,16 | 0,26 | 0,36 | 0,12 | 0,19 | 0,26 | 0,09 | 0,14 | 0,19 | 0,08 | 0,12 | 0,17 | 0,07 | 0,11 | 0,15 | 701–X4 |
422–X8 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X8 |
432–X5 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 432–X5 |
422–X4 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X4 |
T–X4 | 0,33 | 0,58 | 0,94 | 0,23 | 0,42 | 0,67 | 0,18 | 0,31 | 0,49 | 0,15 | 0,27 | 0,43 | 0,14 | 0,25 | 0,39 | T–X4 |
À une profondeur de coupe axiale (ap) de 1,50
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,14 | 0,23 | 0,32 | 0,10 | 0,17 | 0,23 | 0,08 | 0,13 | 0,17 | 0,07 | 0,11 | 0,15 | 0,06 | 0,10 | 0,14 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 432–X5 |
422–X4 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 422–X4 |
T–X4 | 0,29 | 0,52 | 0,84 | 0,21 | 0,37 | 0,59 | 0,16 | 0,28 | 0,44 | 0,14 | 0,24 | 0,38 | 0,13 | 0,22 | 0,35 | T–X4 |
Light | General | Heavy |
At .197 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .005 | .009 | .013 | .003 | .007 | .009 | .002 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
422–X4 | .005 | .012 | .023 | .003 | .008 | .016 | .002 | .006 | .012 | .002 | .006 | .010 | .002 | .005 | .010 | 422–X4 |
T–X4 | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .011 | T–X4 |
At .098 Axial Depth of Cut (ap)
Light | General | Heavy |
At .079 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .005 | .011 | .015 | .004 | .008 | .011 | .003 | .006 | .008 | .002 | .005 | .007 | .002 | .005 | .006 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 432–X5 |
422–X4 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 422–X4 |
T–X4 | .011 | .018 | .029 | .008 | .013 | .020 | .006 | .010 | .015 | .005 | .008 | .013 | .005 | .008 | .012 | T–X4 |
At .059 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
– | 5% | 10% | 20% | 30% | 40–100% | |||||||||||
701–X4 | .006 | .013 | .018 | .005 | .009 | .013 | .003 | .007 | .010 | .003 | .006 | .008 | .003 | .006 | .008 | 701–X4 |
422–X8 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X8 |
432–X5 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 432–X5 |
422–X4 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X4 |
T–X4 | .013 | .022 | .035 | .009 | .016 | .025 | .007 | .012 | .018 | .006 | .010 | .016 | .006 | .009 | .015 | T–X4 |
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .006 | .012 | .016 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 432–X5 |
422–X4 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 422–X4 |
T–X4 | .011 | .019 | .031 | .008 | .014 | .022 | .006 | .010 | .016 | .005 | .009 | .014 | .005 | .008 | .013 | T–X4 |
Speeds
Vitesses de départ recommandées [m/min]
Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
P | 1 | – | – | – | – | – | – | 130 | 213 | 295 | 140 | 228 | 315 | 130 | 200 | 270 | 140 | 243 | 345 | 140 | 255 | 370 |
2 | – | – | – | – | – | – | 115 | 188 | 260 | 120 | 198 | 275 | 115 | 178 | 240 | 120 | 213 | 305 | 120 | 223 | 325 | |
3 | – | – | – | – | – | – | 100 | 165 | 230 | 105 | 175 | 245 | 100 | 155 | 210 | 105 | 188 | 270 | 105 | 198 | 290 | |
4 | – | – | – | – | – | – | 75 | 125 | 175 | 80 | 135 | 190 | 75 | 118 | 160 | 80 | 143 | 205 | 80 | 145 | 210 | |
5 | – | – | – | 70 | 103 | 135 | 70 | 105 | 140 | 70 | 110 | 150 | 70 | 100 | 130 | – | – | – | 80 | 120 | 160 | |
6 | – | – | – | 50 | 83 | 115 | 50 | 85 | 120 | 50 | 90 | 130 | 50 | 80 | 110 | – | – | – | 60 | 100 | 140 | |
M | 1 | – | – | – | 115 | 188 | 260 | 115 | 193 | 270 | 120 | 200 | 280 | 115 | 183 | 250 | – | – | – | 120 | 205 | 290 |
2 | – | – | – | 105 | 168 | 230 | 105 | 170 | 235 | 110 | 180 | 250 | 100 | 160 | 220 | – | – | – | 110 | 185 | 260 | |
3 | – | – | – | 85 | 138 | 190 | 85 | 140 | 195 | 90 | 145 | 200 | 80 | 130 | 180 | – | – | – | 90 | 150 | 210 | |
K | 1 | 135 | 213 | 290 | – | – | – | 140 | 218 | 295 | 145 | 238 | 330 | 120 | 200 | 280 | 145 | 255 | 365 | 145 | 268 | 390 |
2 | 120 | 183 | 245 | – | – | – | 110 | 175 | 240 | 115 | 185 | 255 | 105 | 155 | 205 | 115 | 200 | 285 | 115 | 210 | 305 | |
3 | 115 | 158 | 200 | – | – | – | 100 | 160 | 220 | 105 | 170 | 235 | 95 | 133 | 170 | 105 | 183 | 260 | – | – | – | |
N | 1–2 | 400 | 1725 | 3050 | – | – | – | – | – | – | 400 | 1648 | 2895 | – | – | – | – | – | – | – | – | – |
3 | 295 | 1368 | 2440 | – | – | – | – | – | – | 295 | 1308 | 2320 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 23 | 38 | 52 | 23 | 39 | 55 | 24 | 44 | 63 | 23 | 36 | 48 | – | – | – | – | – | – |
2 | – | – | – | 22 | 34 | 46 | 22 | 35 | 48 | 23 | 38 | 52 | 21 | 33 | 44 | – | – | – | – | – | – | |
3 | – | – | – | 25 | 39 | 53 | 25 | 40 | 55 | 26 | 43 | 59 | 24 | 38 | 51 | – | – | – | – | – | – | |
4 | – | – | – | 36 | 56 | 75 | 36 | 58 | 79 | 37 | 61 | 84 | 35 | 54 | 73 | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | 50 | 75 | 100 | – | – | – | 50 | 78 | 105 | 50 | 80 | 110 |
Recommended Starting Speeds [SFM]
Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
P | 1 | – | – | – | – | – | – | 426 | 697 | 968 | 459 | 746 | 1033 | 426 | 656 | 886 | 459 | 795 | 1132 | 459 | 836 | 1214 |
2 | – | – | – | – | – | – | 377 | 615 | 853 | 394 | 648 | 902 | 377 | 582 | 787 | 394 | 697 | 1000 | 394 | 730 | 1066 | |
3 | – | – | – | – | – | – | 328 | 541 | 754 | 344 | 574 | 804 | 328 | 508 | 689 | 344 | 615 | 886 | 344 | 648 | 951 | |
4 | – | – | – | – | – | – | 246 | 410 | 574 | 262 | 443 | 623 | 246 | 385 | 525 | 262 | 467 | 672 | 262 | 476 | 689 | |
5 | – | – | – | 230 | 338 | 443 | 246 | 410 | 574 | 230 | 361 | 492 | 230 | 328 | 426 | – | – | – | 262 | 394 | 525 | |
6 | – | – | – | 164 | 272 | 377 | 230 | 344 | 459 | 164 | 295 | 426 | 164 | 262 | 361 | – | – | – | 197 | 328 | 459 | |
M | 1 | – | – | – | 377 | 615 | 853 | 377 | 631 | 886 | 394 | 656 | 918 | 377 | 599 | 820 | – | – | – | 394 | 672 | 951 |
2 | – | – | – | 344 | 549 | 754 | 344 | 558 | 771 | 361 | 590 | 820 | 328 | 525 | 722 | – | – | – | 361 | 607 | 853 | |
3 | – | – | – | 279 | 451 | 623 | 279 | 459 | 640 | 295 | 476 | 656 | 262 | 426 | 590 | – | – | – | 295 | 492 | 689 | |
K | 1 | 443 | 697 | 951 | – | – | – | 459 | 713 | 968 | 476 | 779 | 1082 | 394 | 656 | 918 | 476 | 836 | 1197 | 476 | 877 | 1279 |
2 | 394 | 599 | 804 | – | – | – | 361 | 574 | 787 | 377 | 607 | 836 | 344 | 508 | 672 | 377 | 656 | 935 | 377 | 689 | 1000 | |
3 | 377 | 517 | 656 | – | – | – | 328 | 525 | 722 | 344 | 558 | 771 | 312 | 435 | 558 | 344 | 599 | 853 | – | – | – | |
N | 1–2 | 1312 | 5658 | 10004 | – | – | – | – | – | – | 1312 | 5404 | 9496 | – | – | – | – | – | – | – | – | – |
3 | 968 | 4485 | 8003 | – | – | – | – | – | – | 968 | 4289 | 7610 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 75 | 123 | 171 | 75 | 128 | 180 | 79 | 143 | 207 | 75 | 116 | 157 | – | – | – | – | – | – |
2 | – | – | – | 72 | 112 | 151 | 72 | 115 | 157 | 75 | 123 | 171 | 69 | 107 | 144 | – | – | – | – | – | – | |
3 | – | – | – | 82 | 128 | 174 | 82 | 131 | 180 | 85 | 139 | 194 | 79 | 123 | 167 | – | – | – | – | – | – | |
4 | – | – | – | 118 | 182 | 246 | 118 | 189 | 259 | 121 | 198 | 276 | 115 | 177 | 239 | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | 164 | 246 | 328 | – | – | – | 164 | 254 | 344 | 164 | 262 | 361 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use