KM50TS™
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (283)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(281)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(281)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(281)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(281)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(281)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(283)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(283)
- M Rostfreier Stahl (281)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(281)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(281)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(281)
- K Gusseisen (297)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(297)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(297)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(297)
- N Buntmetalle (281)
- N1Geschmiedetes Aluminium (281)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(281)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(224)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (281)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (281)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (279)
- N7MMCs (262)
- S Hochwarmfeste Legierungen (297)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(295)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(297)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(295)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(283)
- H Gehärtete Werkstoffe (263)
- H1Gehärtete Werkstoffe 44-48 HRC(263)
- H2Gehärtete Werkstoffe 48-55 HRC(263)
- H3Gehärtete Werkstoffe 56-60 HRC(263)
- H4Gehärtete Werkstoffe >60 HRC(224)
- C Verbundwerkstoffe (CFRP) (222)
- C1CFRP, CFRP / CFRP (220)
- C2CFRP / Aluminium CFRP / Nichteisen (203)
Anwendungen
Anwendungen
Chamfer Turning (6)
Convex Drilling (4)
Cut-Off (4)
Deep Grooving (4)
Drilling (4)
Face Grooving (4)
Facing (173)
Grooving (24)
ID Facing (2)
ID Grooving (19)
ID Thread Turning (35)
Inclined Entry Drilling (4)
Inclined Exit Drilling (4)
Multiple Direction Cutting (177)
OD Thread Turning (35)
Plunge Turning (6)
Profiling (155)
TRN Boring (182)
Turning (206)
X-Offset Drilling (4)
Dreh-Durchmesser
Dreh-Durchmesser
- 0.625 in(1)
- 0.687 in(1)
- 0.75 in(1)
- 0.814 in(1)
- 0.875 in(1)
- 0.937 in(1)
- 1.0 in(1)
- 1.125 in(1)
- 1.25 in(1)
- 1.375 in(1)
- 1.5 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 1.875 in(1)
- 2.0 in(1)
bis
Dreh-Durchmesser
Dreh-Durchmesser
- 15.875 mm(1)
- 17.45 mm(1)
- 19.05 mm(1)
- 20.651 mm(1)
- 22.225 mm(1)
- 23.8 mm(1)
- 25.401 mm(1)
- 28.576 mm(1)
- 31.75 mm(1)
- 34.926 mm(1)
- 38.1 mm(1)
- 41.276 mm(1)
- 44.45 mm(1)
- 47.625 mm(1)
- 50.801 mm(1)
bis
Gewindeart
Gewindeart
- 55 (18)
- 60 (44)
- ACME (38)
- API (27)
- API BUTTRESS (5)
- API RD (25)
- BSPT (13)
- BSW (30)
- BUTTRESS (26)
- M (33)
- NPT (25)
- NPTF (13)
- RD DIN 405 (18)
- STUB ACME (30)
- TR DIN 103 (18)
- UN (39)
- UNJ (25)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (260)
- Lightly Interrupted Cut (262)
- Smooth Cut (262)
Maximale Lochtiefe [L4]
Maximale Lochtiefe [L4]
- 47.625 mm(1)
- 52.401 mm(1)
- 57.151 mm(1)
- 61.901 mm(1)
- 66.675 mm(1)
- 71.45 mm(1)
- 76.2 mm(1)
- 85.726 mm(1)
- 95.25 mm(1)
- 104.775 mm(1)
- 114.301 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 142.875 mm(1)
- 152.4 mm(1)
bis
Maximale Lochtiefe [L4]
Maximale Lochtiefe [L4]
- 1.875 in(1)
- 2.063 in(1)
- 2.25 in(1)
- 2.437 in(1)
- 2.625 in(1)
- 2.813 in(1)
- 3.0 in(1)
- 3.375 in(1)
- 3.75 in(1)
- 4.125 in(1)
- 4.5 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 5.625 in(1)
- 6.0 in(1)
bis
Reach
Reach
- 2.52 in(1)
- 2.835 in(1)
- 2.992 in(1)
- 3.189 in(1)
- 3.386 in(1)
- 3.543 in(1)
- 3.74 in(1)
- 4.213 in(1)
- 4.606 in(1)
- 5.079 in(1)
- 5.472 in(1)
- 6.22 in(1)
- 6.575 in(1)
- 7.165 in(1)
- 7.521 in(1)
bis
Reach
Reach
- 64.0 mm(1)
- 72.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 95.0 mm(1)
- 107.0 mm(1)
- 117.0 mm(1)
- 129.0 mm(1)
- 139.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 182.0 mm(1)
- 191.0 mm(1)
bis
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (18)
- 48.0 (2)
- 49.783 (1)
- 62.5 (2)
- 63.0 (2)
- 75.0 (38)
- 85.0 (4)
- 90.0 (60)
- 93.0 (59)
- 95.0 (83)
- 107.5 (18)
bis
Anschlussart
Anschlussart
- KM (197)
Anzahl der Spannuten
Anzahl der Spannuten
- 2 (15)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (3)
- 1.0 (176)
- 2.0 (186)
- 3.0 (58)
- 4.0 (181)
- 6.0 (20)
- 8.0 (110)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 1.969 in(174)
- 2.165 in(1)
- 2.362 in(13)
- 2.757 in(6)
- 3.15 in(10)
- 3.543 in(12)
- 3.938 in(10)
- 4.331 in(25)
- 4.906 in(1)
- 4.921 in(9)
- 5.094 in(1)
- 5.281 in(1)
- 5.469 in(1)
- 5.513 in(27)
- 5.656 in(1)
- 5.844 in(1)
- 6.008 in(1)
- 6.508 in(1)
- 6.883 in(1)
- 7.37 in(1)
- 7.758 in(1)
- 8.496 in(1)
- 8.871 in(1)
- 9.443 in(1)
- 9.818 in(1)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 50.0 mm(174)
- 55.0 mm(1)
- 60.0 mm(13)
- 70.0 mm(6)
- 80.0 mm(10)
- 90.0 mm(12)
- 100.0 mm(10)
- 110.0 mm(25)
- 124.625 mm(1)
- 125.0 mm(9)
- 129.4 mm(1)
- 134.15 mm(1)
- 138.925 mm(1)
- 140.0 mm(27)
- 143.675 mm(1)
- 148.425 mm(1)
- 152.6 mm(1)
- 165.3 mm(1)
- 174.826 mm(1)
- 187.201 mm(1)
- 197.05 mm(1)
- 215.8 mm(1)
- 225.326 mm(1)
- 239.851 mm(1)
- 249.375 mm(1)
bis
Eckenradius
Eckenradius
- 0.001 in(5)
- 0.002 in(27)
- 0.003 in(39)
- 0.004 in(171)
- 0.005 in(16)
- 0.006 in(31)
- 0.007 in(25)
- 0.008 in(180)
- 0.01 in(25)
- 0.011 in(16)
- 0.012 in(18)
- 0.014 in(43)
- 0.015 in(2)
- 0.016 in(215)
- 0.017 in(5)
- 0.019 in(20)
- 0.02 in(22)
- 0.021 in(1)
- 0.023 in(20)
- 0.024 in(13)
- 0.027 in(2)
- 0.028 in(5)
- 0.03 in(8)
- 0.031 in(248)
- 0.035 in(20)
- 0.037 in(7)
- 0.038 in(2)
- 0.039 in(21)
- -0.039 in(3)
- 0.047 in(233)
- 0.049 in(18)
- 0.055 in(2)
- 0.06 in(19)
- 0.062 in(54)
- 0.063 in(213)
- 0.069 in(18)
- 0.078 in(12)
- 0.079 in(20)
- 0.089 in(20)
- 0.094 in(41)
- 0.095 in(78)
- 0.098 in(8)
- 0.125 in(11)
- 0.126 in(17)
- 0.157 in(2)
- 0.237 in(2)
- 0.25 in(4)
bis
Eckenradius
Eckenradius
- 0.025 mm(5)
- 0.05 mm(27)
- 0.076 mm(39)
- 0.1 mm(171)
- 0.125 mm(16)
- 0.151 mm(31)
- 0.176 mm(25)
- 0.2 mm(180)
- 0.225 mm(14)
- 0.25 mm(25)
- 0.275 mm(16)
- 0.301 mm(18)
- 0.325 mm(22)
- 0.351 mm(41)
- 0.375 mm(2)
- 0.4 mm(215)
- 0.426 mm(5)
- 0.45 mm(20)
- 0.476 mm(5)
- 0.5 mm(22)
- 0.525 mm(1)
- 0.576 mm(20)
- 0.601 mm(13)
- 0.65 mm(2)
- 0.701 mm(5)
- 0.75 mm(8)
- 0.775 mm(18)
- 0.8 mm(230)
- 0.9 mm(20)
- 0.925 mm(7)
- 0.976 mm(2)
- 1.0 mm(21)
- -1.0 mm(3)
- 1.201 mm(233)
- 1.25 mm(18)
- 1.401 mm(2)
- 1.5 mm(18)
- 1.526 mm(1)
- 1.576 mm(54)
- 1.6 mm(213)
- 1.75 mm(18)
- 1.975 mm(12)
- 2.0 mm(20)
- 2.25 mm(20)
- 2.375 mm(41)
- 2.401 mm(78)
- 2.5 mm(8)
- 3.176 mm(11)
- 3.2 mm(17)
- 4.0 mm(2)
- 6.0 mm(2)
- 6.351 mm(4)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- 13E (146)
- 241 (42)
- AC5 (2)
- CG5 (13)
- CG6 (3)
- CL4 (95)
- CM1 (13)
- CM2 (144)
- CM3 (100)
- CM4 (82)
- CM5 (2)
- CPX (141)
- CS5 (15)
- CW2 (67)
- CW2015 (121)
- CW3020 (4)
- CW5025 (154)
- GX (73)
- HCK10 (3)
- HCK20 (5)
- HK1500 (90)
- HK35 (3)
- HT2 (72)
- HTX (51)
- HWK15 (3)
- K00326 (10)
- K00331 (7)
- K060 (101)
- K090 (163)
- K1 (49)
- K10M (164)
- K10P (160)
- K10U (145)
- K15 (11)
- K15U (145)
- K20K (175)
- K21 (77)
- K25M (161)
- K25P (160)
- K2885 (18)
- K313 (246)
- K35P (108)
- K420 (164)
- K45 (109)
- K4H (15)
- K6 (6)
- K68 (236)
- K8735 (10)
- KB1340 (72)
- KB1345 (103)
- KB1610 (144)
- KB1625 (110)
- KB1630 (120)
- KB5610 (114)
- KB5625 (127)
- KB5630 (93)
- KB9610 (159)
- KB9640 (87)
- KBH10 (142)
- KBH10B (103)
- KBH20 (165)
- KBH20B (103)
- KBK35 (44)
- KBK45 (2)
- KC210 (123)
- KC250 (153)
- KC5010 (256)
- KC5020P (2)
- KC5025 (264)
- KC5410 (227)
- KC5510 (174)
- KC5525 (112)
- KC710 (88)
- KC7140 (15)
- KC720 (233)
- KC7215 (15)
- KC722 (75)
- KC7225 (15)
- KC730 (230)
- KC7310 (192)
- KC732 (190)
- KC7815 (15)
- KC7820 (9)
- KC7845 (6)
- KC7935 (15)
- KC8050 (220)
- KC810 (257)
- KC850 (246)
- KC9010 (197)
- KC9025 (218)
- KC910 (231)
- KC9105 (212)
- KC9110 (246)
- KC9120 (221)
- KC9125 (220)
- KC9125RR (24)
- KC9140 (176)
- KC9145 (168)
- KC9210 (21)
- KC9215 (174)
- KC9225 (216)
- KC9240 (206)
- KC9240NEW (206)
- KC9245 (174)
- KC9315 (220)
- KC9320 (232)
- KC9325 (202)
- KC935 (244)
- KC950 (235)
- KC990 (216)
- KCD25 (69)
- KCK05 (216)
- KCK05B (167)
- KCK15 (206)
- KCK15B (216)
- KCK20 (231)
- KCK20B (234)
- KCM15 (204)
- KCM15B (205)
- KCM25 (216)
- KCM25B (204)
- KCM35 (187)
- KCM35B (131)
- KCMS35 (12)
- KCP05 (199)
- KCP05B (149)
- KCP10 (218)
- KCP10B (246)
- KCP10C (8)
- KCP15 (2)
- KCP25 (218)
- KCP25B (246)
- KCP25C (246)
- KCP30 (205)
- KCP30B (168)
- KCP40 (163)
- KCP40B (174)
- KCPK05 (184)
- KCPK10 (15)
- KCS10 (74)
- KCS10B (213)
- KCU10 (246)
- KCU10B (246)
- KCU25 (259)
- KCU25B (244)
- KCU40 (15)
- KD050 (146)
- KD081 (133)
- KD100 (130)
- KD105 (20)
- KD120 (160)
- KD1400 (122)
- KD1405 (102)
- KD1425 (157)
- KM1 (75)
- KMF (57)
- KS15 (52)
- KT1120 (40)
- KT125 (151)
- KT150 (127)
- KT175 (175)
- KT315 (215)
- KT325 (76)
- KT5020 (11)
- KTP10 (171)
- KTP25S (118)
- KU10 (23)
- KU10T (203)
- KU25T (33)
- KU30T (230)
- KU40D (15)
- KY1310 (151)
- KY1320 (184)
- KY1525 (4)
- KY1540 (114)
- KY1615 (164)
- KY2000 (117)
- KY2100 (99)
- KY3000 (181)
- KY3400 (158)
- KY3500 (186)
- KY4000 (85)
- KY4300 (89)
- KY4400 (163)
- KYHK15B (175)
- KYK10 (126)
- KYK25 (156)
- KYK35 (186)
- KYS25 (111)
- KYS30 (124)
- MC2 (4)
- MC3 (2)
- NL200 (63)
- NL250 (174)
- NL300 (124)
- NL400 (69)
- NL920 (151)
- P25 (80)
- PB100 (38)
- PB170 (41)
- PB250 (41)
- PB300 (38)
- PD100 (3)
- PD50 (3)
- PN120 (2)
- PS5 (67)
- SP0819 (110)
- SP0A00 (17)
- SP0PW3 (3)
- SP3019 (102)
- SP4019 (128)
- SP4036 (7)
- SP4066 (4)
- SP4093 (7)
- SP61EJ (24)
- SPADAP (4)
- SPB400 (10)
- SPMQMA (3)
- SPN4W2 (2)
- SPSREJ (11)
- THM (89)
- THM-X (73)
- THMF-X (59)
- TN10P (156)
- TN10U (121)
- TN15M (135)
- TN15U (118)
- TN2000 (95)
- TN20K (148)
- TN20P (152)
- TN30M (139)
- TN30P (134)
- TN4000 (92)
- TN5015 (139)
- TN5020 (111)
- TN5105 (116)
- TN5120 (134)
- TN6010 (112)
- TN6025 (129)
- TN7005 (93)
- TN7010 (145)
- TN7015 (145)
- TN7025 (145)
- TN7035 (118)
- TN7105 (79)
- TN7110 (158)
- TN7115 (134)
- TN7125 (122)
- TN7135 (118)
- TN8025 (130)
- TTI15 (61)
- TTM (1)
- TTM09 (26)
- TTR (59)
- TTR-X (2)
- TTS (80)
- TTX (60)
- W00162 (8)
- W00342 (5)
- WBH10C (123)
- WBH10P (91)
- WBH10U (123)
- WBH20P (118)
- WBH25P (114)
- WBH25U (99)
- WBH30P (91)
- WBK40U (61)
- WBK45U (83)
- WDN00U (83)
- WDN25U (110)
- WK05CT (150)
- WK15CT (101)
- WK20CT (177)
- WM15CT (173)
- WM25CT (171)
- WM35CT (145)
- WP05CT (49)
- WP15CT (175)
- WP20TT (4)
- WP25CT (179)
- WP35CT (154)
- WS10PT (137)
- WS25PT (145)
- WU05PT (3)
- WU10HT (155)
- WU10PT (112)
- WU25PT (108)
- X00511 (42)
- X00580 (42)
- X00581 (42)
- X00582 (42)
- X00583 (42)
- X00584 (42)
- X00585 (42)
- X00586 (42)
- X00591 (42)
- X00592 (42)
- X00593 (42)
- X00594 (42)
- X00596 (42)
- X00597 (42)
- X00599 (42)
Schneidrichtung
Schneidrichtung
- L (85)
- N (6)
- R (106)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (282)
- Y (132)
Bohrertyp
Bohrertyp
- 86-01 (15)
F Abmessung
F Abmessung
- 0.0 mm(8)
- 7.0 mm(4)
- 9.0 mm(6)
- 11.0 mm(11)
- 13.0 mm(10)
- 17.0 mm(20)
- 22.0 mm(20)
- 27.0 mm(29)
- 30.0 mm(18)
- 32.0 mm(2)
- 35.0 mm(54)
bis
F Abmessung
F Abmessung
- 0.0 in(8)
- 0.276 in(4)
- 0.354 in(6)
- 0.433 in(11)
- 0.512 in(10)
- 0.669 in(20)
- 0.866 in(20)
- 1.063 in(29)
- 1.181 in(18)
- 1.26 in(2)
- 1.379 in(54)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(4)
- -1.0 mm(1)
- 13.0 mm(4)
- 16.0 mm(6)
- 18.5 mm(2)
- 20.0 mm(9)
- 25.0 mm(10)
- 32.0 mm(18)
- 34.0 mm(2)
- 40.0 mm(20)
- 41.301 mm(2)
- 47.6 mm(2)
- 50.0 mm(29)
- 57.2 mm(2)
- 63.0 mm(20)
- 64.0 mm(2)
- 70.0 mm(54)
- 80.0 mm(16)
- 86.0 mm(2)
- 88.9 mm(2)
- 90.0 mm(4)
- 100.0 mm(11)
- 104.0 mm(2)
- 139.701 mm(2)
- 174.601 mm(2)
- 209.601 mm(2)
- 222.3 mm(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(4)
- -0.039 in(1)
- 0.512 in(4)
- 0.63 in(6)
- 0.728 in(2)
- 0.787 in(9)
- 0.984 in(10)
- 1.26 in(18)
- 1.339 in(2)
- 1.575 in(20)
- 1.627 in(2)
- 1.874 in(2)
- 1.969 in(29)
- 2.253 in(2)
- 2.48 in(20)
- 2.52 in(2)
- 2.757 in(54)
- 3.15 in(16)
- 3.386 in(2)
- 3.5 in(2)
- 3.543 in(4)
- 3.938 in(11)
- 4.094 in(2)
- 5.5 in(2)
- 6.875 in(2)
- 8.252 in(2)
- 8.752 in(2)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -0.039 in(3)
- 393.661 in(26)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 mm(3)
- 9999.0 mm(26)
bis
Schneidrichtung
Schneidrichtung
- B (57)
- E (33)
- P (2)
- S (90)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (115)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (18)
- NEUTRAL (ZERO) (32)
- POSITIVE-NEGATIVE (1)
- POSITIVE-ZERO (15)
Bohrungstiefe min.
Bohrungstiefe min.
- 1.387 in(2)
- 1.508 in(3)
- 1.655 in(2)
- 1.665 in(2)
- 1.938 in(2)
- 1.969 in(108)
- 2.165 in(1)
- 2.209 in(2)
- 2.211 in(2)
- 2.362 in(4)
- 2.382 in(4)
- 2.757 in(1)
- 2.761 in(2)
- 2.769 in(4)
- 2.77 in(1)
- 2.775 in(6)
- 3.15 in(5)
- 3.2 in(4)
- 3.434 in(8)
- 3.469 in(2)
- 3.476 in(4)
- 3.593 in(4)
- 3.594 in(2)
- 3.789 in(8)
- 3.907 in(1)
- 3.938 in(4)
- 4.724 in(2)
- 4.726 in(4)
- 4.738 in(13)
- 5.513 in(4)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 35.2 mm(2)
- 38.301 mm(3)
- 42.0 mm(2)
- 42.276 mm(2)
- 49.225 mm(2)
- 50.0 mm(108)
- 55.0 mm(1)
- 56.1 mm(2)
- 56.151 mm(2)
- 60.0 mm(4)
- 60.475 mm(4)
- 70.0 mm(1)
- 70.101 mm(2)
- 70.325 mm(4)
- 70.351 mm(1)
- 70.476 mm(6)
- 80.0 mm(5)
- 81.25 mm(4)
- 87.226 mm(8)
- 88.101 mm(2)
- 88.301 mm(4)
- 91.25 mm(4)
- 91.275 mm(2)
- 96.25 mm(8)
- 99.25 mm(1)
- 100.0 mm(4)
- 120.0 mm(2)
- 120.025 mm(4)
- 120.351 mm(13)
- 140.0 mm(4)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- S (107)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (16)
- CARTRIDGE MOUNT (4)
- COMBI SHELL ADAPTER (3)
- CUTOFF SUPPORT BLADE (2)
- DRILL CHUCK ADAPTER (1)
- END MILL ADAPTER (12)
- ER COLLET CHUCK (3)
- EXTENSION (2)
- HYDRAULIC CHUCK (8)
- REDUCER (2)
- SHELL MILL ADAPTER (9)
- TAP CHUCK ADAPTER (2)
- WHISTLE NOTCH ADAPTER (10)
Spannsystem
Spannsystem
- C (4)
- D (29)
- M (109)
- N (49)
- P (41)
- S (54)
Schnittbreite
Schnittbreite
- 0.02 in(6)
- 0.031 in(6)
- 0.035 in(6)
- 0.039 in(18)
- 0.041 in(6)
- 0.047 in(18)
- 0.055 in(6)
- 0.058 in(6)
- 0.06 in(18)
- 0.062 in(18)
- 0.067 in(6)
- 0.069 in(18)
- 0.073 in(12)
- 0.077 in(6)
- 0.078 in(12)
- 0.079 in(18)
- 0.088 in(18)
- 0.089 in(13)
- 0.094 in(5)
- 0.095 in(18)
- 0.097 in(12)
- 0.098 in(18)
- 0.105 in(12)
- 0.108 in(18)
- 0.11 in(12)
- 0.119 in(26)
- 0.122 in(12)
- 0.125 in(26)
- 0.126 in(26)
- 0.128 in(18)
- 0.129 in(6)
- 0.131 in(5)
- 0.138 in(26)
- 0.143 in(12)
- 0.147 in(3)
- 0.15 in(3)
- 0.151 in(3)
- 0.152 in(6)
- 0.156 in(12)
- 0.157 in(20)
- 0.167 in(20)
- 0.169 in(12)
- 0.177 in(20)
- 0.178 in(12)
- 0.185 in(16)
- 0.188 in(20)
- 0.189 in(20)
- 0.192 in(5)
- 0.193 in(5)
- 0.195 in(12)
- 0.196 in(12)
- 0.197 in(8)
- 0.202 in(8)
- 0.213 in(8)
- 0.217 in(8)
- 0.219 in(8)
- 0.237 in(8)
- 0.25 in(8)
- 0.256 in(8)
bis
Schnittbreite
Schnittbreite
- 0.5 mm(6)
- 0.775 mm(6)
- 0.8 mm(6)
- 0.9 mm(6)
- 1.0 mm(18)
- 1.05 mm(6)
- 1.201 mm(18)
- 1.401 mm(6)
- 1.475 mm(6)
- 1.5 mm(18)
- 1.576 mm(18)
- 1.701 mm(6)
- 1.75 mm(18)
- 1.826 mm(12)
- 1.951 mm(6)
- 1.975 mm(12)
- 2.0 mm(18)
- 2.2 mm(18)
- 2.225 mm(18)
- 2.25 mm(13)
- 2.375 mm(5)
- 2.401 mm(18)
- 2.475 mm(12)
- 2.5 mm(18)
- 2.676 mm(12)
- 2.75 mm(18)
- 2.801 mm(12)
- 3.0 mm(26)
- 3.1 mm(12)
- 3.176 mm(26)
- 3.2 mm(26)
- 3.25 mm(18)
- 3.276 mm(6)
- 3.325 mm(5)
- 3.5 mm(26)
- 3.6 mm(12)
- 3.725 mm(3)
- 3.801 mm(3)
- 3.825 mm(3)
- 3.85 mm(6)
- 3.95 mm(12)
- 3.975 mm(5)
- 4.0 mm(20)
- 4.25 mm(20)
- 4.3 mm(12)
- 4.5 mm(20)
- 4.525 mm(12)
- 4.7 mm(16)
- 4.775 mm(20)
- 4.801 mm(20)
- 4.875 mm(5)
- 4.9 mm(5)
- 4.95 mm(12)
- 4.976 mm(12)
- 5.0 mm(8)
- 5.125 mm(8)
- 5.4 mm(8)
- 5.5 mm(8)
- 5.575 mm(8)
- 6.0 mm(8)
- 6.351 mm(8)
- 6.5 mm(8)
bis
Stirnseitentyp
Stirnseitentyp
- FDA - Milling Cutter Arbor (12)
- KMT - KM Adapter (4)
- MCS - Modular Cartridge System (4)
- PMK - Prismatic Adapter Kenna (2)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (3)
- ZYL - Cylindrical Adapter (47)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (81)
- D-DIAMOND/RHOMBIC 55 (60)
- LT-TRIANGLE LAY DOWN THREAD 60 (24)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (6)
- S-SQUARE 90 (46)
- T-TRIANGLE 60 (10)
- TN-TOP NOTCH (26)
- V-DIAMOND/RHOMBIC 35 (19)
- W-TRIGON 80 (13)
- X-TRIGON 84 (15)
Stirnseitenausführung
Stirnseitenausführung
- FDA13 Long&TranDrv&CutRetScr (2)
- FDA22 Transv Drive & SHCS (9)
- FDA23 Longit&Transv Drv&SHCS (1)
- KMT00 All KM, except 02,05,09 (4)
- MCS01 Modular Deep Grooving (4)
- PMK02 Cutoff Sup Bld A1-A3 (2)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (3)
- ZYL01 Straight Shank (9)
- ZYL10 Weldon Shank (12)
- ZYL13 2Deg-Whistle Notch (10)
- ZYL22 Boring Bar Shank (16)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 2 (6)
- 3 (12)
- 4 (8)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.21 in(7)
- 0.294 in(2)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 5.325 mm(7)
- 7.476 mm(2)
bis
Messlänge
Messlänge
- 1.024 in(3)
- 1.102 in(1)
- 1.26 in(3)
- 1.575 in(3)
- 1.655 in(1)
- 1.772 in(2)
- 1.969 in(4)
- 1.971 in(1)
- 2.106 in(2)
- 2.165 in(4)
- 2.177 in(2)
- 2.303 in(2)
- 2.362 in(7)
- 2.559 in(6)
- 2.757 in(9)
- 2.953 in(2)
- 2.955 in(1)
- 3.15 in(8)
- 3.346 in(6)
- 3.543 in(2)
- 3.74 in(1)
- 3.938 in(2)
- 4.134 in(1)
- 4.366 in(1)
Messlänge
Messlänge
- 70 mm(9)
- 80 mm(8)
- 60 mm(7)
- 65 mm(6)
- 85 mm(6)
- 50 mm(4)
- 55 mm(4)
- 26 mm(3)
- 32 mm(3)
- 40 mm(3)
- 100 mm(2)
- 45 mm(2)
- 75 mm(2)
- 90 mm(2)
- 105 mm(1)
- 28 mm(1)
- 42 mm(1)
- 95 mm(1)
- 50.051 mm(1)
- 53.5 mm(2)
- 55.301 mm(2)
- 58.5 mm(2)
- 75.05 mm(1)
- 110.9 mm(1)
Größe der Stirnseite
Größe der Stirnseite
- 0.098 in(1)
- 0.237 in(3)
- 0.315 in(3)
- 0.375 in(2)
- 0.394 in(4)
- 0.473 in(4)
- 0.5 in(3)
- 0.551 in(2)
- 0.625 in(2)
- 0.63 in(4)
- 0.709 in(2)
- 0.749 in(1)
- 0.75 in(4)
- 0.787 in(4)
- 0.866 in(2)
- 0.984 in(3)
- 1.0 in(4)
- 1.063 in(2)
- 1.221 in(1)
- 1.25 in(3)
- 1.26 in(6)
- 1.5 in(1)
- 1.575 in(2)
- 1.969 in(2)
bis
Größe der Stirnseite
Größe der Stirnseite
- 2.5 mm(1)
- 6.0 mm(3)
- 8.0 mm(3)
- 9.525 mm(2)
- 10.0 mm(4)
- 12.0 mm(4)
- 12.701 mm(3)
- 14.0 mm(2)
- 15.875 mm(2)
- 16.0 mm(4)
- 18.0 mm(2)
- 19.026 mm(1)
- 19.05 mm(4)
- 20.0 mm(4)
- 22.0 mm(2)
- 25.0 mm(3)
- 25.401 mm(4)
- 27.0 mm(2)
- 31.026 mm(1)
- 31.75 mm(3)
- 32.0 mm(6)
- 38.1 mm(1)
- 40.0 mm(2)
- 50.0 mm(2)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (204)
- B L (195)
- C A (190)
- C N (206)
- D P (174)
- H T (217)
- H W (270)
backEnd
Aufnahmeart
Aufnahmeart
- TAPER SHANK (197)
Systemgröße
Systemgröße
- KM50 (11)
- KM50TS (260)
Hinterer Durchmesser
Hinterer Durchmesser
- 50.0 mm(376)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 1.969 in(376)
bis
No filters matching ""
