Produkt ähnlich wie:
RPMT10-41-X4 • 4 Schneidkanten • Für die Schlichtbearbeitung von legiertem Stahl und Eisen
Wendeschneidplatten
Material Nummer5666394
ISO Katalog NummerRPMT10T3M0E41X4ANSI Katalog NummerRPMT10T3M0E41X4
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Nummer | 5666394 |
ISO Katalog Nummer | RPMT10T3M0E41X4 |
ANSI Katalog Nummer | RPMT10T3M0E41X4 |
Sorte | MP91M |
[D] Wendeschneidplatten-Größe (Inkreis) | 10 mm |
[D] Wendeschneidplatten-Größe (Inkreis) | .394 in |
[S] Dicke der Wendeschneidplatte | 3.97 mm |
[S] Dicke der Wendeschneidplatte | .156 in |
Mittlere Spandicke [HM] | 0.04 mm |
Mittlere Spandicke [HM] | .002 in |
Wendeschneidplatte Anzahl der Schneidkanten | 4 |
Features and benefits
- Erste Wahl für die Schlichtbearbeitung von legiertem Stahl und Eisen.
- Vier Indexierungspositionen:
— Ap max.: 5 mm [0,196″]
— Ap empfohlen: ≤2,5 mm [0,098″]
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
Insert Selection
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
P3–P4 | 422-X8 | SP6519 | 432-X5 | SP6519 | 422-X4 | SP6519 |
P5–P6 | 422-X8 | SP6519 | T-X4 | SP6519 | T-X4 | X500 |
M1–M2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
M3 | 422-X8 | X700 | 432-X5 | SP6519 | 422-X4 | X500 |
K1–K2 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
K3 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
N1–N2 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
N3 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
S1–S2 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
S3 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
S4 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
H1 | – | – | – | – | – | – |
Feeds
Bei einer axialen Schnitttiefe von 5,00 (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,12 | 0,19 | 0,26 | 0,08 | 0,13 | 0,18 | 0,06 | 0,10 | 0,14 | 0,05 | 0,09 | 0,12 | 0,05 | 0,08 | 0,11 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
422–X4 | 0,12 | 0,29 | 0,57 | 0,08 | 0,21 | 0,40 | 0,06 | 0,16 | 0,30 | 0,05 | 0,14 | 0,26 | 0,05 | 0,13 | 0,24 | 422–X4 |
T–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | T–X4 |
Bei einer axialen Schnitttiefe von 2,50 (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,13 | 0,21 | 0,30 | 0,10 | 0,15 | 0,21 | 0,07 | 0,12 | 0,16 | 0,06 | 0,10 | 0,14 | 0,06 | 0,09 | 0,13 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 432–X5 |
422–X4 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 422–X4 |
T–X4 | 0,27 | 0,48 | 0,77 | 0,19 | 0,34 | 0,55 | 0,14 | 0,25 | 0,41 | 0,13 | 0,22 | 0,35 | 0,12 | 0,20 | 0,32 | T–X4 |
Bei einer axialen Schnitttiefe von 2,00 (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,16 | 0,26 | 0,36 | 0,12 | 0,19 | 0,26 | 0,09 | 0,14 | 0,19 | 0,08 | 0,12 | 0,17 | 0,07 | 0,11 | 0,15 | 701–X4 |
422–X8 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X8 |
432–X5 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 432–X5 |
422–X4 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X4 |
T–X4 | 0,33 | 0,58 | 0,94 | 0,23 | 0,42 | 0,67 | 0,18 | 0,31 | 0,49 | 0,15 | 0,27 | 0,43 | 0,14 | 0,25 | 0,39 | T–X4 |
Bei einer axialen Schnitttiefe von 1,50 (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | 0,14 | 0,23 | 0,32 | 0,10 | 0,17 | 0,23 | 0,08 | 0,13 | 0,17 | 0,07 | 0,11 | 0,15 | 0,06 | 0,10 | 0,14 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 432–X5 |
422–X4 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 422–X4 |
T–X4 | 0,29 | 0,52 | 0,84 | 0,21 | 0,37 | 0,59 | 0,16 | 0,28 | 0,44 | 0,14 | 0,24 | 0,38 | 0,13 | 0,22 | 0,35 | T–X4 |
Light | General | Heavy |
At .197 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .005 | .009 | .013 | .003 | .007 | .009 | .002 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
422–X4 | .005 | .012 | .023 | .003 | .008 | .016 | .002 | .006 | .012 | .002 | .006 | .010 | .002 | .005 | .010 | 422–X4 |
T–X4 | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .011 | T–X4 |
At .098 Axial Depth of Cut (ap)
Light | General | Heavy |
At .079 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .005 | .011 | .015 | .004 | .008 | .011 | .003 | .006 | .008 | .002 | .005 | .007 | .002 | .005 | .006 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 432–X5 |
422–X4 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 422–X4 |
T–X4 | .011 | .018 | .029 | .008 | .013 | .020 | .006 | .010 | .015 | .005 | .008 | .013 | .005 | .008 | .012 | T–X4 |
At .059 Axial Depth of Cut (ap)
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
– | 5% | 10% | 20% | 30% | 40–100% | |||||||||||
701–X4 | .006 | .013 | .018 | .005 | .009 | .013 | .003 | .007 | .010 | .003 | .006 | .008 | .003 | .006 | .008 | 701–X4 |
422–X8 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X8 |
432–X5 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 432–X5 |
422–X4 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X4 |
T–X4 | .013 | .022 | .035 | .009 | .016 | .025 | .007 | .012 | .018 | .006 | .010 | .016 | .006 | .009 | .015 | T–X4 |
Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
701–X4 | .006 | .012 | .016 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | 701–X4 |
422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
432–X5 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 432–X5 |
422–X4 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 422–X4 |
T–X4 | .011 | .019 | .031 | .008 | .014 | .022 | .006 | .010 | .016 | .005 | .009 | .014 | .005 | .008 | .013 | T–X4 |
Speeds
Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]
Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
P | 1 | – | – | – | – | – | – | 130 | 213 | 295 | 140 | 228 | 315 | 130 | 200 | 270 | 140 | 243 | 345 | 140 | 255 | 370 |
2 | – | – | – | – | – | – | 115 | 188 | 260 | 120 | 198 | 275 | 115 | 178 | 240 | 120 | 213 | 305 | 120 | 223 | 325 | |
3 | – | – | – | – | – | – | 100 | 165 | 230 | 105 | 175 | 245 | 100 | 155 | 210 | 105 | 188 | 270 | 105 | 198 | 290 | |
4 | – | – | – | – | – | – | 75 | 125 | 175 | 80 | 135 | 190 | 75 | 118 | 160 | 80 | 143 | 205 | 80 | 145 | 210 | |
5 | – | – | – | 70 | 103 | 135 | 70 | 105 | 140 | 70 | 110 | 150 | 70 | 100 | 130 | – | – | – | 80 | 120 | 160 | |
6 | – | – | – | 50 | 83 | 115 | 50 | 85 | 120 | 50 | 90 | 130 | 50 | 80 | 110 | – | – | – | 60 | 100 | 140 | |
M | 1 | – | – | – | 115 | 188 | 260 | 115 | 193 | 270 | 120 | 200 | 280 | 115 | 183 | 250 | – | – | – | 120 | 205 | 290 |
2 | – | – | – | 105 | 168 | 230 | 105 | 170 | 235 | 110 | 180 | 250 | 100 | 160 | 220 | – | – | – | 110 | 185 | 260 | |
3 | – | – | – | 85 | 138 | 190 | 85 | 140 | 195 | 90 | 145 | 200 | 80 | 130 | 180 | – | – | – | 90 | 150 | 210 | |
K | 1 | 135 | 213 | 290 | – | – | – | 140 | 218 | 295 | 145 | 238 | 330 | 120 | 200 | 280 | 145 | 255 | 365 | 145 | 268 | 390 |
2 | 120 | 183 | 245 | – | – | – | 110 | 175 | 240 | 115 | 185 | 255 | 105 | 155 | 205 | 115 | 200 | 285 | 115 | 210 | 305 | |
3 | 115 | 158 | 200 | – | – | – | 100 | 160 | 220 | 105 | 170 | 235 | 95 | 133 | 170 | 105 | 183 | 260 | – | – | – | |
N | 1–2 | 400 | 1725 | 3050 | – | – | – | – | – | – | 400 | 1648 | 2895 | – | – | – | – | – | – | – | – | – |
3 | 295 | 1368 | 2440 | – | – | – | – | – | – | 295 | 1308 | 2320 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 23 | 38 | 52 | 23 | 39 | 55 | 24 | 44 | 63 | 23 | 36 | 48 | – | – | – | – | – | – |
2 | – | – | – | 22 | 34 | 46 | 22 | 35 | 48 | 23 | 38 | 52 | 21 | 33 | 44 | – | – | – | – | – | – | |
3 | – | – | – | 25 | 39 | 53 | 25 | 40 | 55 | 26 | 43 | 59 | 24 | 38 | 51 | – | – | – | – | – | – | |
4 | – | – | – | 36 | 56 | 75 | 36 | 58 | 79 | 37 | 61 | 84 | 35 | 54 | 73 | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | 50 | 75 | 100 | – | – | – | 50 | 78 | 105 | 50 | 80 | 110 |
Recommended Starting Speeds [SFM]
Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
P | 1 | – | – | – | – | – | – | 426 | 697 | 968 | 459 | 746 | 1033 | 426 | 656 | 886 | 459 | 795 | 1132 | 459 | 836 | 1214 |
2 | – | – | – | – | – | – | 377 | 615 | 853 | 394 | 648 | 902 | 377 | 582 | 787 | 394 | 697 | 1000 | 394 | 730 | 1066 | |
3 | – | – | – | – | – | – | 328 | 541 | 754 | 344 | 574 | 804 | 328 | 508 | 689 | 344 | 615 | 886 | 344 | 648 | 951 | |
4 | – | – | – | – | – | – | 246 | 410 | 574 | 262 | 443 | 623 | 246 | 385 | 525 | 262 | 467 | 672 | 262 | 476 | 689 | |
5 | – | – | – | 230 | 338 | 443 | 246 | 410 | 574 | 230 | 361 | 492 | 230 | 328 | 426 | – | – | – | 262 | 394 | 525 | |
6 | – | – | – | 164 | 272 | 377 | 230 | 344 | 459 | 164 | 295 | 426 | 164 | 262 | 361 | – | – | – | 197 | 328 | 459 | |
M | 1 | – | – | – | 377 | 615 | 853 | 377 | 631 | 886 | 394 | 656 | 918 | 377 | 599 | 820 | – | – | – | 394 | 672 | 951 |
2 | – | – | – | 344 | 549 | 754 | 344 | 558 | 771 | 361 | 590 | 820 | 328 | 525 | 722 | – | – | – | 361 | 607 | 853 | |
3 | – | – | – | 279 | 451 | 623 | 279 | 459 | 640 | 295 | 476 | 656 | 262 | 426 | 590 | – | – | – | 295 | 492 | 689 | |
K | 1 | 443 | 697 | 951 | – | – | – | 459 | 713 | 968 | 476 | 779 | 1082 | 394 | 656 | 918 | 476 | 836 | 1197 | 476 | 877 | 1279 |
2 | 394 | 599 | 804 | – | – | – | 361 | 574 | 787 | 377 | 607 | 836 | 344 | 508 | 672 | 377 | 656 | 935 | 377 | 689 | 1000 | |
3 | 377 | 517 | 656 | – | – | – | 328 | 525 | 722 | 344 | 558 | 771 | 312 | 435 | 558 | 344 | 599 | 853 | – | – | – | |
N | 1–2 | 1312 | 5658 | 10004 | – | – | – | – | – | – | 1312 | 5404 | 9496 | – | – | – | – | – | – | – | – | – |
3 | 968 | 4485 | 8003 | – | – | – | – | – | – | 968 | 4289 | 7610 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 75 | 123 | 171 | 75 | 128 | 180 | 79 | 143 | 207 | 75 | 116 | 157 | – | – | – | – | – | – |
2 | – | – | – | 72 | 112 | 151 | 72 | 115 | 157 | 75 | 123 | 171 | 69 | 107 | 144 | – | – | – | – | – | – | |
3 | – | – | – | 82 | 128 | 174 | 82 | 131 | 180 | 85 | 139 | 194 | 79 | 123 | 167 | – | – | – | – | – | – | |
4 | – | – | – | 118 | 182 | 246 | 118 | 189 | 259 | 121 | 198 | 276 | 115 | 177 | 239 | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | 164 | 246 | 328 | – | – | – | 164 | 254 | 344 | 164 | 262 | 361 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use