Slotting: Shoulder ProfilingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 5672883 |
| ISO Catalog ID | 5230VS12-A080Z5R65 |
| ANSI Catalog ID | 5230VS12-A080Z05R65 |
| [D1] Diametro di taglio effettivo | 80 mm |
| [D1] Diametro di taglio effettivo | 3.15 in |
| [D] Dia adattatore / stelo / foro | 32 mm |
| [D] Dia adattatore / stelo / foro | 1.26 in |
| [D6] Diametro mozzo | 74 mm |
| [D6] Diametro mozzo | 2.913 in |
| [L] Lunghezza complessiva | 95 mm |
| [L] Lunghezza complessiva | 3.74 in |
| [AP1MAX] 1° profondità di taglio massima | 65 mm |
| [AP1MAX] 1° profondità di taglio massima | 2.559 in |
| Numero di inserti | 35 |
| [Z] Numero di vani | 5 |
Slotting: Shoulder ProfilingCrea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
| 5230 VS12 • Recommended Starting Feeds [mm/th] | ||||||||||||
| Geometria dell'inserto | Avanzamento per dente programmato (fz) in base alla % della profondità di taglio radiale (ae) | |||||||||||
| 10% | 20% | 30% | 40–100% | |||||||||
| L | M | H | L | M | H | L | M | H | L | M | H | |
| .E..422 | 0.004 | 0.013 | 0.021 | 0.003 | 0.010 | 0.016 | 0.002 | 0.009 | 0.014 | 0.002 | 0.008 | 0.013 |
| .E..423 | 0.005 | 0.015 | 0.025 | 0.004 | 0.011 | 0.019 | 0.003 | 0.010 | 0.016 | 0.003 | 0.009 | 0.015 |
| .E..41 | 0.006 | 0.017 | 0.027 | 0.004 | 0.013 | 0.020 | 0.004 | 0.011 | 0.017 | 0.003 | 0.010 | 0.016 |
| ...TN | 0.007 | 0.017 | 0.025 | 0.005 | 0.013 | 0.019 | 0.004 | 0.011 | 0.016 | 0.004 | 0.010 | 0.015 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. | ||||||||||||
| 5230 VS12 • Recommended Starting Feeds [IPT] | ||||||||||||
| Geometria dell'inserto | Avanzamento per dente programmato (fz) in base alla % della profondità di taglio radiale (ae) | |||||||||||
| 10% | 20% | 30% | 40–100% | |||||||||
| L | M | H | L | M | H | L | M | H | L | M | H | |
| .E..422 | 0.004 | 0.013 | 0.021 | 0.003 | 0.010 | 0.016 | 0.002 | 0.009 | 0.014 | 0.002 | 0.008 | 0.013 |
| .E..423 | 0.005 | 0.015 | 0.025 | 0.004 | 0.011 | 0.019 | 0.003 | 0.010 | 0.016 | 0.003 | 0.009 | 0.015 |
| .E..41 | 0.006 | 0.017 | 0.027 | 0.004 | 0.013 | 0.020 | 0.004 | 0.011 | 0.017 | 0.003 | 0.010 | 0.016 |
| ...TN | 0.007 | 0.017 | 0.025 | 0.005 | 0.013 | 0.019 | 0.004 | 0.011 | 0.016 | 0.004 | 0.010 | 0.015 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. | ||||||||||||
| 5720 Series • Recommended Starting Speed [SFM] | |||||||||||||
| Qualità | MP91M | KCSM40 | SP6519 | X500 | |||||||||
| Chip Thickness hex Inch | Min | Max | Min | Max | Min | Max | Min | Max | |||||
| Gruppo materiali | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | |
| P | 1 | 1130 | 805 | 460 | 1150 | 1050 | 985 | 970 | 705 | 425 | 885 | 655 | 425 |
| 2 | 1000 | 705 | 395 | 985 | 885 | 720 | 855 | 625 | 375 | 785 | 920 | 375 | |
| 3 | 885 | 625 | 345 | 920 | 785 | 640 | 755 | 540 | 330 | 690 | 510 | 330 | |
| 4 | 675 | 475 | 260 | 785 | 675 | 540 | 575 | 410 | 245 | 525 | 395 | 245 | |
| 5 | – | – | – | 655 | 590 | 525 | 460 | 345 | 230 | 425 | 330 | 230 | |
| 6 | – | – | – | 590 | 460 | 330 | 395 | 280 | 165 | 360 | 260 | 165 | |
| M | 1 | – | – | – | 855 | 690 | 605 | 885 | 640 | 375 | 820 | 605 | 375 |
| 2 | – | – | – | 770 | 590 | 475 | 770 | 560 | 345 | 720 | 525 | 330 | |
| 3 | – | – | – | 575 | 475 | 360 | 640 | 460 | 280 | 590 | 425 | 260 | |
| K | 1 | 1200 | 835 | 475 | – | – | – | – | – | – | – | – | – |
| 2 | 935 | 655 | 375 | – | – | – | – | – | – | – | – | – | |
| 3 | 855 | 605 | 345 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 165 | 130 | 80 | 180 | 130 | 65 | 150 | 115 | 80 |
| 2 | – | – | – | 180 | 130 | 80 | 150 | 115 | 65 | 150 | 100 | 65 | |
| 3 | – | – | – | 215 | 150 | 100 | 180 | 130 | 80 | 165 | 130 | 80 | |
| 4 | – | – | – | 245 | 195 | 130 | 260 | 180 | 115 | 195 | 165 | 115 | |
| H | 1 | 345 | 260 | 165 | – | – | – | – | – | – | – | – | – |
| 2 | 310 | 230 | 130 | – | – | – | – | – | – | – | – | – | |
| As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||
| 5720 Series • Recommended Starting Speed [m/min] | |||||||||||||
| Qualità | MP91M | KCSM40 | SP6519 | X500 | |||||||||
| Spessore truciolo hex mm | Min | Max | Min | Max | Min | Max | Min | Max | |||||
| Gruppo materiali | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | Max | Valore Iniziale | Min | |
| P | 1 | 345 | 245 | 140 | 350 | 320 | 300 | 295 | 215 | 130 | 270 | 200 | 130 |
| 2 | 305 | 215 | 120 | 300 | 270 | 220 | 260 | 190 | 115 | 240 | 280 | 115 | |
| 3 | 270 | 190 | 105 | 280 | 240 | 195 | 230 | 165 | 100 | 210 | 155 | 100 | |
| 4 | 205 | 145 | 80 | 240 | 205 | 165 | 175 | 125 | 75 | 160 | 120 | 75 | |
| 5 | – | – | – | 200 | 180 | 160 | 140 | 105 | 70 | 130 | 100 | 70 | |
| 6 | – | – | – | 180 | 140 | 100 | 120 | 85 | 50 | 110 | 80 | 50 | |
| M | 1 | – | – | – | 260 | 210 | 185 | 270 | 195 | 115 | 250 | 185 | 115 |
| 2 | – | – | – | 235 | 180 | 145 | 235 | 170 | 105 | 220 | 160 | 100 | |
| 3 | – | – | – | 175 | 145 | 110 | 195 | 140 | 85 | 180 | 130 | 80 | |
| K | 1 | 365 | 255 | 145 | – | – | – | – | – | – | – | – | – |
| 2 | 285 | 200 | 115 | – | – | – | – | – | – | – | – | – | |
| 3 | 260 | 185 | 105 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 40 | 25 | 55 | 40 | 20 | 45 | 35 | 25 |
| 2 | – | – | – | 55 | 40 | 25 | 45 | 35 | 20 | 45 | 30 | 20 | |
| 3 | – | – | – | 65 | 45 | 30 | 55 | 40 | 25 | 50 | 40 | 25 | |
| 4 | – | – | – | 75 | 60 | 40 | 80 | 55 | 35 | 60 | 50 | 35 | |
| H | 1 | 105 | 80 | 50 | – | – | – | – | – | – | – | – | – |
| 2 | 95 | 70 | 40 | – | – | – | – | – | – | – | – | – | |
| As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||
| 5230 VS12 • Insert Selection Guide | ||||||
| Gruppo materiali | Lavorazione leggera | Uso generico | Lavorazione pesante | |||
| – | (Geometria leggera) | – | (Geometria robusta) | |||
| – | resistenza all’usura |  | tenacità | |||
| – | Geometria | Qualità | Geometria | Qualità | Geometria | Qualità |
| P1–P2 | .E..422 | SP6519 | .E..41 | SP6519 | .E..41 | SP6519 |
| P3–P4 | .E..423 | SP6519 | .E..423 | SP6519 | ...TN | MP91M |
| P5–P6 | .E..41 | SP6519 | .E..423 | SP6519 | ...TN | SP6519 |
| M1–M2 | .E..422 | KCSM40 | .E..41 | KCSM40 | .E..423 | KCSM40 |
| M3 | .E..423 | KCSM40 | .E..423 | KCSM40 | ...TN | KCSM40 |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..422 | X500 | .E..41 | KCSM40 | .E..423 | KCSM40 |
| S3 | .E..422 | KCSM40 | .E..423 | KCSM40 | .E..41 | KCSM40 |
| S4 | .E..41 | X500 | .E..423 | X500 | ...TN | X500 |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
ISO Catalogo
ANSI Catalogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?