Foratura
Foratura: Ingresso inclinato
Foratura: Uscita inclinata
Foratura: Foratura a pacco
Dimensioni utensile: 2 vani/4 margini/X/refrigerante
Foratura — Adduzione interna refrigerante
Codolo — Cilindrico liscio ≤h6
Angolo elica: 0°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 1201027 |
| ISO Catalog ID | K411A01875 |
| ANSI Catalog ID | K411A01875 |
| Qualità | KF1 |
| [D1] Diametro punta M | 4.762 mm |
| [D1] Diametro punta M | .1875 in |
| [L] Lunghezza complessiva | 74 mm |
| [L] Lunghezza complessiva | 2.913 in |
| [L3] Lunghezza del vano | 35.5 mm |
| [L3] Lunghezza del vano | 1.397 in |
| [L4] Profondità di foratura massima | 28.6 mm |
| [L4] Profondità di foratura massima | 1.126 in |
| [L5] Lunghezza punta | 1.11 mm |
| [L5] Lunghezza punta | .0437 in |
| [LS] Lunghezza del codolo | 36.5 mm |
| [LS] Lunghezza del codolo | 1.437 in |
| [D] Dia adattatore / stelo / foro | 4.763 mm |
| [D] Dia adattatore / stelo / foro | .1875 in |
ForaturaForatura: Ingresso inclinatoForatura: Uscita inclinataForatura: Foratura a paccoDimensioni utensile: 2 vani/4 margini/X/refrigeranteForatura — Adduzione interna refrigeranteCodolo — Cilindrico liscio ≤h6Angolo elica: 0°Drilling: Cross-Hole DrillingCrea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
| Tolerance • Metric | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| 0,001/0,009 | 0,000/-0,008 | |
| 0,001/0,010 | 0,000/-0,009 | |
| 0,001/0,012 | 0,000/-0,011 | |
| 0,002/0,015 | 0,000/-0,013 | |
| Tolerance • Inch | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| .0000/.0004 | .0000/-.0003 | |
| .0000/.0004 | .0000/-.0004 | |
| .0000/.0005 | .0000/-.0004 | |
| .0000/.0006 | .0000/-.0005 | |
| short | long | extra long | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Material |  |  | ||||||||||||
| Cutting Speed | Metric | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | |||
| K | 1 | 115 | 120 | 140 | mm/r | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/r | 0,12–0,25 | 0,13–0,29 | 0,16–0,35 | 0,20–0,42 | 0,26–0,50 | 0,32–0,57 | 0,36–0,69 | 0,42–0,82 | 0,59–0,96 |
| 2 | 200 | 250 | 300 | mm/r | 0,13–0,21 | 0,14–0,26 | 0,16–0,32 | 0,20–0,37 | 0,27–0,44 | 0,32–0,52 | 0,38–0,64 | 0,44–0,78 | 0,60–0,96 | |
| 3 | 100 | 150 | 300 | mm/r | 0,11–0,18 | 0,12–0,20 | 0,15–0,24 | 0,18–0,30 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 | |
| 4 | 100 | 170 | 250 | mm/r | 0,10–0,16 | 0,12–0,20 | 0,14–0,26 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,24–0,44 | 0,28–0,50 | |
| Material | | | ||||||||||||
| Material | Cutting Speed | Inch | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | 1/1 1.000 | |||
| K | 1 | 380 | 390 | 460 | IPR | .004–.008 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 |
| N | 1 | 330 | 820 | 1480 | IPR | .005–.010 | .005–.011 | .006–.014 | .008–.017 | .010–.020 | .013–.022 | .014–.027 | .017–.032 | .023–.038 |
| 2 | 660 | 820 | 980 | IPR | .005–.008 | .006–.010 | .006–.013 | .008–.015 | .011–.017 | .013–.021 | .015–.025 | .017–.031 | .024–.038 | |
| 3 | 330 | 490 | 980 | IPR | .004–.007 | .005–.008 | .006–.009 | .007–.012 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 | |
| 4 | 330 | 560 | 820 | IPR | .004–.006 | .005–.008 | .006–.010 | .006–.011 | .007–.013 | .008–.014 | .009–.016 | .009–.017 | .011–.020 | |
| | |||||||||||||
| Cutting Speed | Metric | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | ||
| K | 1 | 115 | 60 | 140 | mm/dev | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/dev | 0,16–0,25 | 0,19–0,29 | 0,23–0,35 | 0,27–0,42 | 0,31–0,50 | 0,36–0,57 | 0,44–0,69 | 0,52–0,82 | 0,62–0,96 |
| 2 | 200 | 100 | 300 | mm/dev | 0,15–0,23 | 0,17–0,28 | 0,21–0,34 | 0,25–0,39 | 0,30–0,46 | 0,34–0,54 | 0,42–0,67 | 0,52–0,82 | 0,61–0,96 | |
| 4 | 100 | 170 | 250 | mm/dev | 0,16–0,28 | 0,15–0,32 | 0,19–0,36 | 0,23–0,40 | 0,25–0,44 | 0,28–0,48 | 0,32–0,56 | 0,35–0,63 | 0,42–0,72 | |
I have read and accepted the Terms & Conditions of use
ISO Catalogo
ANSI Catalogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?