Country

Langue

Unité de mesure

Suggestions de produit

High-Feed copy milling cutter for multiple materials.

7792VXE16 Series • End Mill • Cylindrical Shank • Metric

Name: 7792VXE16 Series • End Mill • Cylindrical Shank • Metric
SKU: 109321439
Rating: 0 (0 reviews)

High-Feed copy milling cutter for multiple materials.

Features and benefits

Internal coolant supply.

Positive design to support low cutting forces and applications with long overhang.

Uses and application

Spiral Circular
Slotting: Shoulder
Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Usinage de poches
Lamage
Fraisage en plongée : Bout hémisphérique
Inclined Square End Mill

Guide de sélection des plaquettes • IC 12

7792 Series • IC16 • Insert Selection Guide
Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1-P2	...M41	KCPM40	...M41	KCPM40	...D41	KCPM40
P3-P4	...M41	KCPM40	…D	KCPM40	…D41	KCPM40
P5-P6	...M41	KCPM40	...D41	KCPM40	...D41	KCPM40
M1-M2	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
M3	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
K1-K2	…D	KCK15	…D	KCK15	…D	KCPK30
K3	…D	KCPK30	…D	KCPK30	…D	KCPK30
N1-N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1-S2	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
S3	KCSM40	SP6519	...D41	KCSM40	...D41	KCSM40
S4	KCSM40	SP6519	...D41	KCSM40	...D41	KCSM40
H1	…D	KC522M	…D	KC522M	…D	KC522M

7792 Series • IC16 • Recommended Starting Feeds [mm/th]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	DOC	30%			40–100%
	(mm)	L	M	H	L	M	H
.S..D	3,5	0,21	0,52	0,83	0,19	0,47	0,76
.S..D	2,5	0,24	0,61	0,97	0,22	0,55	0,89
.S..D	2	0,27	0,67	1,08	0,25	0,62	0,99
.E..D41	3,5	0,14	0,46	0,76	0,13	0,42	0,70
.E..D41	2,5	0,17	0,54	0,89	0,15	0,49	0,82
.E..D41	2	0,19	0,60	0,99	0,17	0,55	0,91
.E..M41	2,7	0,14	0,46	0,76	0,13	0,42	0,70
.E..M41	2	0,19	0,60	0,99	0,17	0,55	0,91
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds for Plunging [mm/th]
Kesici uç geometrisi	Diş başına programlanan ilerleme (fz)
	L	M	H
.S..D	0,10	0,25	0,41
.E..D41	0,07	0,23	0,38
.E..M41	0,07	0,23	0,38
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds [IPT]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	DOC	30%			40–100%
	(Inch)	L	M	H	L	M	H
.S..D	0.14	0.008	0.020	0.032	0.007	0.019	0.030
.S..D	0.1	0.009	0.024	0.038	0.009	0.022	0.035
.S..D	0.08	0.011	0.026	0.042	0.010	0.024	0.039
.E..D41	0.14	0.006	0.018	0.030	0.005	0.017	0.028
.E..D41	0.1	0.007	0.021	0.036	0.006	0.019	0.032
.E..D41	0.08	0.007	0.024	0.039	0.007	0.022	0.036
.E..M41	0.107	0.006	0.018	0.030	0.005	0.017	0.028
.E..M41	0.08	0.007	0.024	0.039	0.007	0.022	0.036
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds for Plunging [IPT]
Kesici uç geometrisi	Diş başına programlanan ilerleme (fz)
	L	M	H
.S..D	0.004	0.010	0.016
.E..D41	0.003	0.009	0.015
.E..M41	0.003	0.009	0.015
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Vitesses de départ recommandées [m/mn]

7792 Series IC16 • Recommended Starting Speed [m/min]
Kalite		KC522M			KCPK30			KCPM40			KCSM40			SC6525			SP6519			X400			X500
Talaş kalınlığı hex mm		Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	330	285	270	455	395	370	295	260	245	350	320	300	371	254	142	295	215	130	260	190	120	270	200	130
	2	275	240	200	280	255	230	250	215	180	300	270	220	325	225	121	260	190	115	230	170	105	240	280	115
	3	255	215	175	255	230	205	230	195	160	280	240	195	292	200	104	230	165	100	200	150	95	210	155	100
	4	225	185	150	225	185	160	205	170	135	240	205	165	208	145	79	175	125	75	150	110	70	160	120	75
	5	185	170	150	190	170	150	170	155	135	200	180	160	158	120	79	140	105	70	–	–	–	130	100	70
	6	165	125	100	160	135	110	150	115	90	180	140	100	142	100	58	120	85	50	–	–	–	110	80	50
M	1	205	180	165	205	185	155	195	170	155	260	210	185	192	154	121	270	195	115	–	–	–	250	185	115
	2	185	160	130	185	160	140	175	150	125	235	180	145	258	183	108	235	170	105	–	–	–	220	160	100
	3	140	120	95	145	130	115	130	115	90	175	145	110	208	150	92	195	140	85	–	–	–	180	130	80
K	1	230	205	185	295	265	240	–	–	–	–	–	–	392	271	146	–	–	–	–	–	–	–	–	–
	2	180	160	150	235	210	190	–	–	–	–	–	–	304	208	117	–	–	–	–	–	–	–	–	–
	3	150	135	120	195	175	160	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	40	35	25	–	–	–	40	35	30	50	40	25	–	–	–	55	40	20	–	–	–	45	35	25
	2	40	35	25	–	–	–	40	35	30	55	40	25	–	–	–	45	35	20	–	–	–	45	30	20
	3	50	40	25	–	–	–	50	40	30	65	45	30	–	–	–	55	40	25	–	–	–	50	40	25
	4	50	45	35	50	45	35	55	50	35	75	60	40	–	–	–	80	55	35	–	–	–	60	50	35
H	1	120	90	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	95	70	45	–	–	–
H	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	80	60	35	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

7792 Series IC16 • Recommended Starting Speed [SFM]
Kalite		KC522M			KCPK30			KCPM40			KCSM40			SC6525			SP6519			X400			X500
Chip Thickness hex Inch		Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	1085	935	885	1495	1295	1215	970	855	805	1150	1050	985	1217	833	458	970	705	425	855	625	395	885	655	425
	2	900	785	655	920	835	755	820	705	590	985	885	720	1067	742	396	855	625	375	755	560	345	785	920	375
	3	835	705	575	835	755	675	755	640	525	920	785	640	950	654	346	755	540	330	655	490	310	690	510	330
	4	740	605	490	740	605	525	675	560	445	785	675	540	692	475	258	575	410	245	490	360	230	525	395	245
	5	605	560	490	625	560	490	560	510	445	655	590	525	525	396	258	460	345	230	–	–	–	425	330	230
	6	540	410	330	525	445	360	490	375	295	590	460	330	458	329	196	395	280	165	–	–	–	360	260	165
M	1	675	590	540	675	605	510	640	560	510	855	690	605	625	508	396	885	640	375	–	–	–	820	605	375
	2	605	525	425	605	525	460	575	490	410	770	590	475	854	604	358	770	560	345	–	–	–	720	525	330
	3	460	395	310	475	425	375	425	375	295	575	475	360	692	492	296	640	460	280	–	–	–	590	425	260
K	1	755	675	605	970	870	785	–	–	–	–	–	–	1279	883	475	–	–	–	–	–	–	–	–	–
	2	590	525	490	770	690	625	–	–	–	–	–	–	1000	692	375	–	–	–	–	–	–	–	–	–
	3	490	445	395	640	575	525	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	130	115	80	–	–	–	130	115	100	165	130	80	–	–	–	180	130	65	–	–	–	150	115	80
	2	130	115	80	–	–	–	130	115	100	180	130	80	–	–	–	150	115	65	–	–	–	150	100	65
	3	165	130	80	–	–	–	165	130	100	215	150	100	–	–	–	180	130	80	–	–	–	165	130	80
	4	165	150	115	165	150	115	180	165	115	245	195	130	–	–	–	260	180	115	–	–	–	195	165	115
H	1	395	295	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	310	230	150	–	–	–
H	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	260	195	115	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

7792 Series IC16 • Ramping Application Data • Curved Edges • Metric
D1 maks	Rampalama açısı (°)	a_e maks dalma	Yüzey frezeleme kanalı ölçüsü	DH min [mm] - (min hole diameter)	DH min (minumum delik çapı)
40	2.55°	13	16,3	50	78
50	1.36°	13	26,1	70	98
52	1.24°	13	28	74	102
63	0.86°	13	39	96	124
66	0.8°	13	41,9	102	130
80	0.58°	13	55,9	130	158
100	0.42°	13	75,9	170	198
125	0.32°	13	100,9	220	248
160	0.23°	13	135,8	290	318
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Metric
D1 maks	Rampalama açısı (°)	a_e maks dalma	Yüzey frezeleme kanalı ölçüsü	DH min [mm] - (min hole diameter)	DH min (minumum delik çapı)
40	3.7°	12,3	17,85	50	78
50	2.25°	12,3	27,72	70	98
52	1.65°	12,3	29,82	74	102
63	1.4°	12,3	40,8	96	124
66	1.3°	12,3	43,7	102	130
80	0.8°	12,3	57,7	130	158
100	0.65°	12,3	77,53	170	198
125	0.5°	12,3	102,5	220	248
160	0.27°	12,3	137,46	290	318
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Programing Data • Curved Edges • Metric [mm]
IC	Köşe radyüsu	R	L
06	0,8	1,37	0,4
09	0,8	2,01	0,73
	1,2	2,27	0,67
12	0,8	2,5	1,02
	1,2	2,73	0,97
16	1,2	4,18	1,46
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Metric [mm]
IC	Köşe radyüsu	R	L
06	0,8	1,46	0,529
09	0,8	2,13	1,025
	1,2	2,25	0,95
12	0,8	2,46	1,33
	1,2	2,79	1,27
	2	3,42	1,13
16	1,2	3,56	1,82
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0,8mm.

7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Inch
D1 maks	Rampalama açısı (°)	a_e maks dalma	Yüzey frezeleme kanalı ölçüsü	DH min [Inch] - (min hole diameter)	DH min (minumum delik çapı)
1.5	4.53°	0.484	0.628	1.818	2.921
2.0	2.44°	0.484	1.122	2.818	3.921
2.5	1.51°	0.484	1.626	3.818	4.921
3.0	0.96°	0.484	2.122	4.818	5.921
4.0	0.62°	0.484	3.114	6.818	7.921
5.0	0.52°	0.484	4.114	8.818	9.921
6.0	0.32°	0.484	5.115	10.818	11.921
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Ramping Application Data • Curved Edges • Inch
D1 maks	Rampalama açısı (°)	a_e maks dalma	Yüzey frezeleme kanalı ölçüsü	DH min [Inch] - (min hole diameter)	DH min (minumum delik çapı)
1.5	3°	0.512	0.55	1.818	2.921
2.0	2.85°	0.512	1.05	2.818	3.921
2.5	1°	0.512	1.56	3.818	4.921
3.0	0.58°	0.512	1.96	4.818	5.921
4.0	0.51°	0.512	2.96	6.818	7.921
5.0	0.37°	0.512	3.96	8.818	9.921
6.0	0.27°	0.512	4.96	10.818	11.921
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Programing Data • Curved Edges • Inch [inch]
IC	Köşe radyüsu	R	L
06	0.031	0.057	0.016
09	0.031	0.079	0.028
	0.047	0.089	0.026
12	0.031	0.098	0.040
	0.047	0.107	0.038
16	0.047	0.164	0.057
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Inch [inch]
IC	Köşe radyüsu	R	L
06	0.031	0.057	0.021
09	0.031	0.084	0.040
	0.047	0.088	0.037
12	0.031	0.097	0.052
	0.047	0.109	0.050
	0.079	0.134	0.044
16	0.047	0.140	0.072
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0.031".

Bienvenue

Veuillez confirmer vos préférences

Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Contacter l'équipe commerciale

Contacter l'équipe commerciale

Édition de la Solution

Ajout de Solution

7792VXE16 Series • End Mill • Cylindrical Shank • Metric

High-Feed copy milling cutter for multiple materials.

Features and benefits

Uses and application

Guide de sélection des plaquettes • IC 12

Vitesses de départ recommandées [m/mn]

Suggestions de produit

Product Family suggestions

Contacter l'équipe commerciale

Notifications

Contacter l'équipe commerciale

Sending to {{cadTool}} in progress...

7792VXE16 Series • End Mill • Cylindrical Shank • Metric

High-Feed copy milling cutter for multiple materials.

Features and benefits

Uses and application

Guide de sélection des plaquettes • IC 12

Vitesses de départ recommandées [m/mn]

The following files are available