Helix Angle: 37°/39°
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Dimensions de l'outil : Configuration des goujures : 6 
Corner Style: Ball NoseDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 6072145 |
| Ref. ISO Catalogue | UJBV0500Y6CN |
| Ref. ANSI Catalogue | UJBV0500Y6CN |
| Nuance | KCSM15 |
| Style adaptateur du côté machine | DUO-LOCK |
| [D] Adaptateur / Queue / Diamètre d’alésage | 12.2 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .4803 in |
| [AP1MAX] 1re profondeur de coupe maximale | 19.05 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .75 in |
| [L1] Longueur de référence | 28.6 mm |
| [L1] Longueur de référence | 1.126 in |
| [CSMS] Dimension du système Côté machine | DL12 |
| [WF] Largeur du méplat | 9.5 mm |
| [WF] Largeur du méplat | .374 in |
| [Z] Nombre de goujures | 6 |
| [D1] Diamètre effectif de coupe | 12.7 mm |
| [D1] Diamètre effectif de coupe | .5 in |
Helix Angle: 37°/39°Fraisage de côté/avec épaulement : Bout hémisphériqueProfilage 3DDimensions de l'outil : Configuration des goujures : 6 Corner Style: Ball NoseGrades
KCSM15
Nuance de carbure avec revêtement PVD épais dont la composition chimique et le procédé ont été optimisés pour une meilleure résistance à l'usure. Protection exceptionnelle dans le fraisage de l'acier inoxydable pour réduire la formation de cratères, l'usure en dépouille et l'entaille à la profondeur de coupe. Excellentes performances jusqu'à 52 HRC.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Tolérances pour les fraises | |
| D1 | Tolérance e8 |
| 13/32 | -0,00126"/-0,00232" |
| 23/32 | -0,00157"/-0,00287" |
| -0,00197''/-0,00350'' | |
| Groupe Matières |  |  | ||||||||||||||||
| Fraisage en bout (A) | court | moyen | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||||
| A | adaptateur | Diamètre | ||||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | ||||||||||||||||
| Vitesse de coupe | Vitesse de coupe | Vitesse de coupe | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||||
| ap | ae | Mini | Maxi | Mini | Maxi | Mini | Maxi | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | |||||
| P | 0 | Ap max | 0.4 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 |
| 1 | Ap max | 0.4 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | |
| 2 | Ap max | 0.4 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | |
| 3 | Ap max | 0.4 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | |
| 4 | Ap max | 0.4 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | |
| 5 | Ap max | 0.4 x D | 200 | – | 330 | 170 | – | 280.5 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | |
| 6 | Ap max | 0.4 x D | 160 | – | 250 | 136 | – | 212.5 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | |
| M | 1 | Ap max | 0.4 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 |
| 2 | Ap max | 0.4 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | |
| 3 | Ap max | 0.4 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | |
| K | 1 | Ap max | 0.4 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 |
| 2 | Ap max | 0.4 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | |
| 3 | Ap max | 0.4 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | |
| S | 1 | Ap max | 0.4 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 |
| 2 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | |
| 3 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | |
| 4 | Ap max | 0.4 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0030 | |
| H | 1 | Ap max | 0.4 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 |
| 2 | Ap max | 0.4 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | |
| Groupe Matières | | | ||||||||||||||||
| Fraisage en bout (A) | court | moyen | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||||
| A | adaptateur | Diamètre | ||||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | ||||||||||||||||
| Vitesse de coupe | Vitesse de coupe | Vitesse de coupe | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||||
| ap | ae | Mini | Maxi | Mini | Maxi | Mini | Maxi | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | |||||
| P | 0 | Ap max | 0.06 x D | 940 | – | 1250 | 846 | – | 1125 | 846 | – | 1125 | IPT | .0028 | .0035 | .0040 | .0045 | .0050 |
| 1 | Ap max | 0.06 x D | 940 | – | 1250 | 846 | – | 1125 | 846 | – | 1125 | IPT | .0028 | .0035 | .0040 | .0045 | .0050 | |
| 2 | Ap max | 0.06 x D | 870 | – | 1180 | 783 | – | 1062 | 783 | – | 1062 | IPT | .0028 | .0035 | .0040 | .0045 | .0050 | |
| 3 | Ap max | 0.06 x D | 750 | – | 1000 | 675 | – | 900 | 675 | – | 900 | IPT | .0023 | .0029 | .0035 | .0039 | .0049 | |
| 4 | Ap max | 0.06 x D | 560 | – | 940 | 504 | – | 846 | 504 | – | 846 | IPT | .0021 | .0026 | .0031 | .0034 | .0041 | |
| 5 | Ap max | 0.06 x D | 370 | – | 620 | 314.5 | – | 527 | 296 | – | 496 | IPT | .0019 | .0024 | .0028 | .0031 | .0040 | |
| 6 | Ap max | 0.06 x D | 310 | – | 470 | 263.5 | – | 399.5 | 248 | – | 376 | IPT | .0016 | .0020 | .0023 | .0025 | .0029 | |
| M | 1 | Ap max | 0.06 x D | 560 | – | 720 | 448 | – | 576 | 392 | – | 504 | IPT | .0023 | .0029 | .0035 | .0039 | .0049 |
| 2 | Ap max | 0.06 x D | 370 | – | 500 | 296 | – | 400 | 259 | – | 350 | IPT | .0019 | .0024 | .0028 | .0031 | .0040 | |
| 3 | Ap max | 0.06 x D | 370 | – | 440 | 296 | – | 352 | 259 | – | 308 | IPT | .0016 | .0020 | .0023 | .0025 | .0029 | |
| K | 1 | Ap max | 0.06 x D | 750 | – | 940 | 675 | – | 846 | 675 | – | 846 | IPT | .0028 | .0035 | .0040 | .0045 | .0050 |
| 2 | Ap max | 0.06 x D | 690 | – | 870 | 621 | – | 783 | 621 | – | 783 | IPT | .0023 | .0029 | .0035 | .0039 | .0049 | |
| 3 | Ap max | 0.06 x D | 690 | – | 810 | 621 | – | 729 | 621 | – | 729 | IPT | .0019 | .0024 | .0028 | .0031 | .0040 | |
| S | 1 | Ap max | 0.06 x D | 310 | – | 560 | 248 | – | 448 | 186 | – | 336 | IPT | .0023 | .0029 | .0035 | .0039 | .0049 |
| 2 | Ap max | 0.06 x D | 160 | – | 250 | 128 | – | 200 | 96 | – | 150 | IPT | .0012 | .0016 | .0019 | .0021 | .0027 | |
| 3 | Ap max | 0.06 x D | 160 | – | 250 | 128 | – | 200 | 96 | – | 150 | IPT | .0012 | .0016 | .0019 | .0021 | .0027 | |
| 4 | Ap max | 0.06 x D | 310 | – | 370 | 248 | – | 296 | 186 | – | 222 | IPT | .0017 | .0022 | .0026 | .0029 | .0036 | |
| H | 1 | Ap max | 0.06 x D | 500 | – | 870 | 400 | – | 696 | 300 | – | 522 | IPT | .0021 | .0026 | .0031 | .0034 | .0041 |
| 2 | Ap max | 0.06 x D | 440 | – | 750 | 352 | – | 600 | 264 | – | 450 | IPT | .0016 | .0020 | .0023 | .0025 | .0029 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?