Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias

Sugerencias de productos

Product Family suggestions

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Pedido rápido
Artículo(s) añadido correctamente al carrito
Ver carrito

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Artículo(s) añadido correctamente al carrito
Ver carrito
Exit Search Volver a la solución

Edición de la solución

Añadiendo solución

Nombre de la solución:{{SolutionName}}

    Producto similar a:

    Volver a | Modificación Similar a

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric

    Cuerpos Drill Fix™ DFR™

    Número de material100003979

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Open expanded view
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Representación general
    Póngase en contacto con nuestro equipo de ventas para descubrir todas sus opciones de precios

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
    • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
    • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
    • Drill shipped with insert screws and Torx wrench.
    • TaladradoTaladrado
    • Taladrado: Entrada inclinadaTaladrado: Entrada inclinada
    • Taladrado: Salida inclinadaTaladrado: Salida inclinada
    • Taladrado: Salto XTaladrado: Salto X
    • Taladrado: ConvexoTaladrado: Convexo
    • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
    • Con refrigeración interna: Radial: Fresado intercambiableCon refrigeración interna: Radial: Fresado intercambiable
    • Taladrado: CiegoTaladrado: Ciego
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    ADVERTENCIA • Drill Fix DFR

    ADVERTENCIA Durante las operaciones de orificio pasante, se produce un disco o una arandela a medida que la herramienta corta la pieza de trabajo. Cuando la broca está fija y la pieza de trabajo está rotando, puede que la fuerza centrífuga expulse con fuerza dicha arandela del mandril. Proporcione un blindaje adecuado para proteger a quienes circulan cerca de la máquina.

    Dimensions • Mango DFR Whistle Notch (WD)

    DLS
    2045
    2545
    3258

    Dimensions • Mango DFR Weldon® • DIN 1835-1 Forma B

    DLS
    2050
    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx.ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    1SIMDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    1UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    1UIMDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    1IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    1IIMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    2SILDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    2UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    2UILDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    2IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2IILDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    3SILDKC7140260285320mm/r0,09–0,150,11–0,180,15–0,25
    3UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    3UILDKC7140180195220mm/r0,09–0,150,11–0,180,15–0,25
    3IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    3IILDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    4SILDKC7140220250300mm/r0,09–0,150,11–0,180,15–0,25
    4UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    4UILDKC7140150180220mm/r0,09–0,150,11–0,180,15–0,25
    4IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    4IILDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    5SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    5UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    5UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    5IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    5IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    6SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    6UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    6UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    6IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/r0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/r0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/r0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/r0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/r0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx. Ø DFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1SIMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2SIMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3SIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3UIMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    5SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOGDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    IGDKCU40
    IOGDKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    IGDKMF
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx. Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1SILDKCU40200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1UILDKC7140120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    1IILDKC714080100125mm/tr0,10–0,180,12–0,200,14–0,24
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    2IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    K1SOGDKCPK10200240300mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/r0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/r0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/r0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/r0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/r0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/r0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    IHPKCU40
    IOHPKMF200300400mm/r0,07-0,090,10-0,140,12-0,16
    IHPKMF
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx. Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1UILDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    1IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2SISTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    2IILDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3SISTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    3IILDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    4IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6UIHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6IOHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    6IIHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR02... 12,50 16,00mmDFR03... 16,50 20,00mmDFR04... 20,50 24,00mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx. Ø DFR02... 12,50-16,00 mmDFR03... 16,50-20,00 mmDFR04... 20,50-24,00 mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1SILDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    1UILDKC7140405060mm/r0,04–0,060,05–0,080,06–0,10
    1IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2SILDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    2UILDKC7140304050mm/r0,04–0,060,05–0,080,06–0,10
    2IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    3UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    3IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    3IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    4UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    4IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10

    DFR™ • PCD • Sistema métrico

    Sistema métrico
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango m/min
    MínValor inicialMáx.ØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782mm/r0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723mm/r0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841mm/r0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864mm/r0,06–0,08
    ISTKD1425
    Pulgadas
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadVelocidad de corte vcAvance recomendado (fz) por diámetro
    Rango SFM
    MínValor inicialMáx.ØDFR04 0.813"–1.00"
    N1SOSTKD1425130023622760IPR0.002–0.003
    ISTKD1425
    2SOSTKD1425120921972567IPR0.005–0.007
    ISTKD1425
    3SOSTKD1425111820322374IPR0.005–0.007
    ISTKD1425
    4SOSTKD1425156023622760IPR0.005–0.007
    ISTKD1425
    5SOSTKD1425157523622834IPR0.002–0.003
    ISTKD1425
    Sistema métrico
    Velocidad de corte vc
    Rango m/minAvance recomendado (fz) por diámetro
    Grupo de materialesCondiciónAsiento de alojamientoGeometríaCalidadMínValor inicialMáx.ØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
    Select the destination where you want to move a.
    Nuevo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Introduzca un nombre válido
    product-image
    Please adjust the following properties from

    ISO catálogo

    ANSI catálogo

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Debe iniciar sesión para ver la información de su panel de control
    Session expired due to inactivity, please login again
    El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
    artículo(s) añadido(s) correctamente al carrito
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO catálogo Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk