Producto similar a:
K105 (~5 x D) • K10 • Mango A • Brocas TF
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Número de material100003651
Features and benefits
- TF drills without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.
- Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drills.
- Three spacious flutes for rapid chip evacuation.
- Three-margin lands deliver better hole quality and straightness than two-flute drills.
- TiAlN-coated KC7210™ grade for higher wear resistance at elevated speeds.
- Uncoated K10™ grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.
- Taladrado
- Taladrado: Salida inclinada
- Refrigerante para caudal: Taladrado
- Mango — Liso cilíndrico ≤h6
- Ángulo de la hélice: 30°
- Profundidad de taladrado: 5x
- Drilling: Cross-Hole Drilling
Tolerancia • Pulgadas | ||
gama de tamaños nominales | D1 tolerancia m7 | D tolerancia h6 |
.0002/.0006 | .0000/-.0003 | |
.0002/.0008 | .0000/-.0004 | |
.0003/.0010 | .0000/-.0004 | |
.0003/.0011 | .0000/-.0005 |
Tolerancia • Sistema métrico | ||
gama de tamaños nominales | D1 tolerancia m7 | D tolerancia h6 |
0,004/0,016 | 0,000/-0,008 | |
0,006/0,021 | 0,000/-0,009 | |
0,007/0,025 | 0,000/-0,011 | |
0,008/0,029 | 0,000/-0,013 |
Brocas TF • Serie B105 • Calidad K10™ • Refrigerante para caudal • Diámetros de broca de 0.1181–0.7874″ • Pulgadas
Grupo de materiales | |||||||||||||
Velocidad de corte | Sistema métrico | ||||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
K | 1 | 60 | 85 | 110 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 70 | 90 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 50 | 70 | mm/r | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,02–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/r | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | 0,03–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 250 | 250 | mm/r | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
3 | 100 | 180 | 400 | mm/r | 0,09–0,16 | 0,10–0,20 | 0,12–0,26 | 0,16–0,36 | 0,20–0,40 | 0,24–0,45 | 0,30–0,50 | 0,34–0,60 | |
4 | 60 | 170 | 250 | mm/r | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 20 | 20 | 50 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Grupo de materiales | |||||||||||||
Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
K | 1 | 200 | 280 | 360 | IPR | 0.004–0.008 | 0.005–0.008 | 0.006–0.011 | 0.008–0.014 | 0.009–0.017 | 0.009–0.020 | 0.011–0.024 | 0.012–0.027 |
2 | 230 | 230 | 300 | IPR | 0.004–0.008 | 0.005–0.008 | 0.006–0.011 | 0.008–0.014 | 0.009–0.017 | 0.009–0.020 | 0.011–0.024 | 0.012–0.027 | |
3 | 160 | 160 | 230 | IPR | 0.004–0.007 | 0.004–0.007 | 0.006–0.010 | 0.007–0.013 | 0.001–0.016 | 0.009–0.019 | 0.010–0.023 | 0.011–0.026 | |
N | 1 | 330 | 690 | 1340 | IPR | 0.004–0.006 | 0.004–0.008 | 0.007–0.013 | 0.008–0.015 | 0.010–0.017 | 0.001–0.020 | 0.017–0.023 | 0.025–0.031 |
2 | 330 | 820 | 820 | IPR | 0.004–0.008 | 0.005–0.008 | 0.007–0.013 | 0.010–0.017 | 0.012–0.020 | 0.014–0.023 | 0.017–0.029 | 0.021–0.035 | |
3 | 330 | 590 | 1310 | IPR | 0.004–0.006 | 0.004–0.008 | 0.005–0.010 | 0.006–0.014 | 0.008–0.016 | 0.009–0.018 | 0.012–0.020 | 0.013–0.024 | |
4 | 200 | 560 | 820 | IPR | 0.003–0.006 | 0.005–0.007 | 0.007–0.013 | 0.008–0.014 | 0.009–0.015 | 0.013–0.018 | 0.015–0.019 | 0.023–0.030 | |
S | 4 | 70 | 70 | 160 | IPR | 0.001–0.002 | 0.002–0.003 | 0.003–0.004 | 0.004–0.005 | 0.004–0.006 | 0.005–0.007 | 0.007–0.009 | 0.009–0.012 |
Velocidad de corte | Sistema métrico | ||||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
K | 1 | 60 | 85 | 110 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 72 | 90 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 51 | 70 | mm/dev | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | ,020–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/dev | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | ,033–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 248 | 250 | mm/dev | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
4 | 60 | 173 | 250 | mm/dev | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 30 | 20 | 51 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Grupo de materiales | |||||||||||||
Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
S | 4 | 70 | 100 | 160 | IPR | – | – | 0.001–0.003 | 0.001–0.003 | 0.001–0.003 | 0.003–0.006 | 0.003–0.006 | – |
Grupo de materiales | |||||||||||||
Velocidad de corte | Sistema métrico | ||||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
S | 4 | 20 | 30 | 50 | mm/r | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
Velocidad de corte | Sistema métrico | ||||||||||||
Rango | Avance recomendado (f) por diámetro | ||||||||||||
Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
S | 4 | 20 | 30 | 50 | mm/dev | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |