Spiral Circular
Face Milling
Helical Milling
Ramping: Blank
Shank - Cylindrical Plain
Milling - Through Coolant
Pocketing
Counter Boring
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5672804 |
| ISO katalogové ID | C7713VR10CA1.25Z4R2.7 |
| ANSI katalogové ID | C7713VR10CA1.25Z4R2.7 |
| [D1MAX] Maximum Cutting Diameter | 31.75 mm |
| [D1MAX] Maximum Cutting Diameter | 1.25 in |
| [D1] Effective Cutting Diameter | 21.75 mm |
| [D1] Effective Cutting Diameter | .8563 in |
| [D] Adapter / Shank / Bore Diameter | 31.74 mm |
| [D] Adapter / Shank / Bore Diameter | 1.25 in |
| [L] Overall Length | 250 mm |
| [L] Overall Length | 9.842 in |
| [L2] Head Length | 70 mm |
| [L2] Head Length | 2.755 in |
| [AP1MAX] 1st Maximum Cutting Depth | 5 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .1969 in |
| Number of Inserts | 4 |
Spiral CircularFace MillingHelical MillingRamping: BlankShank - Cylindrical PlainMilling - Through CoolantPocketingCounter BoringInclined Square End MillVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
| P3–P4 | 422-X8 | SP6519 | 432-X5 | SP6519 | 422-X4 | SP6519 |
| P5–P6 | 422-X8 | SP6519 | T-X4 | SP6519 | T-X4 | X500 |
| M1–M2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
| M3 | 422-X8 | X700 | 432-X5 | SP6519 | 422-X4 | X500 |
| K1–K2 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
| K3 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
| N1–N2 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| N3 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| S1–S2 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| S3 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| S4 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,12 | 0,19 | 0,26 | 0,08 | 0,13 | 0,18 | 0,06 | 0,10 | 0,14 | 0,05 | 0,09 | 0,12 | 0,05 | 0,08 | 0,11 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 422–X4 | 0,12 | 0,29 | 0,57 | 0,08 | 0,21 | 0,40 | 0,06 | 0,16 | 0,30 | 0,05 | 0,14 | 0,26 | 0,05 | 0,13 | 0,24 | 422–X4 |
| T–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,13 | 0,21 | 0,30 | 0,10 | 0,15 | 0,21 | 0,07 | 0,12 | 0,16 | 0,06 | 0,10 | 0,14 | 0,06 | 0,09 | 0,13 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 432–X5 |
| 422–X4 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 422–X4 |
| T–X4 | 0,27 | 0,48 | 0,77 | 0,19 | 0,34 | 0,55 | 0,14 | 0,25 | 0,41 | 0,13 | 0,22 | 0,35 | 0,12 | 0,20 | 0,32 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,16 | 0,26 | 0,36 | 0,12 | 0,19 | 0,26 | 0,09 | 0,14 | 0,19 | 0,08 | 0,12 | 0,17 | 0,07 | 0,11 | 0,15 | 701–X4 |
| 422–X8 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X8 |
| 432–X5 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 432–X5 |
| 422–X4 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X4 |
| T–X4 | 0,33 | 0,58 | 0,94 | 0,23 | 0,42 | 0,67 | 0,18 | 0,31 | 0,49 | 0,15 | 0,27 | 0,43 | 0,14 | 0,25 | 0,39 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,14 | 0,23 | 0,32 | 0,10 | 0,17 | 0,23 | 0,08 | 0,13 | 0,17 | 0,07 | 0,11 | 0,15 | 0,06 | 0,10 | 0,14 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 432–X5 |
| 422–X4 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 422–X4 |
| T–X4 | 0,29 | 0,52 | 0,84 | 0,21 | 0,37 | 0,59 | 0,16 | 0,28 | 0,44 | 0,14 | 0,24 | 0,38 | 0,13 | 0,22 | 0,35 | T–X4 |
| Light | General | Heavy |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .011 | .015 | .004 | .008 | .011 | .003 | .006 | .008 | .002 | .005 | .007 | .002 | .005 | .006 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 432–X5 |
| 422–X4 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 422–X4 |
| T–X4 | .011 | .018 | .029 | .008 | .013 | .020 | .006 | .010 | .015 | .005 | .008 | .013 | .005 | .008 | .012 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| – | 5% | 10% | 20% | 30% | 40–100% | |||||||||||
| 701–X4 | .006 | .013 | .018 | .005 | .009 | .013 | .003 | .007 | .010 | .003 | .006 | .008 | .003 | .006 | .008 | 701–X4 |
| 422–X8 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X8 |
| 432–X5 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 432–X5 |
| 422–X4 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X4 |
| T–X4 | .013 | .022 | .035 | .009 | .016 | .025 | .007 | .012 | .018 | .006 | .010 | .016 | .006 | .009 | .015 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .006 | .012 | .016 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 432–X5 |
| 422–X4 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 422–X4 |
| T–X4 | .011 | .019 | .031 | .008 | .014 | .022 | .006 | .010 | .016 | .005 | .009 | .014 | .005 | .008 | .013 | T–X4 |
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .009 | .013 | .003 | .007 | .009 | .002 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 422–X4 | .005 | .012 | .023 | .003 | .008 | .016 | .002 | .006 | .012 | .002 | .006 | .010 | .002 | .005 | .010 | 422–X4 |
| T–X4 | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .011 | T–X4 |
| Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 130 | 213 | 295 | 140 | 228 | 315 | 130 | 200 | 270 | 140 | 243 | 345 | 140 | 255 | 370 |
| 2 | – | – | – | – | – | – | 115 | 188 | 260 | 120 | 198 | 275 | 115 | 178 | 240 | 120 | 213 | 305 | 120 | 223 | 325 | |
| 3 | – | – | – | – | – | – | 100 | 165 | 230 | 105 | 175 | 245 | 100 | 155 | 210 | 105 | 188 | 270 | 105 | 198 | 290 | |
| 4 | – | – | – | – | – | – | 75 | 125 | 175 | 80 | 135 | 190 | 75 | 118 | 160 | 80 | 143 | 205 | 80 | 145 | 210 | |
| 5 | – | – | – | 70 | 103 | 135 | 70 | 105 | 140 | 70 | 110 | 150 | 70 | 100 | 130 | – | – | – | 80 | 120 | 160 | |
| 6 | – | – | – | 50 | 83 | 115 | 50 | 85 | 120 | 50 | 90 | 130 | 50 | 80 | 110 | – | – | – | 60 | 100 | 140 | |
| M | 1 | – | – | – | 115 | 188 | 260 | 115 | 193 | 270 | 120 | 200 | 280 | 115 | 183 | 250 | – | – | – | 120 | 205 | 290 |
| 2 | – | – | – | 105 | 168 | 230 | 105 | 170 | 235 | 110 | 180 | 250 | 100 | 160 | 220 | – | – | – | 110 | 185 | 260 | |
| 3 | – | – | – | 85 | 138 | 190 | 85 | 140 | 195 | 90 | 145 | 200 | 80 | 130 | 180 | – | – | – | 90 | 150 | 210 | |
| K | 1 | 135 | 213 | 290 | – | – | – | 140 | 218 | 295 | 145 | 238 | 330 | 120 | 200 | 280 | 145 | 255 | 365 | 145 | 268 | 390 |
| 2 | 120 | 183 | 245 | – | – | – | 110 | 175 | 240 | 115 | 185 | 255 | 105 | 155 | 205 | 115 | 200 | 285 | 115 | 210 | 305 | |
| 3 | 115 | 158 | 200 | – | – | – | 100 | 160 | 220 | 105 | 170 | 235 | 95 | 133 | 170 | 105 | 183 | 260 | – | – | – | |
| N | 1–2 | 400 | 1725 | 3050 | – | – | – | – | – | – | 400 | 1648 | 2895 | – | – | – | – | – | – | – | – | – |
| 3 | 295 | 1368 | 2440 | – | – | – | – | – | – | 295 | 1308 | 2320 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 23 | 38 | 52 | 23 | 39 | 55 | 24 | 44 | 63 | 23 | 36 | 48 | – | – | – | – | – | – |
| 2 | – | – | – | 22 | 34 | 46 | 22 | 35 | 48 | 23 | 38 | 52 | 21 | 33 | 44 | – | – | – | – | – | – | |
| 3 | – | – | – | 25 | 39 | 53 | 25 | 40 | 55 | 26 | 43 | 59 | 24 | 38 | 51 | – | – | – | – | – | – | |
| 4 | – | – | – | 36 | 56 | 75 | 36 | 58 | 79 | 37 | 61 | 84 | 35 | 54 | 73 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 50 | 75 | 100 | – | – | – | 50 | 78 | 105 | 50 | 80 | 110 |
| Material Group | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 426 | 697 | 968 | 459 | 746 | 1033 | 426 | 656 | 886 | 459 | 795 | 1132 | 459 | 836 | 1214 |
| 2 | – | – | – | – | – | – | 377 | 615 | 853 | 394 | 648 | 902 | 377 | 582 | 787 | 394 | 697 | 1000 | 394 | 730 | 1066 | |
| 3 | – | – | – | – | – | – | 328 | 541 | 754 | 344 | 574 | 804 | 328 | 508 | 689 | 344 | 615 | 886 | 344 | 648 | 951 | |
| 4 | – | – | – | – | – | – | 246 | 410 | 574 | 262 | 443 | 623 | 246 | 385 | 525 | 262 | 467 | 672 | 262 | 476 | 689 | |
| 5 | – | – | – | 230 | 338 | 443 | 246 | 410 | 574 | 230 | 361 | 492 | 230 | 328 | 426 | – | – | – | 262 | 394 | 525 | |
| 6 | – | – | – | 164 | 272 | 377 | 230 | 344 | 459 | 164 | 295 | 426 | 164 | 262 | 361 | – | – | – | 197 | 328 | 459 | |
| M | 1 | – | – | – | 377 | 615 | 853 | 377 | 631 | 886 | 394 | 656 | 918 | 377 | 599 | 820 | – | – | – | 394 | 672 | 951 |
| 2 | – | – | – | 344 | 549 | 754 | 344 | 558 | 771 | 361 | 590 | 820 | 328 | 525 | 722 | – | – | – | 361 | 607 | 853 | |
| 3 | – | – | – | 279 | 451 | 623 | 279 | 459 | 640 | 295 | 476 | 656 | 262 | 426 | 590 | – | – | – | 295 | 492 | 689 | |
| K | 1 | 443 | 697 | 951 | – | – | – | 459 | 713 | 968 | 476 | 779 | 1082 | 394 | 656 | 918 | 476 | 836 | 1197 | 476 | 877 | 1279 |
| 2 | 394 | 599 | 804 | – | – | – | 361 | 574 | 787 | 377 | 607 | 836 | 344 | 508 | 672 | 377 | 656 | 935 | 377 | 689 | 1000 | |
| 3 | 377 | 517 | 656 | – | – | – | 328 | 525 | 722 | 344 | 558 | 771 | 312 | 435 | 558 | 344 | 599 | 853 | – | – | – | |
| N | 1–2 | 1312 | 5658 | 10004 | – | – | – | – | – | – | 1312 | 5404 | 9496 | – | – | – | – | – | – | – | – | – |
| 3 | 968 | 4485 | 8003 | – | – | – | – | – | – | 968 | 4289 | 7610 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 75 | 123 | 171 | 75 | 128 | 180 | 79 | 143 | 207 | 75 | 116 | 157 | – | – | – | – | – | – |
| 2 | – | – | – | 72 | 112 | 151 | 72 | 115 | 157 | 75 | 123 | 171 | 69 | 107 | 144 | – | – | – | – | – | – | |
| 3 | – | – | – | 82 | 128 | 174 | 82 | 131 | 180 | 85 | 139 | 194 | 79 | 123 | 167 | – | – | – | – | – | – | |
| 4 | – | – | – | 118 | 182 | 246 | 118 | 189 | 259 | 121 | 198 | 276 | 115 | 177 | 239 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 164 | 246 | 328 | – | – | – | 164 | 254 | 344 | 164 | 262 | 361 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?