Slotting: Side with AE/AP dimensionsDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 1244389 |
| ISO katalogové ID | 4.96082-204 |
| ANSI katalogové ID | 4.96082-204 |
| [D1] Effective Cutting Diameter | 80 mm |
| [D1] Effective Cutting Diameter | 3.149 in |
| [D] Adapter / Shank / Bore Diameter | 27 mm |
| [D] Adapter / Shank / Bore Diameter | 1.063 in |
| [D6] Hub Diameter | 45 mm |
| [D6] Hub Diameter | 1.771 in |
| [BM] Cutting Width Minimum | 4 mm |
| [BM] Cutting Width Minimum | .1575 in |
| [CDX] Radial Maximum Depth of Cut | 15 mm |
| [CDX] Radial Maximum Depth of Cut | .5906 in |
| [THUB] Hub Thickness | 12 mm |
| [THUB] Hub Thickness | .4724 in |
| Number of Inserts | 10 |
| Number of Effective Cutting Edges on Face | 5 |
| Gage Insert | SNHX1102___ |
| Weight Kilograms | 0.3 |
Slotting: Side with AE/AP dimensionsVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .T..GP | KCPM40 | .T..GP | KCPM40 | ..T | KCPM40 |
| P3–P4 | .T..GP | KCPK30 | .T..GP | KCPM40 | ..T | KCPM40 |
| P5–P6 | .T..GP | KCPK30 | ..T | KCPK30 | ..T | KCPM40 |
| M1–M2 | .T..GP | KC725M | .T..GP | KC725M | ..T | KC725M |
| M3 | .T..GP | KCPM40 | .T..GP | KCPM40 | ..T | KCPM40 |
| K1–K2 | ..T | KC520M | ..T | KC520M | ..T | KC520M |
| K3 | .T..GP | KCPK30 | .T..GP | KCPK30 | ..T | KCPK30 |
| N1–N2 | .F..GE | KC510M | .F..GE | KC510M | .T..GP | K110M |
| N3 | .T..GP | K110M | .T..GP | K110M | .T..GP | K110M |
| S1–S2 | .T..GP | KC725M | .T..GP | KC725M | ..T | KC725M |
| S3 | .T..GP | KCPM40 | .T..GP | KCPM40 | ..T | KCPM40 |
| S4 | .T..GP | KC725M | ..T | KC725M | ..T | KC725M |
| H1 | .F..GE | KC510M | – | – | – | – |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..GE | 0,13 | 0,42 | 0,70 | 0,09 | 0,30 | 0,50 | 0,07 | 0,23 | 0,38 | 0,06 | 0,20 | 0,33 | 0,06 | 0,18 | 0,30 | .F..GE |
| .T..GP | 0,23 | 0,47 | 0,70 | 0,17 | 0,34 | 0,50 | 0,13 | 0,25 | 0,38 | 0,11 | 0,22 | 0,33 | 0,10 | 0,20 | 0,30 | .T..GP |
| ..T | 0,23 | 0,56 | 0,82 | 0,17 | 0,40 | 0,59 | 0,13 | 0,30 | 0,44 | 0,11 | 0,26 | 0,38 | 0,10 | 0,24 | 0,35 | ..T |
| Material Group | KC110M | KC510M | KC520M | KC725M | KC735M | KCPK30 | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 260 | 230 | 215 | – | – | – | 455 | 395 | 370 |
| 2 | – | – | – | – | – | – | – | – | – | 220 | 190 | 160 | – | – | – | 280 | 255 | 230 | |
| 3 | – | – | – | – | – | – | – | – | – | 200 | 170 | 140 | – | – | – | 255 | 230 | 205 | |
| 4 | – | – | – | – | – | – | – | – | – | 180 | 150 | 120 | – | – | – | 190 | 175 | 160 | |
| 5 | – | – | – | – | – | – | – | – | – | 150 | 135 | 120 | – | – | – | 260 | 230 | 210 | |
| 6 | – | – | – | – | – | – | – | – | – | 130 | 100 | 80 | – | – | – | 160 | 135 | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | 170 | 150 | 135 | 105 | 90 | 80 | 205 | 185 | 155 |
| 2 | – | – | – | – | – | – | – | – | – | 155 | 130 | 110 | 95 | 85 | 75 | 185 | 160 | 140 | |
| 3 | – | – | – | – | – | – | – | – | – | 115 | 100 | 80 | 70 | 60 | – | 145 | 130 | 115 | |
| K | 1 | 130 | 120 | 115 | 295 | 265 | 240 | 270 | 245 | 215 | – | – | – | – | – | – | 295 | 265 | 240 |
| 2 | 115 | 105 | 100 | 230 | 205 | 190 | 210 | 190 | 175 | – | – | – | – | – | – | 235 | 210 | 190 | |
| 3 | 100 | 90 | 80 | 195 | 175 | 160 | 175 | 160 | 145 | – | – | – | – | – | – | 195 | 175 | 160 | |
| N | 1–2 | 505 | 475 | 450 | 640 | 570 | 525 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 410 | 365 | 320 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 35 | 30 | 25 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 35 | 30 | 25 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 45 | 35 | 25 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 45 | 30 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?