ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

ケナメタルにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

品目 がカートに正常に追加されました
カートの表示
Exit Search ソリューションに戻る

ソリューション編集

ソリューション追加

ソリューション名:{{SolutionName}}

    *に類似する製品:

    *へ戻ります | *に類似する製品に変更

    DFSP Whistle Notch WDシャンク • 2 x D

    Drill Fix™ DFSP™本体

    製品番号100030861

    DFSP Whistle Notch WDシャンク • 2 x D
    DFSP Whistle Notch WDシャンク • 2 x D
    DFSP Whistle Notch WDシャンク • 2 x D
    Open expanded view
    DFSP Whistle Notch WDシャンク • 2 x D
    DFSP Whistle Notch WDシャンク • 2 x D
    一般的な表現
    価格オプションについては、当社の営業担当にお問い合わせください。

    特徴と利点

    • DFSPは、経済的な正方形外刃インサートに三角形内刃インサートの優れたセンタリング機能を組み合わせたものです。
    • ドリルにはインサート用ねじとトルクスレンチが付属しています。
    • DFSPのインサートを別途ご注文ください。インサートについては、J97–J98ページをご覧ください。
    • ドリル加工ドリル加工
    • 穴あけ加工：傾斜した入口穴あけ加工：傾斜した入口
    • 穴あけ加工：傾斜した出口穴あけ加工：傾斜した出口
    • 穴あけ加工：Xオフセット穴あけ加工：Xオフセット
    • 穴あけ加工：凸面穴あけ加工：凸面
    • シャンク — ストレートWhistle Notch ドライブおよびフランジ付きシャンク — ストレートWhistle Notch ドライブおよびフランジ付き
    • スルークーラント：径方向：スローアウェイドリルスルークーラント：径方向：スローアウェイドリル
    • 穴あけ加工：止まり穴穴あけ加工：止まり穴
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    警告 • Drill Fix DFR

    警告 貫通穴の加工中、ドリルがワーク材を突き抜ける際にスラグやディスクが発生します。ドリルが静止してワーク材が回転しているときは、このスラグが遠心力によってチャックから飛び散ることがあります。周辺にいる人に向けて飛び散らないように適切なシールドを設けてください。
    DLSCS
    2045—
    3258R 1/4 BSP *
    4068R 1/4 BSP
    5068R 1/4 BSP
    DLS
    2050
    2556
    3260
    4070
    メトリック
    被削材 グループ条件ポケットシートブレーカ 形状材種切削速度 vc径による推奨送り量(fz)
    範囲 m/min
    最小開始値最大ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    メトリック
    切削速度 vcメトリック
    範囲 m/min径による推奨送り量(fz)
    被削材 グループ条件 ポケットシートブレーカ 形状材種最小開始値最大ØSPGX05 DFTX2 14,00-17,49SPGX06 DFT03 17,50-21,99SPGX07 DFT05 22.00-25,99SPGX09 DFT05 26.00-32,99SPGX12 DFT06/..07 33,00-43,99SPGX15 DFT07/..09 44,00-55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3SIMDKC7140260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3UIMDKC7140180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIMDKC7140110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4SIMDKC7140220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4UIMDKC7140150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIMDKC714090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    メトリック
    被削材 グループ条件ポケットシートブレーカ 形状材種切削速度 vc径による推奨送り量(fz)
    範囲 m/min
    最小開始値最大ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IHPKC7140
    IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    メトリック
    切削速度 vc
    範囲 m/min径による推奨送り量(fz)
    被削材 グループ条件ポケットシートブレーカ 形状材種最小開始値最大ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1SIMDKC7140150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2SIMDKC7140150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3SIHPKC7140100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3UIHPKC714080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    メトリック
    被削材 グループ条件ポケットシートブレーカ 形状材種切削速度 vc径による推奨送り量(fz)
    範囲 m/min
    最小開始値最大 Ø
    N1SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    2SOLPKCU40150180210mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    メトリック
    切削速度 vc
    範囲 m/min径による推奨送り量(fz)
    被削材 グループ条件ポケットシートブレーカ 形状材種最小開始値最大ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKCU40200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOFPKCU25120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKC7140120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOFPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOFPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    メトリック
    被削材 グループ条件ポケットシートブレーカ 形状材種切削速度 vc径による推奨送り量(fz)
    範囲 m/min
    最小開始値最大ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOFPKCU25120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOFPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    2SOFPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    3SOHPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    N1SOLPKCU40150190230mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    2SOLPKCU40150180210mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    メトリック
    切削速度 vc
    範囲 m/min径による推奨送り量(fz)
    被削材 グループ条件ポケットシートブレーカ 形状材種最小開始値最大ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    N1SOHPKCPK10350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKMF350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOHPKCU40300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKMF300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKCU40175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKMF175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKCU40150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKMF150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOHPKCU25300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4SIHPKC7140300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4UIHPKC7140250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIHPKC7140200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU40400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5SIHPKMF400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    メトリック
    被削材 グループ条件ポケットシートブレーカ 形状材種切削速度 vc径による推奨送り量(fz)
    範囲 m/min
    最小開始値最大ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOHPKCU40506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    4SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    メトリック
    切削速度 vc
    範囲 m/min径による推奨送り量(fz)
    被削材 グループ条件ポケットシートブレーカ 形状材種最小開始値最大ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1SIMDKC7140607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1UOHPKCU40405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1UIMDKC7140405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2SOHPKCU40506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2SIMDKC7140506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2UOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2UIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    有効な名前を入力してください
    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk