NC Spot Drills
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (19)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
- M Stainless Steel (19)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
- K Cast Iron (19)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
- N Non-Ferrous Materials (19)
- N1Wrought Aluminum (19)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
- N3High-Silicon Aluminum Alloys Si >12.2%(19)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
- S High-Temp Alloys (19)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
Applications
Applications
Convex Drilling (19)
Drilling (7)
Cutting Diameter
Cutting Diameter
- 0.157 in(3)
- 0.237 in(3)
- 0.315 in(3)
- 0.394 in(3)
- 0.473 in(3)
- 0.63 in(2)
- 0.787 in(2)
to
Cutting Diameter
Cutting Diameter
- 4.0 mm(3)
- 6.0 mm(3)
- 8.0 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 16.0 mm(2)
- 20.0 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 6.5 mm(2)
- 9.0 mm(2)
- 11.0 mm(2)
- 12.0 mm(2)
- 14.0 mm(2)
- 16.0 mm(1)
- 18.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.256 in(2)
- 0.354 in(2)
- 0.433 in(2)
- 0.473 in(2)
- 0.551 in(2)
- 0.63 in(1)
- 0.709 in(1)
to
Reach
Reach
- 0.473 in(1)
- 0.551 in(1)
- 0.787 in(2)
- 0.866 in(1)
- 0.946 in(1)
- 1.024 in(1)
to
Reach
Reach
- 12.0 mm(1)
- 14.0 mm(1)
- 20.0 mm(2)
- 22.0 mm(1)
- 24.0 mm(1)
- 26.0 mm(1)
to
Over All Length [L]
Over All Length [L]
- 2.126 in(6)
- 2.283 in(3)
- 2.598 in(3)
- 2.874 in(3)
- 3.228 in(2)
- 3.622 in(2)
to
Over All Length [L]
Over All Length [L]
- 54.0 mm(6)
- 58.0 mm(3)
- 66.0 mm(3)
- 73.0 mm(3)
- 82.0 mm(2)
- 92.0 mm(2)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K10 (12)
- KU15 (7)
frontEnd
Point Angle
Point Angle
- 90.0 (7)
- 120.0 (5)
- 145.0 (7)
to
backEnd
Back-End Diameter
Back-End Diameter
- 6.0 mm(6)
- 8.0 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 16.0 mm(2)
- 20.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.237 in(6)
- 0.315 in(3)
- 0.394 in(3)
- 0.473 in(3)
- 0.63 in(2)
- 0.787 in(2)
to
No filters matching ""
