*に類似する製品:
Mill 1-18™ • Carbide Insert • EDPT-GD • Medium Machining
Shoulder milling insert with two cutting edges per insert
製品番号2271121
ISO カタログ IDEDPT180508PDERGDANSIカタログIDEP1808E
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
製品番号 | 2271121 |
ISO カタログ ID | EDPT180508PDERGD |
ANSIカタログID | EP1808E |
Grade | KC715M |
[LI] Insert Length | 21.76 mm |
[LI] Insert Length | .857 in |
[L10] Insert Cutting Edge Length | 18.61 mm |
[L10] Insert Cutting Edge Length | .733 in |
[S] Insert Thickness | 5.5 mm |
[S] Insert Thickness | .2165 in |
[W] Insert Width | 10.97 mm |
[W] Insert Width | .432 in |
[BS] Corner Facet Length | 2.69 mm |
[BS] Corner Facet Length | .106 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | .0312 in |
Average Chip Thickness [HM] | 0.089 mm |
Average Chip Thickness [HM] | .0035 in |
Cutting Edges per Insert | 2 |
特徴と利点
- Pressed-to-size, for lowest cost per cutting edge.
送りと速度を計算するソリューションを作成する
ソリューションを作成したら、送りと速度アイコンを選択するだけで、システムが推奨事項を提供します。マシンと仕様を追加して情報をカスタマイズしたり、スライダーを使用して調整することもできます。
インサート選択
インサート選択の手引き
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
P3–P4 | .E..GD | KCPK30 | .S..GD | KCPK30 | .E..HD | KCPK30 |
P5–P6 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
M1–M2 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
M3 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
K1–K2 | .E..GD | KCK20B | .E..GD | KCK20B | .S..GD | KCK15 |
K3 | .E..GD | KCK20B | .S..GD | KCK15 | .E..HD | KCPK30 |
N1–N2 | .F..LDJ | KC410M | .E..LDJ | KC422M | .E..LDJ | KC422M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .F..LDJ | KC410M |
S1–S2 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
S3 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
S4 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use