Modular Drilling with Solid Carbide Performance

The KenTIP FS modular drill covers more applications and provides better performance than any other modular system, delivering substantial cost savings and process simplifications on your shop floor.

Carbide where it matters – KenTIP FS inserts cover the entire front part of the drill. The coupling is completely protected from chip flow and contact with the workpiece.

Features & Benefits

  • This modular drilling system covers a 6–26mm diameter range.
  • Up to 12xD drilling depths.
  • Applicable in steels, stainless steels, and cast iron.
  • Large, ultra-high polished chip flutes guarantee hassle-free chip evacuation, enhancing tool life and performance.
  • Taper interface uniquely designed for highest rigidity clamping.
  • Retention lock prevents insert pullout.
  • Large bearing surface positioned for transmission of highest torsional loads without pocket deformation.
  • Large face contact surface.
  • Coolant delivery to the drill point and to the rake for guaranteed coolant delivery where it is needed.

KenTIP FS Modular Drill Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (927)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(927)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(927)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(927)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(927)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(927)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(926)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(926)
    • M Stainless Steel (783)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(783)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(783)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(721)
    • K Cast Iron (1055)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1055)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1055)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1055)
    • N Non-Ferrous Materials (239)
      • N1
        Wrought Aluminum (239)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(239)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(239)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (239)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (69)
      • N6
        Carbon, Graphite Composites, CFRP (69)
      • N7
        MMC's (68)
    • S High-Temp Alloys (610)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(594)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(594)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(594)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(610)
    • H Hardened Materials (68)
      • H1
        Hardened Materials 44-48 HRC(68)
      • H2
        Hardened Materials 48-55 HRC(68)
      • H3
        Hardened Materials 56-60 HRC(68)
      • H4
        Hardened Materials >60 HRC(68)
    • C CFRP Materials (181)
      • C1
        CFRP, CFRP / CFRP (72)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (176)
      • C3
        CFRP / Titanium CFRP / High Temp (176)
      • C4
        CFRP / Stainless Steel (176)
    Select First Choice
    • BR (27)
    • CN (185)
    • DE (263)
    • GB (151)
    • IN (29)
    • SG (94)
    • US (307)
    Applications
    Applications
    • CounterboringCounterboring (40)
    • CountersinkingCountersinking (40)
    • DrillingDrilling (354)
    • Stacked Plates DrillingStacked Plates Drilling (297)
    Cutting Diameter
    Cutting Diameter
    • 0.237 in(13)
    • 0.24 in(9)
    • 0.244 in(10)
    • 0.248 in(9)
    • 0.25 in(15)
    • 0.252 in(9)
    • 0.256 in(13)
    • 0.257 in(10)
    • 0.26 in(9)
    • 0.261 in(10)
    • 0.264 in(9)
    • 0.266 in(11)
    • 0.268 in(14)
    • 0.272 in(10)
    • 0.276 in(13)
    • 0.28 in(9)
    • 0.281 in(10)
    • 0.284 in(9)
    • 0.288 in(9)
    • 0.29 in(9)
    • 0.291 in(9)
    • 0.295 in(13)
    • 0.297 in(9)
    • 0.299 in(10)
    • 0.303 in(9)
    • 0.307 in(10)
    • 0.311 in(9)
    • 0.313 in(17)
    • 0.315 in(23)
    • 0.319 in(21)
    • 0.322 in(18)
    • 0.323 in(21)
    • 0.327 in(19)
    • 0.328 in(20)
    • 0.331 in(19)
    • 0.332 in(18)
    • 0.335 in(23)
    • 0.336 in(18)
    • 0.339 in(22)
    • 0.343 in(21)
    • 0.345 in(20)
    • 0.347 in(20)
    • 0.349 in(18)
    • 0.351 in(20)
    • 0.354 in(23)
    • 0.358 in(21)
    • 0.359 in(18)
    • 0.362 in(19)
    • 0.366 in(19)
    • 0.368 in(19)
    • 0.37 in(20)
    • 0.374 in(22)
    • 0.375 in(25)
    • 0.376 in(20)
    • 0.378 in(21)
    • 0.382 in(21)
    • 0.386 in(21)
    • 0.39 in(20)
    • 0.391 in(20)
    • 0.394 in(24)
    • 0.395 in(19)
    • 0.397 in(19)
    • 0.398 in(21)
    • 0.402 in(23)
    • 0.404 in(19)
    • 0.406 in(22)
    • 0.408 in(22)
    • 0.41 in(21)
    • 0.414 in(41)
    • 0.417 in(21)
    • 0.421 in(21)
    • 0.422 in(20)
    • 0.425 in(22)
    • 0.429 in(20)
    • 0.433 in(22)
    • 0.437 in(23)
    • 0.438 in(24)
    • 0.441 in(20)
    • 0.445 in(19)
    • 0.449 in(19)
    • 0.453 in(25)
    • 0.457 in(20)
    • 0.461 in(19)
    • 0.465 in(22)
    • 0.47 in(23)
    • 0.473 in(23)
    • 0.477 in(20)
    • 0.48 in(21)
    • 0.484 in(23)
    • 0.488 in(20)
    • 0.491 in(20)
    • 0.492 in(22)
    • 0.496 in(19)
    • 0.5 in(26)
    • 0.504 in(20)
    • 0.508 in(20)
    • 0.512 in(22)
    • 0.516 in(21)
    • 0.52 in(21)
    • 0.523 in(18)
    • 0.524 in(20)
    • 0.527 in(18)
    • 0.528 in(19)
    • 0.531 in(43)
    • 0.535 in(20)
    • 0.539 in(19)
    • 0.543 in(21)
    • 0.547 in(23)
    • 0.549 in(19)
    • 0.551 in(23)
    • 0.555 in(22)
    • 0.559 in(21)
    • 0.564 in(26)
    • 0.568 in(21)
    • 0.572 in(22)
    • 0.576 in(20)
    • 0.578 in(22)
    • 0.579 in(18)
    • 0.583 in(21)
    • 0.587 in(18)
    • 0.591 in(23)
    • 0.594 in(21)
    • 0.595 in(22)
    • 0.598 in(22)
    • 0.602 in(22)
    • 0.605 in(19)
    • 0.606 in(19)
    • 0.609 in(20)
    • 0.61 in(23)
    • 0.614 in(21)
    • 0.618 in(20)
    • 0.622 in(21)
    • 0.625 in(23)
    • 0.626 in(19)
    • 0.63 in(22)
    • 0.631 in(18)
    • 0.633 in(18)
    • 0.634 in(24)
    • 0.636 in(18)
    • 0.638 in(20)
    • 0.641 in(20)
    • 0.642 in(20)
    • 0.646 in(19)
    • 0.65 in(22)
    • 0.652 in(18)
    • 0.654 in(20)
    • 0.656 in(22)
    • 0.657 in(19)
    • 0.661 in(19)
    • 0.665 in(19)
    • 0.669 in(22)
    • 0.672 in(20)
    • 0.673 in(20)
    • 0.677 in(20)
    • 0.681 in(20)
    • 0.685 in(19)
    • 0.687 in(21)
    • 0.689 in(20)
    • 0.69 in(22)
    • 0.692 in(17)
    • 0.694 in(20)
    • 0.698 in(22)
    • 0.702 in(20)
    • 0.704 in(19)
    • 0.705 in(19)
    • 0.709 in(22)
    • 0.713 in(20)
    • 0.717 in(18)
    • 0.719 in(21)
    • 0.72 in(19)
    • 0.724 in(19)
    • 0.728 in(22)
    • 0.732 in(20)
    • 0.734 in(19)
    • 0.736 in(20)
    • 0.74 in(19)
    • 0.744 in(19)
    • 0.748 in(20)
    • 0.75 in(20)
    • 0.752 in(17)
    • 0.756 in(19)
    • 0.757 in(17)
    • 0.758 in(18)
    • 0.759 in(19)
    • 0.76 in(17)
    • 0.762 in(18)
    • 0.764 in(16)
    • 0.766 in(19)
    • 0.768 in(20)
    • 0.772 in(16)
    • 0.776 in(17)
    • 0.78 in(18)
    • 0.781 in(19)
    • 0.784 in(17)
    • 0.787 in(14)
    • 0.791 in(11)
    • 0.795 in(11)
    • 0.797 in(11)
    • 0.799 in(11)
    • 0.807 in(14)
    • 0.811 in(11)
    • 0.814 in(14)
    • 0.816 in(10)
    • 0.82 in(10)
    • 0.824 in(10)
    • 0.828 in(24)
    • 0.832 in(11)
    • 0.833 in(10)
    • 0.835 in(11)
    • 0.839 in(10)
    • 0.843 in(10)
    • 0.844 in(11)
    • 0.846 in(14)
    • 0.854 in(10)
    • 0.858 in(11)
    • 0.859 in(10)
    • 0.862 in(10)
    • 0.866 in(14)
    • 0.87 in(10)
    • 0.874 in(11)
    • 0.875 in(14)
    • 0.882 in(10)
    • 0.884 in(10)
    • 0.886 in(14)
    • 0.89 in(10)
    • 0.894 in(10)
    • 0.898 in(11)
    • 0.902 in(10)
    • 0.906 in(14)
    • 0.909 in(10)
    • 0.913 in(11)
    • 0.917 in(10)
    • 0.921 in(10)
    • 0.922 in(11)
    • 0.925 in(14)
    • 0.929 in(10)
    • 0.933 in(10)
    • 0.937 in(14)
    • 0.942 in(10)
    • 0.946 in(14)
    • 0.95 in(10)
    • 0.954 in(10)
    • 0.958 in(10)
    • 0.961 in(10)
    • 0.965 in(14)
    • 0.969 in(12)
    • 0.972 in(11)
    • 0.976 in(10)
    • 0.98 in(10)
    • 0.984 in(14)
    • 0.987 in(10)
    • 0.988 in(10)
    • 0.992 in(10)
    • 0.994 in(10)
    • 0.996 in(10)
    • 1.0 in(14)
    • 1.004 in(13)
    • 1.006 in(10)
    • 1.008 in(11)
    • 1.01 in(10)
    • 1.012 in(14)
    • 1.016 in(12)
    • 1.02 in(10)
    • 1.024 in(14)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.0 mm(13)
    • 6.101 mm(9)
    • 6.2 mm(10)
    • 6.301 mm(9)
    • 6.351 mm(15)
    • 6.4 mm(9)
    • 6.5 mm(13)
    • 6.525 mm(10)
    • 6.601 mm(9)
    • 6.625 mm(10)
    • 6.7 mm(9)
    • 6.75 mm(11)
    • 6.801 mm(14)
    • 6.9 mm(10)
    • 7.0 mm(13)
    • 7.101 mm(9)
    • 7.15 mm(10)
    • 7.2 mm(9)
    • 7.301 mm(9)
    • 7.375 mm(9)
    • 7.4 mm(9)
    • 7.5 mm(13)
    • 7.551 mm(9)
    • 7.601 mm(10)
    • 7.7 mm(9)
    • 7.801 mm(10)
    • 7.9 mm(9)
    • 7.95 mm(17)
    • 8.0 mm(23)
    • 8.1 mm(21)
    • 8.175 mm(18)
    • 8.201 mm(21)
    • 8.3 mm(19)
    • 8.326 mm(20)
    • 8.4 mm(19)
    • 8.425 mm(18)
    • 8.5 mm(23)
    • 8.525 mm(18)
    • 8.6 mm(22)
    • 8.701 mm(21)
    • 8.725 mm(20)
    • 8.8 mm(20)
    • 8.85 mm(18)
    • 8.9 mm(20)
    • 9.0 mm(23)
    • 9.1 mm(21)
    • 9.125 mm(18)
    • 9.201 mm(19)
    • 9.3 mm(19)
    • 9.35 mm(19)
    • 9.4 mm(20)
    • 9.5 mm(22)
    • 9.525 mm(25)
    • 9.55 mm(20)
    • 9.601 mm(21)
    • 9.701 mm(21)
    • 9.8 mm(21)
    • 9.9 mm(20)
    • 9.925 mm(20)
    • 10.0 mm(24)
    • 10.025 mm(19)
    • 10.076 mm(19)
    • 10.101 mm(21)
    • 10.201 mm(23)
    • 10.25 mm(19)
    • 10.3 mm(22)
    • 10.326 mm(22)
    • 10.4 mm(21)
    • 10.5 mm(41)
    • 10.601 mm(21)
    • 10.701 mm(21)
    • 10.726 mm(20)
    • 10.8 mm(22)
    • 10.9 mm(20)
    • 11.0 mm(22)
    • 11.101 mm(23)
    • 11.125 mm(24)
    • 11.201 mm(20)
    • 11.3 mm(19)
    • 11.4 mm(19)
    • 11.5 mm(25)
    • 11.601 mm(20)
    • 11.701 mm(19)
    • 11.8 mm(22)
    • 11.9 mm(23)
    • 12.0 mm(23)
    • 12.101 mm(20)
    • 12.201 mm(21)
    • 12.3 mm(23)
    • 12.4 mm(20)
    • 12.476 mm(20)
    • 12.5 mm(22)
    • 12.601 mm(19)
    • 12.701 mm(26)
    • 12.8 mm(20)
    • 12.9 mm(20)
    • 13.0 mm(22)
    • 13.101 mm(21)
    • 13.201 mm(21)
    • 13.275 mm(18)
    • 13.3 mm(20)
    • 13.375 mm(18)
    • 13.4 mm(19)
    • 13.5 mm(43)
    • 13.601 mm(20)
    • 13.701 mm(19)
    • 13.8 mm(21)
    • 13.9 mm(23)
    • 13.951 mm(19)
    • 14.0 mm(23)
    • 14.101 mm(22)
    • 14.201 mm(21)
    • 14.3 mm(26)
    • 14.4 mm(21)
    • 14.5 mm(22)
    • 14.601 mm(20)
    • 14.675 mm(22)
    • 14.701 mm(18)
    • 14.8 mm(21)
    • 14.9 mm(18)
    • 15.0 mm(23)
    • 15.076 mm(21)
    • 15.101 mm(22)
    • 15.201 mm(22)
    • 15.3 mm(22)
    • 15.375 mm(19)
    • 15.4 mm(19)
    • 15.476 mm(20)
    • 15.5 mm(23)
    • 15.601 mm(21)
    • 15.701 mm(20)
    • 15.8 mm(21)
    • 15.875 mm(23)
    • 15.9 mm(19)
    • 16.0 mm(22)
    • 16.026 mm(18)
    • 16.075 mm(18)
    • 16.1 mm(24)
    • 16.151 mm(18)
    • 16.2 mm(20)
    • 16.276 mm(20)
    • 16.3 mm(20)
    • 16.401 mm(19)
    • 16.5 mm(22)
    • 16.55 mm(18)
    • 16.6 mm(20)
    • 16.675 mm(22)
    • 16.7 mm(19)
    • 16.8 mm(19)
    • 16.901 mm(19)
    • 17.0 mm(22)
    • 17.075 mm(20)
    • 17.1 mm(20)
    • 17.2 mm(20)
    • 17.3 mm(20)
    • 17.401 mm(19)
    • 17.45 mm(21)
    • 17.475 mm(20)
    • 17.5 mm(22)
    • 17.55 mm(17)
    • 17.6 mm(20)
    • 17.7 mm(22)
    • 17.8 mm(20)
    • 17.85 mm(19)
    • 17.901 mm(19)
    • 18.0 mm(22)
    • 18.1 mm(20)
    • 18.2 mm(18)
    • 18.25 mm(21)
    • 18.3 mm(19)
    • 18.401 mm(19)
    • 18.5 mm(22)
    • 18.6 mm(20)
    • 18.651 mm(19)
    • 18.7 mm(20)
    • 18.8 mm(19)
    • 18.901 mm(19)
    • 19.0 mm(20)
    • 19.05 mm(20)
    • 19.1 mm(17)
    • 19.201 mm(19)
    • 19.225 mm(17)
    • 19.25 mm(18)
    • 19.276 mm(19)
    • 19.3 mm(17)
    • 19.35 mm(18)
    • 19.401 mm(16)
    • 19.451 mm(19)
    • 19.5 mm(20)
    • 19.6 mm(16)
    • 19.701 mm(17)
    • 19.8 mm(18)
    • 19.85 mm(19)
    • 19.901 mm(17)
    • 20.0 mm(14)
    • 20.1 mm(11)
    • 20.201 mm(11)
    • 20.25 mm(11)
    • 20.3 mm(11)
    • 20.5 mm(14)
    • 20.6 mm(11)
    • 20.651 mm(14)
    • 20.701 mm(10)
    • 20.8 mm(10)
    • 20.901 mm(10)
    • 21.0 mm(24)
    • 21.1 mm(11)
    • 21.151 mm(10)
    • 21.201 mm(11)
    • 21.3 mm(10)
    • 21.401 mm(10)
    • 21.425 mm(11)
    • 21.5 mm(14)
    • 21.701 mm(10)
    • 21.8 mm(11)
    • 21.826 mm(10)
    • 21.901 mm(10)
    • 22.0 mm(14)
    • 22.1 mm(10)
    • 22.201 mm(11)
    • 22.225 mm(14)
    • 22.401 mm(10)
    • 22.451 mm(10)
    • 22.5 mm(14)
    • 22.6 mm(10)
    • 22.701 mm(10)
    • 22.8 mm(11)
    • 22.901 mm(10)
    • 23.0 mm(14)
    • 23.1 mm(10)
    • 23.201 mm(11)
    • 23.3 mm(10)
    • 23.401 mm(10)
    • 23.425 mm(11)
    • 23.5 mm(14)
    • 23.6 mm(10)
    • 23.701 mm(10)
    • 23.8 mm(14)
    • 23.901 mm(10)
    • 24.0 mm(14)
    • 24.1 mm(10)
    • 24.201 mm(10)
    • 24.3 mm(10)
    • 24.401 mm(10)
    • 24.5 mm(14)
    • 24.6 mm(12)
    • 24.701 mm(11)
    • 24.8 mm(10)
    • 24.901 mm(10)
    • 25.0 mm(14)
    • 25.076 mm(10)
    • 25.1 mm(10)
    • 25.201 mm(10)
    • 25.25 mm(10)
    • 25.3 mm(10)
    • 25.401 mm(14)
    • 25.5 mm(13)
    • 25.55 mm(10)
    • 25.6 mm(11)
    • 25.651 mm(10)
    • 25.675 mm(13)
    • 25.701 mm(10)
    • 25.8 mm(12)
    • 25.901 mm(10)
    • 26.0 mm(14)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 9.0 mm(1)
    • 10.0 mm(1)
    • 11.0 mm(2)
    • 12.0 mm(1)
    • 13.0 mm(1)
    • 14.0 mm(2)
    • 15.0 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(2)
    • 18.0 mm(1)
    • 19.0 mm(3)
    • 20.0 mm(4)
    • 21.0 mm(3)
    • 22.0 mm(1)
    • 23.0 mm(3)
    • 24.0 mm(3)
    • 25.5 mm(1)
    • 26.0 mm(5)
    • 27.0 mm(6)
    • 28.5 mm(1)
    • 29.0 mm(5)
    • 30.0 mm(6)
    • 31.5 mm(2)
    • 32.0 mm(7)
    • 33.0 mm(8)
    • 34.5 mm(1)
    • 35.0 mm(7)
    • 36.0 mm(6)
    • 37.5 mm(2)
    • 38.0 mm(8)
    • 39.0 mm(6)
    • 40.0 mm(3)
    • 40.5 mm(1)
    • 41.0 mm(4)
    • 42.0 mm(6)
    • 43.0 mm(5)
    • 43.5 mm(3)
    • 44.0 mm(4)
    • 45.0 mm(10)
    • 45.5 mm(1)
    • 47.5 mm(1)
    • 48.0 mm(11)
    • 49.0 mm(1)
    • 50.0 mm(7)
    • 51.0 mm(6)
    • 53.0 mm(8)
    • 54.0 mm(5)
    • 54.5 mm(1)
    • 55.0 mm(5)
    • 56.0 mm(2)
    • 56.5 mm(1)
    • 57.0 mm(5)
    • 58.0 mm(6)
    • 60.0 mm(12)
    • 62.0 mm(1)
    • 63.0 mm(7)
    • 64.0 mm(2)
    • 65.0 mm(5)
    • 65.5 mm(1)
    • 66.0 mm(2)
    • 68.0 mm(9)
    • 69.0 mm(3)
    • 70.0 mm(5)
    • 72.0 mm(6)
    • 72.5 mm(1)
    • 73.0 mm(5)
    • 75.0 mm(7)
    • 76.0 mm(6)
    • 78.0 mm(2)
    • 79.0 mm(1)
    • 80.0 mm(9)
    • 84.0 mm(5)
    • 85.0 mm(5)
    • 88.0 mm(4)
    • 90.0 mm(6)
    • 92.0 mm(4)
    • 95.0 mm(5)
    • 96.0 mm(5)
    • 100.0 mm(9)
    • 102.0 mm(1)
    • 104.0 mm(4)
    • 105.0 mm(3)
    • 108.0 mm(5)
    • 110.0 mm(3)
    • 112.0 mm(4)
    • 114.0 mm(1)
    • 115.0 mm(3)
    • 116.0 mm(4)
    • 120.0 mm(8)
    • 125.0 mm(3)
    • 126.0 mm(1)
    • 128.0 mm(4)
    • 130.0 mm(3)
    • 132.0 mm(1)
    • 136.0 mm(4)
    • 138.0 mm(1)
    • 144.0 mm(5)
    • 150.0 mm(1)
    • 152.0 mm(4)
    • 156.0 mm(1)
    • 160.0 mm(4)
    • 162.0 mm(1)
    • 168.0 mm(3)
    • 174.0 mm(1)
    • 176.0 mm(2)
    • 180.0 mm(1)
    • 184.0 mm(2)
    • 192.0 mm(3)
    • 200.0 mm(2)
    • 204.0 mm(1)
    • 208.0 mm(2)
    • 216.0 mm(1)
    • 228.0 mm(1)
    • 240.0 mm(1)
    • 252.0 mm(1)
    • 264.0 mm(1)
    • 276.0 mm(1)
    • 288.0 mm(1)
    • 300.0 mm(1)
    • 312.0 mm(1)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.354 in(1)
    • 0.394 in(1)
    • 0.433 in(2)
    • 0.473 in(1)
    • 0.512 in(1)
    • 0.551 in(2)
    • 0.591 in(1)
    • 0.63 in(1)
    • 0.669 in(2)
    • 0.709 in(1)
    • 0.748 in(3)
    • 0.787 in(4)
    • 0.828 in(3)
    • 0.866 in(1)
    • 0.906 in(3)
    • 0.946 in(3)
    • 1.004 in(1)
    • 1.024 in(5)
    • 1.063 in(6)
    • 1.122 in(1)
    • 1.143 in(5)
    • 1.181 in(6)
    • 1.24 in(2)
    • 1.26 in(7)
    • 1.299 in(8)
    • 1.358 in(1)
    • 1.379 in(7)
    • 1.417 in(6)
    • 1.476 in(2)
    • 1.496 in(8)
    • 1.536 in(6)
    • 1.575 in(3)
    • 1.594 in(1)
    • 1.614 in(4)
    • 1.655 in(6)
    • 1.693 in(5)
    • 1.713 in(3)
    • 1.732 in(4)
    • 1.772 in(10)
    • 1.792 in(1)
    • 1.87 in(1)
    • 1.891 in(11)
    • 1.929 in(1)
    • 1.969 in(7)
    • 2.008 in(6)
    • 2.087 in(8)
    • 2.126 in(5)
    • 2.146 in(1)
    • 2.165 in(5)
    • 2.205 in(2)
    • 2.224 in(1)
    • 2.244 in(5)
    • 2.283 in(6)
    • 2.362 in(12)
    • 2.441 in(1)
    • 2.48 in(7)
    • 2.52 in(2)
    • 2.559 in(5)
    • 2.579 in(1)
    • 2.598 in(2)
    • 2.677 in(9)
    • 2.717 in(3)
    • 2.757 in(5)
    • 2.835 in(6)
    • 2.854 in(1)
    • 2.874 in(5)
    • 2.953 in(7)
    • 2.992 in(6)
    • 3.071 in(2)
    • 3.11 in(1)
    • 3.15 in(9)
    • 3.307 in(5)
    • 3.346 in(5)
    • 3.465 in(4)
    • 3.543 in(6)
    • 3.622 in(4)
    • 3.74 in(5)
    • 3.781 in(5)
    • 3.938 in(9)
    • 4.016 in(1)
    • 4.094 in(4)
    • 4.134 in(3)
    • 4.252 in(5)
    • 4.331 in(3)
    • 4.409 in(4)
    • 4.488 in(1)
    • 4.529 in(3)
    • 4.567 in(4)
    • 4.724 in(8)
    • 4.921 in(3)
    • 4.961 in(1)
    • 5.039 in(4)
    • 5.118 in(3)
    • 5.197 in(1)
    • 5.354 in(4)
    • 5.433 in(1)
    • 5.67 in(5)
    • 5.906 in(1)
    • 5.984 in(4)
    • 6.142 in(1)
    • 6.299 in(4)
    • 6.378 in(1)
    • 6.614 in(3)
    • 6.851 in(1)
    • 6.929 in(2)
    • 7.087 in(1)
    • 7.244 in(2)
    • 7.559 in(3)
    • 7.875 in(2)
    • 8.031 in(1)
    • 8.189 in(2)
    • 8.504 in(1)
    • 8.976 in(1)
    • 9.449 in(1)
    • 9.921 in(1)
    • 10.394 in(1)
    • 10.866 in(1)
    • 11.339 in(1)
    • 11.811 in(1)
    • 12.283 in(1)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.673 in(1)
    • 0.717 in(1)
    • 0.752 in(1)
    • 0.772 in(1)
    • 0.832 in(1)
    • 0.894 in(1)
    • 0.954 in(1)
    • 0.972 in(1)
    • 1.032 in(1)
    • 1.039 in(1)
    • 1.067 in(1)
    • 1.091 in(1)
    • 1.094 in(1)
    • 1.11 in(1)
    • 1.147 in(3)
    • 1.161 in(1)
    • 1.165 in(1)
    • 1.201 in(1)
    • 1.22 in(1)
    • 1.244 in(2)
    • 1.28 in(1)
    • 1.283 in(1)
    • 1.295 in(1)
    • 1.303 in(2)
    • 1.327 in(1)
    • 1.335 in(1)
    • 1.339 in(1)
    • 1.343 in(1)
    • 1.354 in(1)
    • 1.395 in(1)
    • 1.407 in(2)
    • 1.409 in(1)
    • 1.425 in(1)
    • 1.465 in(3)
    • 1.488 in(2)
    • 1.532 in(1)
    • 1.543 in(1)
    • 1.551 in(2)
    • 1.563 in(2)
    • 1.579 in(2)
    • 1.598 in(1)
    • 1.606 in(1)
    • 1.622 in(4)
    • 1.643 in(1)
    • 1.685 in(1)
    • 1.693 in(1)
    • 1.697 in(3)
    • 1.705 in(1)
    • 1.72 in(2)
    • 1.724 in(1)
    • 1.776 in(2)
    • 1.78 in(1)
    • 1.792 in(1)
    • 1.795 in(1)
    • 1.807 in(1)
    • 1.823 in(1)
    • 1.831 in(1)
    • 1.835 in(2)
    • 1.843 in(1)
    • 1.846 in(1)
    • 1.854 in(1)
    • 1.874 in(2)
    • 1.879 in(1)
    • 1.903 in(1)
    • 1.909 in(1)
    • 1.929 in(2)
    • 1.933 in(2)
    • 1.945 in(1)
    • 1.949 in(2)
    • 1.965 in(3)
    • 2.0 in(1)
    • 2.012 in(1)
    • 2.016 in(1)
    • 2.028 in(2)
    • 2.031 in(1)
    • 2.043 in(1)
    • 2.075 in(2)
    • 2.083 in(2)
    • 2.094 in(1)
    • 2.098 in(1)
    • 2.102 in(1)
    • 2.114 in(2)
    • 2.118 in(1)
    • 2.122 in(1)
    • 2.126 in(1)
    • 2.15 in(1)
    • 2.173 in(2)
    • 2.181 in(2)
    • 2.185 in(1)
    • 2.205 in(1)
    • 2.217 in(3)
    • 2.236 in(3)
    • 2.244 in(1)
    • 2.261 in(1)
    • 2.287 in(1)
    • 2.295 in(2)
    • 2.303 in(1)
    • 2.307 in(2)
    • 2.311 in(2)
    • 2.323 in(1)
    • 2.331 in(3)
    • 2.354 in(1)
    • 2.378 in(1)
    • 2.39 in(1)
    • 2.394 in(1)
    • 2.398 in(1)
    • 2.41 in(5)
    • 2.422 in(1)
    • 2.461 in(1)
    • 2.465 in(1)
    • 2.469 in(1)
    • 2.516 in(1)
    • 2.524 in(4)
    • 2.535 in(1)
    • 2.543 in(1)
    • 2.547 in(2)
    • 2.563 in(1)
    • 2.606 in(1)
    • 2.614 in(1)
    • 2.622 in(1)
    • 2.626 in(2)
    • 2.642 in(2)
    • 2.677 in(2)
    • 2.697 in(1)
    • 2.701 in(3)
    • 2.709 in(1)
    • 2.717 in(1)
    • 2.748 in(1)
    • 2.781 in(2)
    • 2.791 in(1)
    • 2.807 in(1)
    • 2.815 in(1)
    • 2.827 in(1)
    • 2.854 in(1)
    • 2.858 in(1)
    • 2.874 in(4)
    • 2.878 in(2)
    • 2.886 in(1)
    • 2.906 in(1)
    • 2.93 in(1)
    • 2.949 in(1)
    • 2.972 in(1)
    • 2.98 in(1)
    • 2.988 in(1)
    • 2.996 in(1)
    • 3.0 in(2)
    • 3.004 in(1)
    • 3.012 in(2)
    • 3.024 in(1)
    • 3.035 in(2)
    • 3.059 in(2)
    • 3.095 in(1)
    • 3.106 in(2)
    • 3.126 in(1)
    • 3.13 in(1)
    • 3.134 in(1)
    • 3.142 in(2)
    • 3.161 in(1)
    • 3.165 in(1)
    • 3.173 in(1)
    • 3.193 in(1)
    • 3.197 in(1)
    • 3.224 in(1)
    • 3.236 in(2)
    • 3.244 in(2)
    • 3.253 in(1)
    • 3.277 in(1)
    • 3.287 in(2)
    • 3.295 in(1)
    • 3.315 in(1)
    • 3.339 in(3)
    • 3.343 in(1)
    • 3.358 in(1)
    • 3.378 in(1)
    • 3.386 in(1)
    • 3.414 in(2)
    • 3.434 in(3)
    • 3.472 in(1)
    • 3.484 in(1)
    • 3.496 in(1)
    • 3.504 in(1)
    • 3.512 in(1)
    • 3.563 in(2)
    • 3.567 in(1)
    • 3.571 in(1)
    • 3.575 in(2)
    • 3.579 in(1)
    • 3.591 in(2)
    • 3.634 in(1)
    • 3.669 in(1)
    • 3.689 in(1)
    • 3.72 in(2)
    • 3.744 in(1)
    • 3.769 in(2)
    • 3.785 in(2)
    • 3.799 in(1)
    • 3.803 in(1)
    • 3.819 in(1)
    • 3.827 in(1)
    • 3.862 in(1)
    • 3.93 in(1)
    • 3.942 in(2)
    • 3.992 in(1)
    • 3.996 in(1)
    • 4.016 in(2)
    • 4.024 in(1)
    • 4.039 in(1)
    • 4.075 in(1)
    • 4.106 in(1)
    • 4.118 in(2)
    • 4.158 in(1)
    • 4.21 in(1)
    • 4.213 in(1)
    • 4.276 in(1)
    • 4.291 in(2)
    • 4.303 in(1)
    • 4.323 in(1)
    • 4.335 in(1)
    • 4.386 in(1)
    • 4.429 in(1)
    • 4.469 in(2)
    • 4.476 in(1)
    • 4.48 in(1)
    • 4.5 in(1)
    • 4.559 in(1)
    • 4.583 in(1)
    • 4.642 in(3)
    • 4.654 in(2)
    • 4.702 in(1)
    • 4.705 in(1)
    • 4.736 in(1)
    • 4.807 in(1)
    • 4.819 in(2)
    • 4.835 in(1)
    • 4.874 in(2)
    • 4.906 in(1)
    • 4.992 in(2)
    • 5.079 in(1)
    • 5.087 in(1)
    • 5.098 in(2)
    • 5.114 in(1)
    • 5.165 in(1)
    • 5.189 in(1)
    • 5.256 in(1)
    • 5.323 in(2)
    • 5.343 in(2)
    • 5.351 in(1)
    • 5.441 in(1)
    • 5.457 in(1)
    • 5.543 in(2)
    • 5.594 in(1)
    • 5.673 in(2)
    • 5.76 in(1)
    • 5.768 in(2)
    • 5.807 in(1)
    • 5.851 in(1)
    • 6.024 in(2)
    • 6.047 in(1)
    • 6.098 in(1)
    • 6.15 in(1)
    • 6.354 in(1)
    • 6.359 in(1)
    • 6.402 in(1)
    • 6.429 in(1)
    • 6.457 in(1)
    • 6.606 in(1)
    • 6.721 in(1)
    • 6.744 in(1)
    • 6.791 in(1)
    • 6.862 in(1)
    • 7.063 in(1)
    • 7.067 in(1)
    • 7.11 in(1)
    • 7.134 in(2)
    • 7.362 in(1)
    • 7.472 in(2)
    • 7.618 in(1)
    • 7.815 in(2)
    • 8.095 in(1)
    • 8.158 in(2)
    • 8.496 in(2)
    • 8.602 in(1)
    • 8.839 in(2)
    • 9.102 in(1)
    • 9.567 in(1)
    • 10.06 in(1)
    • 10.441 in(1)
    • 10.937 in(1)
    • 11.437 in(1)
    • 11.933 in(1)
    • 12.433 in(1)
    • 12.933 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 17.1 mm(1)
    • 18.2 mm(1)
    • 19.1 mm(1)
    • 19.6 mm(1)
    • 21.1 mm(1)
    • 22.701 mm(1)
    • 24.201 mm(1)
    • 24.701 mm(1)
    • 26.201 mm(1)
    • 26.401 mm(1)
    • 27.1 mm(1)
    • 27.701 mm(1)
    • 27.8 mm(1)
    • 28.201 mm(1)
    • 29.1 mm(3)
    • 29.5 mm(1)
    • 29.6 mm(1)
    • 30.5 mm(1)
    • 31.0 mm(1)
    • 31.6 mm(2)
    • 32.5 mm(1)
    • 32.6 mm(1)
    • 32.9 mm(1)
    • 33.1 mm(2)
    • 33.7 mm(1)
    • 33.9 mm(1)
    • 34.0 mm(1)
    • 34.1 mm(1)
    • 34.4 mm(1)
    • 35.4 mm(1)
    • 35.7 mm(2)
    • 35.801 mm(1)
    • 36.2 mm(1)
    • 37.2 mm(3)
    • 37.801 mm(2)
    • 38.901 mm(1)
    • 39.2 mm(1)
    • 39.401 mm(2)
    • 39.7 mm(2)
    • 40.1 mm(2)
    • 40.6 mm(1)
    • 40.801 mm(1)
    • 41.2 mm(4)
    • 41.7 mm(1)
    • 42.801 mm(1)
    • 43.0 mm(1)
    • 43.1 mm(3)
    • 43.301 mm(1)
    • 43.7 mm(2)
    • 43.801 mm(1)
    • 45.1 mm(2)
    • 45.2 mm(1)
    • 45.5 mm(1)
    • 45.6 mm(1)
    • 45.901 mm(1)
    • 46.301 mm(1)
    • 46.5 mm(1)
    • 46.6 mm(2)
    • 46.801 mm(1)
    • 46.901 mm(1)
    • 47.1 mm(1)
    • 47.6 mm(2)
    • 47.7 mm(1)
    • 48.301 mm(1)
    • 48.5 mm(1)
    • 49.0 mm(2)
    • 49.1 mm(2)
    • 49.401 mm(1)
    • 49.5 mm(2)
    • 49.901 mm(3)
    • 50.801 mm(1)
    • 51.1 mm(1)
    • 51.2 mm(1)
    • 51.5 mm(2)
    • 51.6 mm(1)
    • 51.901 mm(1)
    • 52.7 mm(2)
    • 52.901 mm(2)
    • 53.2 mm(1)
    • 53.301 mm(1)
    • 53.401 mm(1)
    • 53.7 mm(2)
    • 53.801 mm(1)
    • 53.901 mm(1)
    • 54.0 mm(1)
    • 54.6 mm(1)
    • 55.2 mm(2)
    • 55.401 mm(2)
    • 55.5 mm(1)
    • 56.0 mm(1)
    • 56.301 mm(3)
    • 56.801 mm(3)
    • 57.0 mm(1)
    • 57.401 mm(1)
    • 58.1 mm(1)
    • 58.301 mm(2)
    • 58.5 mm(1)
    • 58.6 mm(2)
    • 58.7 mm(2)
    • 59.0 mm(1)
    • 59.2 mm(3)
    • 59.801 mm(1)
    • 60.401 mm(1)
    • 60.7 mm(1)
    • 60.801 mm(1)
    • 60.901 mm(1)
    • 61.2 mm(5)
    • 61.5 mm(1)
    • 62.5 mm(1)
    • 62.6 mm(1)
    • 62.7 mm(1)
    • 63.901 mm(1)
    • 64.101 mm(4)
    • 64.4 mm(1)
    • 64.601 mm(1)
    • 64.7 mm(2)
    • 65.101 mm(1)
    • 66.2 mm(1)
    • 66.4 mm(1)
    • 66.601 mm(1)
    • 66.7 mm(2)
    • 67.101 mm(2)
    • 68.0 mm(2)
    • 68.5 mm(1)
    • 68.601 mm(3)
    • 68.8 mm(1)
    • 69.0 mm(1)
    • 69.8 mm(1)
    • 70.601 mm(2)
    • 70.9 mm(1)
    • 71.3 mm(1)
    • 71.5 mm(1)
    • 71.8 mm(1)
    • 72.5 mm(1)
    • 72.601 mm(1)
    • 73.0 mm(4)
    • 73.101 mm(2)
    • 73.3 mm(1)
    • 73.8 mm(1)
    • 74.4 mm(1)
    • 74.9 mm(1)
    • 75.5 mm(1)
    • 75.7 mm(1)
    • 75.9 mm(1)
    • 76.101 mm(1)
    • 76.2 mm(2)
    • 76.3 mm(1)
    • 76.5 mm(2)
    • 76.801 mm(1)
    • 77.101 mm(2)
    • 77.7 mm(2)
    • 78.601 mm(1)
    • 78.9 mm(2)
    • 79.4 mm(1)
    • 79.5 mm(1)
    • 79.601 mm(1)
    • 79.801 mm(2)
    • 80.301 mm(1)
    • 80.4 mm(1)
    • 80.601 mm(1)
    • 81.101 mm(1)
    • 81.2 mm(1)
    • 81.9 mm(1)
    • 82.2 mm(2)
    • 82.4 mm(2)
    • 82.601 mm(1)
    • 83.2 mm(1)
    • 83.5 mm(2)
    • 83.7 mm(1)
    • 84.2 mm(1)
    • 84.801 mm(3)
    • 84.9 mm(1)
    • 85.301 mm(1)
    • 85.801 mm(1)
    • 86.0 mm(1)
    • 86.7 mm(2)
    • 87.2 mm(3)
    • 88.2 mm(1)
    • 88.5 mm(1)
    • 88.801 mm(1)
    • 89.0 mm(1)
    • 89.2 mm(1)
    • 90.5 mm(2)
    • 90.601 mm(1)
    • 90.7 mm(1)
    • 90.801 mm(2)
    • 90.9 mm(1)
    • 91.2 mm(2)
    • 92.301 mm(1)
    • 93.2 mm(1)
    • 93.7 mm(1)
    • 94.5 mm(2)
    • 95.101 mm(1)
    • 95.7 mm(2)
    • 96.101 mm(2)
    • 96.5 mm(1)
    • 96.601 mm(1)
    • 97.0 mm(1)
    • 97.2 mm(1)
    • 98.101 mm(1)
    • 99.801 mm(1)
    • 100.101 mm(2)
    • 101.4 mm(1)
    • 101.5 mm(1)
    • 102.0 mm(2)
    • 102.2 mm(1)
    • 102.601 mm(1)
    • 103.5 mm(1)
    • 104.301 mm(1)
    • 104.601 mm(2)
    • 105.601 mm(1)
    • 106.9 mm(1)
    • 107.0 mm(1)
    • 108.601 mm(1)
    • 109.0 mm(2)
    • 109.301 mm(1)
    • 109.801 mm(1)
    • 110.101 mm(1)
    • 111.4 mm(1)
    • 112.5 mm(1)
    • 113.5 mm(2)
    • 113.7 mm(1)
    • 113.801 mm(1)
    • 114.301 mm(1)
    • 115.801 mm(1)
    • 116.4 mm(1)
    • 117.9 mm(3)
    • 118.2 mm(2)
    • 119.4 mm(1)
    • 119.5 mm(1)
    • 120.301 mm(1)
    • 122.101 mm(1)
    • 122.4 mm(2)
    • 122.801 mm(1)
    • 123.801 mm(2)
    • 124.601 mm(1)
    • 126.801 mm(2)
    • 129.0 mm(1)
    • 129.201 mm(1)
    • 129.5 mm(2)
    • 129.9 mm(1)
    • 131.201 mm(1)
    • 131.8 mm(1)
    • 133.5 mm(1)
    • 135.201 mm(2)
    • 135.701 mm(2)
    • 135.9 mm(1)
    • 138.201 mm(1)
    • 138.6 mm(1)
    • 140.8 mm(2)
    • 142.1 mm(1)
    • 144.1 mm(2)
    • 146.3 mm(1)
    • 146.5 mm(2)
    • 147.5 mm(1)
    • 148.6 mm(1)
    • 153.0 mm(2)
    • 153.601 mm(1)
    • 154.9 mm(1)
    • 156.201 mm(1)
    • 161.4 mm(1)
    • 161.5 mm(1)
    • 162.601 mm(1)
    • 163.3 mm(1)
    • 164.0 mm(1)
    • 167.8 mm(1)
    • 170.701 mm(1)
    • 171.3 mm(1)
    • 172.5 mm(1)
    • 174.3 mm(1)
    • 179.4 mm(1)
    • 179.5 mm(1)
    • 180.601 mm(1)
    • 181.201 mm(2)
    • 187.0 mm(1)
    • 189.8 mm(2)
    • 193.5 mm(1)
    • 198.5 mm(2)
    • 205.601 mm(1)
    • 207.201 mm(2)
    • 215.8 mm(2)
    • 218.5 mm(1)
    • 224.5 mm(2)
    • 231.201 mm(1)
    • 243.0 mm(1)
    • 255.5 mm(1)
    • 265.2 mm(1)
    • 277.8 mm(1)
    • 290.5 mm(1)
    • 303.1 mm(1)
    • 315.8 mm(1)
    • 328.5 mm(1)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • BF Drill Shank (40)
    • Cylindrical Shank 1 Flat (187)
    • Straight-Cylindrical (168)
    • Straight-Cylindrical w/Flange (24)
    Number of Flutes
    Number of Flutes
    • 2 (395)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.244 in(1)
    • 2.283 in(1)
    • 2.362 in(2)
    • 2.402 in(1)
    • 2.638 in(1)
    • 2.677 in(2)
    • 2.717 in(3)
    • 2.757 in(3)
    • 2.795 in(1)
    • 2.835 in(1)
    • 2.874 in(2)
    • 3.001 in(1)
    • 3.071 in(1)
    • 3.11 in(2)
    • 3.15 in(3)
    • 3.189 in(4)
    • 3.228 in(3)
    • 3.269 in(3)
    • 3.307 in(5)
    • 3.346 in(3)
    • 3.426 in(1)
    • 3.465 in(1)
    • 3.504 in(1)
    • 3.543 in(2)
    • 3.583 in(3)
    • 3.622 in(3)
    • 3.632 in(1)
    • 3.661 in(4)
    • 3.681 in(1)
    • 3.701 in(4)
    • 3.74 in(5)
    • 3.781 in(2)
    • 3.819 in(2)
    • 3.858 in(4)
    • 3.898 in(1)
    • 3.938 in(4)
    • 3.976 in(2)
    • 4.016 in(3)
    • 4.055 in(4)
    • 4.094 in(4)
    • 4.114 in(1)
    • 4.134 in(6)
    • 4.173 in(2)
    • 4.194 in(1)
    • 4.213 in(4)
    • 4.252 in(4)
    • 4.291 in(6)
    • 4.311 in(1)
    • 4.331 in(4)
    • 4.37 in(6)
    • 4.409 in(2)
    • 4.449 in(7)
    • 4.488 in(6)
    • 4.529 in(1)
    • 4.567 in(8)
    • 4.577 in(1)
    • 4.606 in(3)
    • 4.646 in(3)
    • 4.686 in(3)
    • 4.724 in(1)
    • 4.764 in(2)
    • 4.783 in(1)
    • 4.803 in(5)
    • 4.843 in(2)
    • 4.882 in(2)
    • 4.902 in(1)
    • 4.921 in(7)
    • 4.941 in(1)
    • 4.961 in(2)
    • 5.0 in(8)
    • 5.039 in(3)
    • 5.079 in(4)
    • 5.118 in(5)
    • 5.157 in(4)
    • 5.197 in(5)
    • 5.236 in(2)
    • 5.276 in(4)
    • 5.295 in(1)
    • 5.315 in(4)
    • 5.354 in(2)
    • 5.394 in(3)
    • 5.433 in(2)
    • 5.492 in(1)
    • 5.513 in(3)
    • 5.551 in(2)
    • 5.591 in(7)
    • 5.63 in(4)
    • 5.67 in(1)
    • 5.71 in(3)
    • 5.728 in(1)
    • 5.748 in(6)
    • 5.787 in(3)
    • 5.827 in(3)
    • 5.867 in(2)
    • 5.906 in(3)
    • 5.984 in(3)
    • 6.024 in(1)
    • 6.063 in(1)
    • 6.102 in(2)
    • 6.142 in(3)
    • 6.181 in(3)
    • 6.22 in(4)
    • 6.299 in(2)
    • 6.339 in(2)
    • 6.378 in(6)
    • 6.417 in(1)
    • 6.457 in(5)
    • 6.535 in(1)
    • 6.575 in(4)
    • 6.614 in(5)
    • 6.732 in(1)
    • 6.772 in(4)
    • 6.811 in(1)
    • 6.851 in(1)
    • 6.891 in(1)
    • 6.929 in(3)
    • 7.047 in(1)
    • 7.087 in(3)
    • 7.126 in(3)
    • 7.244 in(3)
    • 7.323 in(4)
    • 7.402 in(4)
    • 7.521 in(3)
    • 7.559 in(2)
    • 7.718 in(5)
    • 7.795 in(1)
    • 7.913 in(3)
    • 7.992 in(1)
    • 8.031 in(2)
    • 8.071 in(2)
    • 8.11 in(3)
    • 8.268 in(1)
    • 8.307 in(3)
    • 8.387 in(2)
    • 8.504 in(5)
    • 8.544 in(1)
    • 8.701 in(2)
    • 8.74 in(1)
    • 8.819 in(1)
    • 8.858 in(1)
    • 8.976 in(1)
    • 9.134 in(1)
    • 9.173 in(1)
    • 9.214 in(1)
    • 9.371 in(2)
    • 9.449 in(1)
    • 9.685 in(3)
    • 9.921 in(1)
    • 10.0 in(2)
    • 10.315 in(2)
    • 10.592 in(1)
    • 10.63 in(2)
    • 10.945 in(2)
    • 11.063 in(1)
    • 11.26 in(2)
    • 11.535 in(1)
    • 11.576 in(2)
    • 12.362 in(1)
    • 12.835 in(1)
    • 13.307 in(1)
    • 13.781 in(1)
    • 14.252 in(1)
    • 14.724 in(1)
    • 15.198 in(1)
    • 15.669 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 57.0 mm(1)
    • 58.0 mm(1)
    • 60.0 mm(2)
    • 61.0 mm(1)
    • 67.0 mm(1)
    • 68.0 mm(2)
    • 69.0 mm(3)
    • 70.0 mm(3)
    • 71.0 mm(1)
    • 72.0 mm(1)
    • 73.0 mm(2)
    • 76.226 mm(1)
    • 78.0 mm(1)
    • 79.0 mm(2)
    • 80.0 mm(3)
    • 81.0 mm(4)
    • 82.0 mm(3)
    • 83.0 mm(3)
    • 84.0 mm(5)
    • 85.0 mm(3)
    • 87.0 mm(1)
    • 88.0 mm(1)
    • 89.0 mm(1)
    • 90.0 mm(2)
    • 91.0 mm(3)
    • 92.0 mm(3)
    • 92.226 mm(1)
    • 93.0 mm(4)
    • 93.5 mm(1)
    • 94.0 mm(4)
    • 95.0 mm(5)
    • 96.0 mm(2)
    • 97.0 mm(2)
    • 98.0 mm(4)
    • 99.0 mm(1)
    • 100.0 mm(4)
    • 101.0 mm(2)
    • 102.0 mm(3)
    • 103.0 mm(4)
    • 104.0 mm(4)
    • 104.5 mm(1)
    • 105.0 mm(6)
    • 106.0 mm(2)
    • 106.5 mm(1)
    • 107.0 mm(4)
    • 108.0 mm(4)
    • 109.0 mm(6)
    • 109.5 mm(1)
    • 110.0 mm(4)
    • 111.0 mm(6)
    • 112.0 mm(2)
    • 113.0 mm(7)
    • 114.0 mm(6)
    • 115.0 mm(1)
    • 116.0 mm(8)
    • 116.226 mm(1)
    • 117.0 mm(3)
    • 118.0 mm(3)
    • 119.0 mm(3)
    • 120.0 mm(1)
    • 121.0 mm(2)
    • 121.5 mm(1)
    • 122.0 mm(5)
    • 123.0 mm(2)
    • 124.0 mm(2)
    • 124.5 mm(1)
    • 125.0 mm(7)
    • 125.5 mm(1)
    • 126.0 mm(2)
    • 127.0 mm(8)
    • 128.0 mm(3)
    • 129.0 mm(4)
    • 130.0 mm(5)
    • 131.0 mm(4)
    • 132.0 mm(5)
    • 133.0 mm(2)
    • 134.0 mm(4)
    • 134.5 mm(1)
    • 135.0 mm(4)
    • 136.0 mm(2)
    • 137.0 mm(3)
    • 138.0 mm(2)
    • 139.5 mm(1)
    • 140.0 mm(3)
    • 141.0 mm(2)
    • 142.0 mm(7)
    • 143.0 mm(4)
    • 144.0 mm(1)
    • 145.0 mm(3)
    • 145.5 mm(1)
    • 146.0 mm(6)
    • 147.0 mm(3)
    • 148.0 mm(3)
    • 149.0 mm(2)
    • 150.0 mm(3)
    • 152.0 mm(3)
    • 153.0 mm(1)
    • 154.0 mm(1)
    • 155.0 mm(2)
    • 156.0 mm(3)
    • 157.0 mm(3)
    • 158.0 mm(4)
    • 160.0 mm(2)
    • 161.0 mm(2)
    • 162.0 mm(6)
    • 163.0 mm(1)
    • 164.0 mm(5)
    • 166.0 mm(1)
    • 167.0 mm(4)
    • 168.0 mm(5)
    • 171.0 mm(1)
    • 172.0 mm(4)
    • 173.0 mm(1)
    • 174.0 mm(1)
    • 175.0 mm(1)
    • 176.0 mm(3)
    • 179.0 mm(1)
    • 180.0 mm(3)
    • 181.0 mm(3)
    • 184.0 mm(3)
    • 186.0 mm(4)
    • 188.0 mm(4)
    • 191.0 mm(3)
    • 192.0 mm(2)
    • 196.0 mm(5)
    • 198.0 mm(1)
    • 201.0 mm(3)
    • 203.0 mm(1)
    • 204.0 mm(2)
    • 205.0 mm(2)
    • 206.0 mm(3)
    • 210.0 mm(1)
    • 211.0 mm(3)
    • 213.0 mm(2)
    • 216.0 mm(5)
    • 217.0 mm(1)
    • 221.0 mm(2)
    • 222.0 mm(1)
    • 224.0 mm(1)
    • 225.0 mm(1)
    • 228.0 mm(1)
    • 232.0 mm(1)
    • 233.0 mm(1)
    • 234.0 mm(1)
    • 238.0 mm(2)
    • 240.0 mm(1)
    • 246.0 mm(3)
    • 252.0 mm(1)
    • 254.0 mm(2)
    • 262.0 mm(2)
    • 269.0 mm(1)
    • 270.0 mm(2)
    • 278.0 mm(2)
    • 281.0 mm(1)
    • 286.0 mm(2)
    • 293.0 mm(1)
    • 294.0 mm(2)
    • 314.0 mm(1)
    • 326.0 mm(1)
    • 338.0 mm(1)
    • 350.0 mm(1)
    • 362.0 mm(1)
    • 374.0 mm(1)
    • 386.0 mm(1)
    • 398.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(788)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(788)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (68)
    • KC7015 (68)
    • KC7215 (68)
    • KC7315 (69)
    • KC7325 (594)
    • KC7410 (547)
    • KCC10 (76)
    • KCMS15 (545)
    • KCP15 (1)
    • KCP15A (750)
    • KCPM45 (1)
    • KMF (68)
    • KN15 (176)
    Hand Of Tool
    Hand Of Tool
    • R (395)
    Wiper Insert
    Wiper Insert
    • N (788)
    Drill Type
    Drill Type
    • 86-01 (395)
    Countersunk Angle
    Countersunk Angle
    • 41.0 (68)
    • 45.0 (68)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Insert Shape
    Insert Shape
    • COUNTERBORE/COUNTERSINK MISC (68)
    • KENTIP DRILL (1)
    • KENTIP FUSION DRILL (1206)
    Point Angle
    Point Angle
    • 128.0 (185)
    • 140.0 (722)
    • 143.0 (817)
    • 180.0 (480)
    Point Angle MintoPoint Angle Max
    Insert Geometry
    Shape
    Shape
    • KENTIP FUSION DRILL (788)
    Insert Seat Size
    Insert Seat Size
    • A (8)
    • B (16)
    • C (15)
    • D (12)
    • E (21)
    • F (23)
    • G (26)
    • H (20)
    • I (34)
    • J (29)
    • K (24)
    • L (25)
    • M (24)
    • N (19)
    • O (22)
    • P (24)
    • Q (22)
    • R (23)
    • S (19)
    • T (43)
    • U (46)
    • V (46)
    • W (34)
    • X (52)
    • Y (29)
    • Z (24)
    • ZA (25)
    • ZB (25)
    • ZC (21)
    • ZD (37)
    Cutting Tool Material
    Cutting Tool Material
    • D P (9)
    • H W (778)
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 0.237 in(5)
    • 0.24 in(1)
    • 0.244 in(2)
    • 0.248 in(1)
    • 0.25 in(7)
    • 0.252 in(1)
    • 0.256 in(5)
    • 0.257 in(2)
    • 0.26 in(1)
    • 0.261 in(2)
    • 0.264 in(1)
    • 0.266 in(3)
    • 0.268 in(6)
    • 0.272 in(2)
    • 0.276 in(5)
    • 0.28 in(1)
    • 0.281 in(2)
    • 0.284 in(1)
    • 0.288 in(1)
    • 0.29 in(1)
    • 0.291 in(1)
    • 0.295 in(5)
    • 0.297 in(1)
    • 0.299 in(2)
    • 0.303 in(1)
    • 0.307 in(2)
    • 0.311 in(1)
    • 0.313 in(9)
    • 0.315 in(6)
    • 0.319 in(4)
    • 0.322 in(1)
    • 0.323 in(4)
    • 0.327 in(2)
    • 0.328 in(3)
    • 0.331 in(2)
    • 0.332 in(1)
    • 0.335 in(6)
    • 0.336 in(1)
    • 0.339 in(5)
    • 0.343 in(4)
    • 0.345 in(3)
    • 0.347 in(3)
    • 0.349 in(1)
    • 0.351 in(3)
    • 0.354 in(6)
    • 0.358 in(4)
    • 0.359 in(1)
    • 0.362 in(2)
    • 0.366 in(2)
    • 0.368 in(2)
    • 0.37 in(3)
    • 0.374 in(5)
    • 0.375 in(8)
    • 0.376 in(3)
    • 0.378 in(4)
    • 0.382 in(4)
    • 0.386 in(4)
    • 0.39 in(3)
    • 0.391 in(3)
    • 0.394 in(6)
    • 0.395 in(1)
    • 0.397 in(1)
    • 0.398 in(3)
    • 0.402 in(5)
    • 0.404 in(1)
    • 0.406 in(4)
    • 0.408 in(4)
    • 0.41 in(3)
    • 0.414 in(6)
    • 0.417 in(4)
    • 0.421 in(4)
    • 0.422 in(3)
    • 0.425 in(5)
    • 0.429 in(3)
    • 0.433 in(5)
    • 0.437 in(6)
    • 0.438 in(7)
    • 0.441 in(3)
    • 0.445 in(2)
    • 0.449 in(2)
    • 0.453 in(8)
    • 0.457 in(3)
    • 0.461 in(2)
    • 0.465 in(5)
    • 0.47 in(6)
    • 0.473 in(5)
    • 0.477 in(2)
    • 0.48 in(3)
    • 0.484 in(5)
    • 0.488 in(2)
    • 0.491 in(2)
    • 0.492 in(5)
    • 0.496 in(2)
    • 0.5 in(9)
    • 0.504 in(3)
    • 0.508 in(3)
    • 0.512 in(5)
    • 0.516 in(4)
    • 0.52 in(4)
    • 0.523 in(1)
    • 0.524 in(3)
    • 0.527 in(1)
    • 0.528 in(2)
    • 0.531 in(9)
    • 0.535 in(3)
    • 0.539 in(2)
    • 0.543 in(4)
    • 0.547 in(6)
    • 0.549 in(2)
    • 0.551 in(5)
    • 0.555 in(4)
    • 0.559 in(3)
    • 0.564 in(8)
    • 0.568 in(3)
    • 0.572 in(5)
    • 0.576 in(3)
    • 0.578 in(5)
    • 0.579 in(1)
    • 0.583 in(4)
    • 0.587 in(1)
    • 0.591 in(5)
    • 0.594 in(3)
    • 0.595 in(4)
    • 0.598 in(4)
    • 0.602 in(4)
    • 0.605 in(1)
    • 0.606 in(1)
    • 0.609 in(2)
    • 0.61 in(5)
    • 0.614 in(3)
    • 0.618 in(2)
    • 0.622 in(3)
    • 0.625 in(5)
    • 0.626 in(1)
    • 0.63 in(5)
    • 0.631 in(1)
    • 0.633 in(1)
    • 0.634 in(7)
    • 0.636 in(1)
    • 0.638 in(3)
    • 0.641 in(3)
    • 0.642 in(3)
    • 0.646 in(2)
    • 0.65 in(5)
    • 0.652 in(1)
    • 0.654 in(3)
    • 0.656 in(5)
    • 0.657 in(2)
    • 0.661 in(2)
    • 0.665 in(2)
    • 0.669 in(5)
    • 0.672 in(3)
    • 0.673 in(3)
    • 0.677 in(3)
    • 0.681 in(3)
    • 0.685 in(2)
    • 0.687 in(4)
    • 0.689 in(3)
    • 0.69 in(5)
    • 0.694 in(3)
    • 0.698 in(5)
    • 0.702 in(3)
    • 0.704 in(2)
    • 0.705 in(2)
    • 0.709 in(5)
    • 0.713 in(3)
    • 0.717 in(1)
    • 0.719 in(4)
    • 0.72 in(2)
    • 0.724 in(2)
    • 0.728 in(5)
    • 0.732 in(3)
    • 0.734 in(2)
    • 0.736 in(3)
    • 0.74 in(2)
    • 0.744 in(2)
    • 0.748 in(5)
    • 0.75 in(5)
    • 0.752 in(2)
    • 0.756 in(4)
    • 0.757 in(2)
    • 0.758 in(3)
    • 0.759 in(4)
    • 0.76 in(2)
    • 0.762 in(3)
    • 0.764 in(1)
    • 0.766 in(4)
    • 0.768 in(5)
    • 0.772 in(1)
    • 0.776 in(2)
    • 0.78 in(3)
    • 0.781 in(4)
    • 0.784 in(2)
    • 0.787 in(5)
    • 0.791 in(2)
    • 0.795 in(2)
    • 0.797 in(2)
    • 0.799 in(2)
    • 0.807 in(5)
    • 0.811 in(2)
    • 0.814 in(5)
    • 0.816 in(1)
    • 0.82 in(1)
    • 0.824 in(1)
    • 0.828 in(6)
    • 0.832 in(2)
    • 0.833 in(1)
    • 0.835 in(2)
    • 0.839 in(1)
    • 0.843 in(1)
    • 0.844 in(2)
    • 0.846 in(5)
    • 0.854 in(1)
    • 0.858 in(2)
    • 0.859 in(1)
    • 0.862 in(1)
    • 0.866 in(5)
    • 0.87 in(1)
    • 0.874 in(2)
    • 0.875 in(5)
    • 0.882 in(1)
    • 0.884 in(1)
    • 0.886 in(5)
    • 0.89 in(1)
    • 0.894 in(1)
    • 0.898 in(2)
    • 0.902 in(1)
    • 0.906 in(5)
    • 0.909 in(1)
    • 0.913 in(2)
    • 0.917 in(1)
    • 0.921 in(1)
    • 0.922 in(2)
    • 0.925 in(5)
    • 0.929 in(1)
    • 0.933 in(1)
    • 0.937 in(5)
    • 0.942 in(1)
    • 0.946 in(5)
    • 0.95 in(1)
    • 0.954 in(1)
    • 0.958 in(1)
    • 0.961 in(1)
    • 0.965 in(5)
    • 0.969 in(3)
    • 0.972 in(2)
    • 0.976 in(1)
    • 0.98 in(1)
    • 0.984 in(5)
    • 0.987 in(1)
    • 0.988 in(1)
    • 0.992 in(1)
    • 0.994 in(1)
    • 0.996 in(1)
    • 1.0 in(5)
    • 1.004 in(4)
    • 1.006 in(1)
    • 1.008 in(2)
    • 1.01 in(1)
    • 1.012 in(5)
    • 1.016 in(3)
    • 1.02 in(1)
    • 1.024 in(5)
    Cutting Diameter Insert MintoCutting Diameter Insert Max
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 6.0 mm(5)
    • 6.101 mm(1)
    • 6.2 mm(2)
    • 6.301 mm(1)
    • 6.351 mm(7)
    • 6.4 mm(1)
    • 6.5 mm(5)
    • 6.525 mm(2)
    • 6.601 mm(1)
    • 6.625 mm(2)
    • 6.7 mm(1)
    • 6.75 mm(3)
    • 6.801 mm(6)
    • 6.9 mm(2)
    • 7.0 mm(5)
    • 7.101 mm(1)
    • 7.15 mm(2)
    • 7.2 mm(1)
    • 7.301 mm(1)
    • 7.375 mm(1)
    • 7.4 mm(1)
    • 7.5 mm(5)
    • 7.551 mm(1)
    • 7.601 mm(2)
    • 7.7 mm(1)
    • 7.801 mm(2)
    • 7.9 mm(1)
    • 7.95 mm(9)
    • 8.0 mm(6)
    • 8.1 mm(4)
    • 8.175 mm(1)
    • 8.201 mm(4)
    • 8.3 mm(2)
    • 8.326 mm(3)
    • 8.4 mm(2)
    • 8.425 mm(1)
    • 8.5 mm(6)
    • 8.525 mm(1)
    • 8.6 mm(5)
    • 8.701 mm(4)
    • 8.725 mm(3)
    • 8.8 mm(3)
    • 8.85 mm(1)
    • 8.9 mm(3)
    • 9.0 mm(6)
    • 9.1 mm(4)
    • 9.125 mm(1)
    • 9.201 mm(2)
    • 9.3 mm(2)
    • 9.35 mm(2)
    • 9.4 mm(3)
    • 9.5 mm(5)
    • 9.525 mm(8)
    • 9.55 mm(3)
    • 9.601 mm(4)
    • 9.701 mm(4)
    • 9.8 mm(4)
    • 9.9 mm(3)
    • 9.925 mm(3)
    • 10.0 mm(6)
    • 10.025 mm(1)
    • 10.076 mm(1)
    • 10.101 mm(3)
    • 10.201 mm(5)
    • 10.25 mm(1)
    • 10.3 mm(4)
    • 10.326 mm(4)
    • 10.4 mm(3)
    • 10.5 mm(6)
    • 10.601 mm(4)
    • 10.701 mm(4)
    • 10.726 mm(3)
    • 10.8 mm(5)
    • 10.9 mm(3)
    • 11.0 mm(5)
    • 11.101 mm(6)
    • 11.125 mm(7)
    • 11.201 mm(3)
    • 11.3 mm(2)
    • 11.4 mm(2)
    • 11.5 mm(8)
    • 11.601 mm(3)
    • 11.701 mm(2)
    • 11.8 mm(5)
    • 11.9 mm(6)
    • 12.0 mm(5)
    • 12.101 mm(2)
    • 12.201 mm(3)
    • 12.3 mm(5)
    • 12.4 mm(2)
    • 12.476 mm(2)
    • 12.5 mm(5)
    • 12.601 mm(2)
    • 12.701 mm(9)
    • 12.8 mm(3)
    • 12.9 mm(3)
    • 13.0 mm(5)
    • 13.101 mm(4)
    • 13.201 mm(4)
    • 13.275 mm(1)
    • 13.3 mm(3)
    • 13.375 mm(1)
    • 13.4 mm(2)
    • 13.5 mm(9)
    • 13.601 mm(3)
    • 13.701 mm(2)
    • 13.8 mm(4)
    • 13.9 mm(6)
    • 13.951 mm(2)
    • 14.0 mm(5)
    • 14.101 mm(4)
    • 14.201 mm(3)
    • 14.3 mm(8)
    • 14.4 mm(3)
    • 14.5 mm(5)
    • 14.601 mm(3)
    • 14.675 mm(5)
    • 14.701 mm(1)
    • 14.8 mm(4)
    • 14.9 mm(1)
    • 15.0 mm(5)
    • 15.076 mm(3)
    • 15.101 mm(4)
    • 15.201 mm(4)
    • 15.3 mm(4)
    • 15.375 mm(1)
    • 15.4 mm(1)
    • 15.476 mm(2)
    • 15.5 mm(5)
    • 15.601 mm(3)
    • 15.701 mm(2)
    • 15.8 mm(3)
    • 15.875 mm(5)
    • 15.9 mm(1)
    • 16.0 mm(5)
    • 16.026 mm(1)
    • 16.075 mm(1)
    • 16.1 mm(7)
    • 16.151 mm(1)
    • 16.2 mm(3)
    • 16.276 mm(3)
    • 16.3 mm(3)
    • 16.401 mm(2)
    • 16.5 mm(5)
    • 16.55 mm(1)
    • 16.6 mm(3)
    • 16.675 mm(5)
    • 16.7 mm(2)
    • 16.8 mm(2)
    • 16.901 mm(2)
    • 17.0 mm(5)
    • 17.075 mm(3)
    • 17.1 mm(3)
    • 17.2 mm(3)
    • 17.3 mm(3)
    • 17.401 mm(2)
    • 17.45 mm(4)
    • 17.475 mm(3)
    • 17.5 mm(5)
    • 17.6 mm(3)
    • 17.7 mm(5)
    • 17.8 mm(3)
    • 17.85 mm(2)
    • 17.901 mm(2)
    • 18.0 mm(5)
    • 18.1 mm(3)
    • 18.2 mm(1)
    • 18.25 mm(4)
    • 18.3 mm(2)
    • 18.401 mm(2)
    • 18.5 mm(5)
    • 18.6 mm(3)
    • 18.651 mm(2)
    • 18.7 mm(3)
    • 18.8 mm(2)
    • 18.901 mm(2)
    • 19.0 mm(5)
    • 19.05 mm(5)
    • 19.1 mm(2)
    • 19.201 mm(4)
    • 19.225 mm(2)
    • 19.25 mm(3)
    • 19.276 mm(4)
    • 19.3 mm(2)
    • 19.35 mm(3)
    • 19.401 mm(1)
    • 19.451 mm(4)
    • 19.5 mm(5)
    • 19.6 mm(1)
    • 19.701 mm(2)
    • 19.8 mm(3)
    • 19.85 mm(4)
    • 19.901 mm(2)
    • 20.0 mm(5)
    • 20.1 mm(2)
    • 20.201 mm(2)
    • 20.25 mm(2)
    • 20.3 mm(2)
    • 20.5 mm(5)
    • 20.6 mm(2)
    • 20.651 mm(5)
    • 20.701 mm(1)
    • 20.8 mm(1)
    • 20.901 mm(1)
    • 21.0 mm(6)
    • 21.1 mm(2)
    • 21.151 mm(1)
    • 21.201 mm(2)
    • 21.3 mm(1)
    • 21.401 mm(1)
    • 21.425 mm(2)
    • 21.5 mm(5)
    • 21.701 mm(1)
    • 21.8 mm(2)
    • 21.826 mm(1)
    • 21.901 mm(1)
    • 22.0 mm(5)
    • 22.1 mm(1)
    • 22.201 mm(2)
    • 22.225 mm(5)
    • 22.401 mm(1)
    • 22.451 mm(1)
    • 22.5 mm(5)
    • 22.6 mm(1)
    • 22.701 mm(1)
    • 22.8 mm(2)
    • 22.901 mm(1)
    • 23.0 mm(5)
    • 23.1 mm(1)
    • 23.201 mm(2)
    • 23.3 mm(1)
    • 23.401 mm(1)
    • 23.425 mm(2)
    • 23.5 mm(5)
    • 23.6 mm(1)
    • 23.701 mm(1)
    • 23.8 mm(5)
    • 23.901 mm(1)
    • 24.0 mm(5)
    • 24.1 mm(1)
    • 24.201 mm(1)
    • 24.3 mm(1)
    • 24.401 mm(1)
    • 24.5 mm(5)
    • 24.6 mm(3)
    • 24.701 mm(2)
    • 24.8 mm(1)
    • 24.901 mm(1)
    • 25.0 mm(5)
    • 25.076 mm(1)
    • 25.1 mm(1)
    • 25.201 mm(1)
    • 25.25 mm(1)
    • 25.3 mm(1)
    • 25.401 mm(5)
    • 25.5 mm(4)
    • 25.55 mm(1)
    • 25.6 mm(2)
    • 25.651 mm(1)
    • 25.675 mm(4)
    • 25.701 mm(1)
    • 25.8 mm(3)
    • 25.901 mm(1)
    • 26.0 mm(5)
    Cutting Diameter Insert MintoCutting Diameter Insert Max
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (419)
    Back-End Diameter
    Back-End Diameter
    • 7.95 mm(15)
    • 8.0 mm(22)
    • 9.0 mm(2)
    • 9.525 mm(12)
    • 10.0 mm(21)
    • 11.0 mm(4)
    • 11.125 mm(9)
    • 12.0 mm(46)
    • 12.701 mm(21)
    • 13.0 mm(4)
    • 14.0 mm(21)
    • 14.3 mm(9)
    • 15.0 mm(5)
    • 15.875 mm(39)
    • 16.0 mm(70)
    • 18.0 mm(4)
    • 19.05 mm(18)
    • 20.0 mm(27)
    • 25.0 mm(46)
    • 25.401 mm(24)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.313 in(15)
    • 0.315 in(22)
    • 0.354 in(2)
    • 0.375 in(12)
    • 0.394 in(21)
    • 0.433 in(4)
    • 0.438 in(9)
    • 0.473 in(46)
    • 0.5 in(21)
    • 0.512 in(4)
    • 0.551 in(21)
    • 0.564 in(9)
    • 0.591 in(5)
    • 0.625 in(39)
    • 0.63 in(70)
    • 0.709 in(4)
    • 0.75 in(18)
    • 0.787 in(27)
    • 0.984 in(46)
    • 1.0 in(24)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?