KenDrill™ HPS • 40 x D • Internal Coolant • Straight Shank • Metric
Producto similar a:
KenDrill™ HPS • 40 x D • Internal Coolant • Straight Shank • Metric
Brocas de agujeros profundos Beyond™ SC • Múltiples materiales • Refrigeración interior
Número de material100161764
Póngase en contacto con nuestro equipo de ventas para descubrir todas sus opciones de precios
Features and benefits
- HP solid carbide deep-hole drills with through coolant for steel, cast iron, stainless steel, high-temperature alloys, and non-ferrous materials.
- Application-specific SC drill for drilling holes up to 40 x D up to 4x faster than conventional HSS and gun drills.
- Broadest diameter range on the market from .0938–.6299″ (2,383–16mm).
- KMH-point geometry is available as a semi-standard, especially for crankshaft applications.
- KN25™ uncoated grade (B27_HPS) with highly polished surface ensures superior chip evacuation and prevent built-up edge in aluminum and high-temp alloys, even when low-pressure coolant or MQL is applied.
Drilling: Stacked Plates
Taladrado
Taladrado: Salida inclinada
Dimensiones de la herramienta: 2 canales/4 márgenes/refrigerante
Número DIN 6535
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Drilling: Cross-Hole Drilling
| Tolerancia • Pulgadas | ||||
| gama de tamaños nominales | D1 tolerancia m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| N | 1 | 120 | 200 | 300 | mm/r | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
| Grupo de materiales | | | |||||||||||
| Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 0.551 | 5/8 .625 | |||
| N | 1 | 390 | 660 | 980 | IPR | 0.005-0.007 | 0.005-0.007 | 0.006-0.009 | 0.008-0.011 | 0.010-0.014 | 0.012-0.016 | 0.014-0.018 | 0.016-0.020 |
| 2 | 390 | 560 | 980 | IPR | 0.005-0.007 | 0.006-0.008 | 0.006-0.010 | 0.008-0.012 | 0.011-0.015 | 0.013-0.017 | 0.015–0.019 | 0.017-0.021 | |
| 3 | 330 | 490 | 980 | IPR | 0.005-0.007 | 0.006-0.008 | 0.006-0.010 | 0.008-0.012 | 0.011-0.015 | 0.013-0.017 | 0.015–0.019 | 0.017-0.021 | |
| 4 | 260 | 660 | 980 | IPR | 0.001-0.002 | 0.001-0.002 | 0.001-0.002 | 0.002-0.002 | 0.002–0.003 | 0.002–0.003 | 0.002–0.003 | 0.002-0.004 | |
| | ||||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| N | 1 | 120 | 200 | 300 | mm/r | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |