Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

TM711

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (19)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
    • M Stainless Steel (19)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
    • K Cast Iron (19)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (19)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(19)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
      • N6
        Carbon, Graphite Composites, CFRP (19)
    • S High-Temp Alloys (19)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
    Applications
    Applications
    • Thread MillingThread Milling (19)
    • ThreadingThreading (19)
    Cutting Diameter
    Cutting Diameter
    • 0.095 in(1)
    • 0.124 in(1)
    • 0.157 in(1)
    • 0.189 in(1)
    • 0.232 in(1)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.457 in(1)
    • 0.473 in(2)
    • 0.551 in(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.401 mm(1)
    • 3.151 mm(1)
    • 4.0 mm(1)
    • 4.801 mm(1)
    • 5.9 mm(1)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 11.601 mm(1)
    • 12.0 mm(2)
    • 14.0 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.25 mm(1)
    • 8.725 mm(1)
    • 10.775 mm(1)
    • 12.351 mm(1)
    • 16.45 mm(1)
    • 16.825 mm(2)
    • 20.201 mm(1)
    • 20.451 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.35 mm(1)
    • 28.0 mm(1)
    • 29.151 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 36.7 mm(1)
    • 41.151 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.246 in(1)
    • 0.345 in(1)
    • 0.424 in(1)
    • 0.486 in(1)
    • 0.648 in(1)
    • 0.662 in(2)
    • 0.795 in(1)
    • 0.805 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.998 in(1)
    • 1.102 in(1)
    • 1.149 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.445 in(1)
    • 1.62 in(2)
    Cutting Length MinkomuCutting Length Max
    Type of Thread
    Type of Thread
    • M (10)
    • MF (9)
    Thread Size
    Thread Size
    • M10 X 1.0 (1)
    • M10 X 1.5 (1)
    • M12 X 1.0 (1)
    • M12 X 1.5 (1)
    • M12 X 1.75 (1)
    • M14 X 1.5 (1)
    • M14 X 2.0 (1)
    • M16 X 1.5 (1)
    • M16 X 2.0 (1)
    • M18 X 1.5 (1)
    • M20 X 1.5 (1)
    • M20 X 2.5 (1)
    • M3 X 0.5 (1)
    • M4 X 0.7 (1)
    • M5 X 0.8 (1)
    • M6 X 1 (1)
    • M8 X 0.75 (1)
    • M8 X 1.0 (1)
    • M8 X 1.25 (1)
    Reach
    Reach
    • 0.648 in(1)
    • 0.662 in(1)
    • 0.797 in(1)
    • 0.805 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.998 in(1)
    • 1.149 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.445 in(1)
    • 1.62 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 16.45 mm(1)
    • 16.825 mm(1)
    • 20.25 mm(1)
    • 20.451 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.35 mm(1)
    • 29.151 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 36.7 mm(1)
    • 41.151 mm(2)
    Reach MinkomuReach Max
    Number of Flutes
    Number of Flutes
    • 3 (9)
    • 4 (10)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.655 in(1)
    • 2.165 in(3)
    • 2.48 in(3)
    • 2.757 in(2)
    • 3.15 in(4)
    • 3.543 in(6)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 42.0 mm(1)
    • 55.0 mm(3)
    • 63.0 mm(3)
    • 70.0 mm(2)
    • 80.0 mm(4)
    • 90.0 mm(6)
    Over All Length [L] MinkomuOver All Length [L] Max
    frontEnd
    Thread Pitch
    Thread Pitch
    • 0.5 mm(1)
    • 0.701 mm(1)
    • 0.75 mm(1)
    • 0.8 mm(1)
    • 1.0 mm(4)
    • 1.25 mm(1)
    • 1.5 mm(6)
    • 1.75 mm(1)
    • 2.0 mm(2)
    • 2.5 mm(1)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.02 in(1)
    • 0.028 in(1)
    • 0.03 in(1)
    • 0.031 in(1)
    • 0.039 in(4)
    • 0.049 in(1)
    • 0.06 in(6)
    • 0.069 in(1)
    • 0.079 in(2)
    • 0.098 in(1)
    Thread Pitch MinkomuThread Pitch Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(1)
    • 6.0 mm(6)
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 12.0 mm(3)
    • 14.0 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(1)
    • 0.237 in(6)
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.473 in(3)
    • 0.551 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    TM711 . Metrické Vnitřní chlazení
    (19)

    TM711 . Metrické Vnitřní chlazení

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?