Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Kazety

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
    • M Stainless Steel (2)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
    • K Cast Iron (2)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
    • N Non-Ferrous Materials (2)
      • N1
        Wrought Aluminum (2)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
      • N6
        Carbon, Graphite Composites, CFRP (2)
    • S High-Temp Alloys (2)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
    Applications
    Applications
    • Face GroovingFace Grooving (2)
    • GroovingGrooving (2)
    • ThreadingThreading (2)
    Type of Thread
    Type of Thread
    • 60 (2)
    • BUTTRESS (2)
    • M (1)
    • UN (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2)
    • Lightly Interrupted Cut (2)
    • Smooth Cut (2)
    • Varying Depth of Cut (2)
    Over All Length [L]
    Over All Length [L]
    • 2.165 in(1)
    • 2.192 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 55.0 mm(1)
    • 55.676 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(2)
    • 0.004 in(2)
    • 0.007 in(1)
    • 0.008 in(2)
    • 0.01 in(1)
    • 0.02 in(2)
    • 0.03 in(2)
    • 0.031 in(2)
    • 0.039 in(2)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.06 in(2)
    • 0.063 in(2)
    • 0.069 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(2)
    • 0.1 mm(2)
    • 0.176 mm(1)
    • 0.2 mm(2)
    • 0.25 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(2)
    • 0.775 mm(2)
    • 1.0 mm(2)
    • 1.201 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(2)
    • 1.6 mm(2)
    • 1.75 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (2)
    • K313 (2)
    • K420 (2)
    • K4H (1)
    • K68 (2)
    • KC250 (2)
    • KC5010 (2)
    • KC5025 (2)
    • KC5410 (2)
    • KC710 (2)
    • KC720 (2)
    • KC722 (2)
    • KC730 (2)
    • KC810 (2)
    • KC850 (2)
    • KC910 (1)
    • KC9110 (2)
    • KC9320 (2)
    • KC935 (2)
    • KC950 (2)
    • KCK20 (1)
    • KCK20B (2)
    • KCP10B (2)
    • KCP25B (2)
    • KCU10 (2)
    • KCU10B (2)
    • KCU25 (2)
    • KCU25B (2)
    • KT175 (2)
    • KT315 (2)
    • KU10T (2)
    • KU25T (2)
    • KU30T (2)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(2)
    • 0.031 in(2)
    • 0.035 in(2)
    • 0.039 in(2)
    • 0.041 in(2)
    • 0.047 in(2)
    • 0.055 in(2)
    • 0.058 in(2)
    • 0.06 in(2)
    • 0.062 in(2)
    • 0.067 in(2)
    • 0.069 in(2)
    • 0.077 in(2)
    • 0.079 in(2)
    • 0.088 in(2)
    • 0.089 in(2)
    • 0.095 in(2)
    • 0.098 in(2)
    • 0.108 in(2)
    • 0.119 in(2)
    • 0.125 in(2)
    • 0.126 in(2)
    • 0.128 in(2)
    • 0.129 in(2)
    • 0.138 in(2)
    • 0.147 in(1)
    • 0.15 in(1)
    • 0.151 in(1)
    • 0.152 in(2)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(2)
    • 0.775 mm(2)
    • 0.8 mm(2)
    • 0.9 mm(2)
    • 1.0 mm(2)
    • 1.05 mm(2)
    • 1.201 mm(2)
    • 1.401 mm(2)
    • 1.475 mm(2)
    • 1.5 mm(2)
    • 1.576 mm(2)
    • 1.701 mm(2)
    • 1.75 mm(2)
    • 1.951 mm(2)
    • 2.0 mm(2)
    • 2.2 mm(2)
    • 2.225 mm(2)
    • 2.25 mm(2)
    • 2.401 mm(2)
    • 2.5 mm(2)
    • 2.75 mm(2)
    • 3.0 mm(2)
    • 3.176 mm(2)
    • 3.2 mm(2)
    • 3.25 mm(2)
    • 3.276 mm(2)
    • 3.5 mm(2)
    • 3.725 mm(1)
    • 3.801 mm(1)
    • 3.825 mm(1)
    • 3.85 mm(2)
    Cutting Width MinkomuCutting Width Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H T (2)
    • H W (2)
    No filters matching ""
    NE-CA
    (2)

    NE-CA

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?