Drilling: Stacked Plates
Taladrado
Taladrado: Salida inclinada
Dimensiones de la herramienta: 2 canales/4 márgenes/refrigerante
Número DIN 6535
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 6351412 |
| Referencia ISO | B272Z14500SGL |
| Referencia ANSI | B272Z14500SGL |
| Calidad | KCMS20 |
| Diámetro de broca M [D1] | 14.5 mm |
| Diámetro de broca M [D1] | 0.5709 in |
| Longitud total [L] | 389 mm |
| Longitud total [L] | 15.31 in |
| Longitud del canal [L3] | 328 mm |
| Longitud del canal [L3] | 12.91 in |
| Profundidad máxima de taladrado [L4] | 297 mm |
| Profundidad máxima de taladrado [L4] | 11.69 in |
| Longitud de punta de broca [L5] | 2.46 mm |
| Longitud de punta de broca [L5] | 0.097 in |
| Longitud de mango [LS] | 54 mm |
| Longitud de mango [LS] | 2.13 in |
| Adaptador/Mango/Diá int [D] | 15 mm |
| Adaptador/Mango/Diá int [D] | 0.5906 in |
Drilling: Stacked PlatesTaladradoTaladrado: Salida inclinadaDimensiones de la herramienta: 2 canales/4 márgenes/refrigeranteNúmero DIN 6535Taladrado — Con refrigeración internaCon refrigeración interna: MQL (cantidad mínima de lubricante): TaladradoMango — Liso cilíndrico ≤h6Ángulo de la hélice: 30°Drilling: Cross-Hole DrillingGrades
KCMS20
Composición: Metal duro de grano ultrafino con recubrimiento de PVD AlTiN monocapa con excelente acabado superficial.
Aplicación: Primera opción para taladrado de orificios profundos de acero inoxidable y materiales resistentes a altas temperaturas. Debido a las propiedades mejoradas a altas temperaturas del recubrimiento, esta calidad también se puede aplicar en aplicaciones de MQL en acero.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Tolerancia • Pulgadas | ||||
| gama de tamaños nominales | D1 tolerancia m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| P | 0 | 100 | 100 | 125 | mm/r | 0,13–0,15 | 0,14–0,16 | 0,15–0,21 | 0,19–0,26 | 0,21–0,31 | 0,26–0,36 | 0,30–0,41 | 0,34–0,46 |
| 1 | 90 | 100 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 2 | 90 | 100 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 3 | 80 | 95 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 4 | 80 | 90 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 5 | 60 | 80 | 90 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,12–0,22 | 0,14–0,24 | |
| 6 | 110 | 150 | 190 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,12–0,20 | 0,15–0,28 | 0,17–0,33 | 0,19–0,37 | 0,20–0,40 | 0,22–0,43 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,06–0,12 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | 0,14–0,19 |
| 2 | 30 | 40 | 50 | mm/r | 0,04–0,08 | 0,06–0,10 | 0,08–0,13 | 0,09–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | |
| 3 | 30 | 40 | 50 | mm/r | 0,04–0,07 | 0,06–0,10 | 0,08–0,13 | 0,09–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | |
| K | 1 | 80 | 100 | 120 | mm/r | 0,15–0,19 | 0,17–0,20 | 0,19–0,26 | 0,24–0,32 | 0,27–0,40 | 0,32–0,45 | 0,38–0,52 | 0,45–0,59 |
| 2 | 80 | 90 | 100 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 3 | 60 | 90 | 120 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| Grupo de materiales | | | |||||||||||
| Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 0.551 | 5/8 .625 | |||
| P | 0 | 330 | 330 | 410 | IPR | 0.005-0.006 | 0.006–0.006 | 0.006-0.008 | 0.008-0.010 | 0.008-0.012 | 0.010-0.014 | 0.012-0.016 | 0.013–0.018 |
| 1 | 300 | 330 | 360 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| 2 | 300 | 330 | 360 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| 3 | 260 | 310 | 360 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| 4 | 260 | 300 | 360 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| 5 | 200 | 260 | 300 | IPR | 0.001-0.004 | 0.002-0.004 | 0.002-0.004 | 0.002-0.006 | 0.003–0.007 | 0.004–0.008 | 0.005-0.009 | 0.006-0.009 | |
| 6 | 360 | 490 | 620 | IPR | 0.003-0.005 | 0.004–0.004 | 0.005-0.008 | 0.006-0.011 | 0.007-0.013 | 0.008-0.015 | 0.008-0.016 | 0.009-0.017 | |
| M | 1 | 130 | 160 | 200 | IPR | 0.002–0.003 | 0.002-0.005 | 0.003-0.006 | 0.004-0.006 | 0.004-0.006 | 0.005-0.007 | 0.005-0.007 | 0.006-0.008 |
| 2 | 100 | 130 | 160 | IPR | 0.002–0.003 | 0.002-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004-0.006 | 0.004-0.006 | 0.005-0.007 | 0.005-0.007 | |
| 3 | 100 | 130 | 160 | IPR | 0.002–0.003 | 0.002-0.004 | 0.003-0.005 | 0.004-0.006 | 0.004-0.006 | 0.004-0.006 | 0.005-0.007 | 0.005-0.007 | |
| K | 1 | 260 | 330 | 390 | IPR | 0.006-0.008 | 0.007–0.008 | 0.008-0.010 | 0.009-0.013 | 0.011–0.016 | 0.013–0.018 | 0.015-0.021 | 0.018–0.023 |
| 2 | 260 | 300 | 330 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| 3 | 200 | 300 | 390 | IPR | 0.006-0.007 | 0.006-0.008 | 0.007-0.010 | 0.009-0.012 | 0.010-0.015 | 0.012–0.017 | 0.014-0.019 | 0.016-0.021 | |
| | ||||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| P | 0 | 100 | 100 | 125 | mm/r | 0,13–0,15 | 0,14–0,16 | 0,15–0,21 | 0,19–0,26 | 0,21–0,31 | 0,26–0,36 | 0,30–0,41 | 0,34–0,46 |
| 1 | 90 | 100 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 2 | 90 | 100 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 3 | 80 | 95 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 4 | 80 | 90 | 110 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 5 | 60 | 80 | 90 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,12–0,22 | 0,14–0,24 | |
| 6 | 60 | 70 | 80 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,12–0,22 | 0,14–0,24 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,06–0,12 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | 0,14–0,19 |
| 2 | 30 | 40 | 50 | mm/r | 0,04–0,08 | 0,06–0,10 | 0,08–0,13 | 0,09–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | |
| 3 | 30 | 40 | 50 | mm/r | 0,04–0,07 | 0,06–0,10 | 0,08–0,13 | 0,09–0,14 | 0,10–0,15 | 0,11–0,16 | 0,12–0,17 | 0,13–0,18 | |
| K | 1 | 80 | 100 | 120 | mm/r | 0,15–0,19 | 0,17–0,20 | 0,19–0,26 | 0,24–0,32 | 0,27–0,40 | 0,32–0,45 | 0,38–0,52 | 0,45–0,59 |
| 2 | 80 | 90 | 100 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
| 3 | 60 | 90 | 120 | mm/r | 0,15–0,18 | 0,16–0,19 | 0,18–0,25 | 0,22–0,30 | 0,25–0,37 | 0,30–0,42 | 0,35–0,48 | 0,40–0,54 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?