Name: Wendeschneidplatten für KDMB • KDMB-LD
SKU: 4177651
Rating: 0 (0 reviews)

Insert Selection

KDMB Ball Nose Platform • .250"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	.E..GP	KC515M	–	–
H1	.E..GP	KC515M	.E..GP	KC515M	–	–

KDMB Ball Nose Platform • .312"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	–	–	–	–
K3	.E..GP	KC515M	–	–	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	–	–
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .375"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	–	–
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .500"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • .625"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .750"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • 1.00"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • 1.25"

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	–	–	–	–
K3	.E..GP	KC515M	–	–	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

Weitere InformationenView Less

Feeds

KDMB Ball Nose • .250"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .125 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .050 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .025 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

At .013 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.006	.008	.015	.004	.006	.011	.004	.005	.010	.004	.005	.009	.004	.005	.009	.E..LD
.E..GP	.006	.008	.015	.004	.006	.011	.004	.005	.010	.004	.005	.009	.004	.005	.009	.E..GP

KDMB Ball Nose • .312"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .156 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .047 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .031 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

At .016 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

KDMB Ball Nose • .375"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .188 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .056 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .038 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

At .019 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

KDMB Ball Nose • .500"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .250 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .075 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .050 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

At .025 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • .625"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .313 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .094 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .063 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .031 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • .750"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .375 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .113 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .075 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .038 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • 1.00"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .500 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .150 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .100 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .050 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • 1.25"

	Eksenel Kesme Derinliğinde (ap) İşleme Çapı (Dw)
D1 maks

At .625 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .188 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .125 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

At .063 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

Weitere InformationenView Less

Speeds

Recommended Starting Speeds [SFM]

Malzeme grubu		K115M			KC505M			KC515M			KC530M
P	1	–	–	–	–	–	–	1080	960	840	900	780	660
	2	–	–	–	–	–	–	1020	900	780	780	660	540
	3	–	–	–	–	–	–	900	780	660	660	600	540
	4	–	–	–	1180	860	710	780	660	540	600	540	480
	5	–	–	–	1180	860	710	660	540	420	540	480	420
	6	–	–	–	1140	780	620	540	420	360	420	360	300
M	1	–	–	–	–	–	–	1080	900	780	900	720	600
	2	–	–	–	–	–	–	900	720	540	600	480	420
	3	–	–	–	–	–	–	720	600	480	480	420	360
K	1	720	600	480	–	–	–	1440	1080	720	–	–	–
	2	600	480	360	–	–	–	1080	840	600	–	–	–
	3	360	300	240	–	–	–	480	360	240	–	–	–
N	1–2	1440	1080	720	–	–	–	–	–	–	–	–	–
	3	960	720	600	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–
	4	300	230	160	–	–	–	–	–	–	260	200	170
H	1	–	–	–	860	670	550	550	400	310	–	–	–

Weitere InformationenView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

Material Nummer	4177651
ISO Katalog Nummer	KDMB0312M0ERLD
ANSI Katalog Nummer	KDMB0312M0ERLD
Sorte	KNS10
[W] Schnittbreite	7.938 mm
[W] Schnittbreite	.312 in
[S] Dicke der Wendeschneidplatte	2 mm
[S] Dicke der Wendeschneidplatte	.0787 in
[RC] Eckenradiusmitte	3.97 mm
[RC] Eckenradiusmitte	.1563 in
Mittlere Spandicke [HM]	0.05 mm
Mittlere Spandicke [HM]	.002 in

Produktvorschläge

Product Family suggestions

Vertriebsteam kontaktieren

Notifications

Vertriebsteam kontaktieren

Produkt ähnlich wie:

Wendeschneidplatten für KDMB • KDMB-LD