Produkt ähnlich wie:
Round Inserts for KDM • RDHX-LN
Indexable Inserts • RD.X07...
Material Nummer1775983
ISO Katalog NummerRDHX0702M0SLNANSI Katalog NummerRDHX0702M0SLN
- P Stahl
- K Gusseisen
- N NE-Metalle
- H Gehärtete Werkstoffe
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Nummer | 1775983 |
ISO Katalog Nummer | RDHX0702M0SLN |
ANSI Katalog Nummer | RDHX0702M0SLN |
Sorte | KC510M |
[D] Wendeschneidplatten-Größe (Inkreis) | 7 mm |
[D] Wendeschneidplatten-Größe (Inkreis) | .275 in |
[S] Dicke der Wendeschneidplatte | 2.38 mm |
[S] Dicke der Wendeschneidplatte | .0937 in |
Mittlere Spandicke [HM] | 0.066 mm |
Mittlere Spandicke [HM] | .0026 in |
Werkstoffe
- Stahl
- Gusseisen
- NE-Metalle
- Gehärtete Werkstoffe
Features and benefits
- Die LN-Geometrie ist die erste Wahl für hochfeste Stähle und die Hartbearbeitung bei Härten von bis zu 55 HRC.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
Insert Selection
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .F..LP | KC522M | .F..LP | KC725M | .S..LN | KC725M |
P3–P4 | .S..LN | KCPM20 | .S..LN | KC522M | .S..LN | KC725M |
P5–P6 | .S..LN | KC510M | .S..LN | KCPM20 | .S..LN | KCPM20 |
M1–M2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
M3 | .F..LP | KC725M | – | – | – | – |
K1–K2 | .F..LP | KC510M | .S..LN | KC510M | .S..LN | KC510M |
K3 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KC510M |
N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
S1–S2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
S3 | .F..LP | KC725M | – | – | – | – |
S4 | .F..LP | KC725M | – | – | – | – |
H1 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KCPM20 |
Feeds
bei einer axialen Schnitttiefe von 3,50 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,08 | 0,13 | 0,33 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,22 | 0,05 | 0,08 | 0,20 | 0,05 | 0,08 | 0,20 | .F..LP |
.S..LN | 0,14 | 0,41 | 0,68 | 0,11 | 0,31 | 0,51 | 0,09 | 0,27 | 0,44 | 0,09 | 0,25 | 0,41 | 0,09 | 0,24 | 0,41 | .S..LN |
.T..LN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .T..LN |
bei einer axialen Schnitttiefe von 1,75 (ap)
Light | General | Heavy |
Bei einer axialen Schnitttiefe von 1,00 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,10 | 0,15 | 0,39 | 0,07 | 0,12 | 0,29 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,24 | 0,06 | 0,09 | 0,23 | .F..LP |
.S..LN | 0,17 | 0,47 | 0,79 | 0,12 | 0,35 | 0,59 | 0,11 | 0,31 | 0,51 | 0,10 | 0,29 | 0,48 | 0,10 | 0,28 | 0,47 | .S..LN |
.T..LN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .T..LN |
Bei einer axialen Schnitttiefe von 0,50 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,16 | 0,26 | 0,65 | 0,12 | 0,19 | 0,49 | 0,11 | 0,17 | 0,42 | 0,10 | 0,16 | 0,40 | 0,10 | 0,16 | 0,39 | .F..LP |
.S..LN | 0,28 | 0,80 | 1,33 | 0,21 | 0,59 | 0,99 | 0,18 | 0,52 | 0,86 | 0,17 | 0,48 | 0,81 | 0,17 | 0,47 | 0,79 | .S..LN |
.T..LN | 0,33 | 0,83 | 1,33 | 0,25 | 0,62 | 0,99 | 0,22 | 0,54 | 0,86 | 0,20 | 0,50 | 0,81 | 0,20 | 0,49 | 0,79 | .T..LN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | 0,12 | 0,19 | 0,48 | 0,09 | 0,14 | 0,36 | 0,08 | 0,12 | 0,31 | 0,07 | 0,12 | 0,29 | 0,07 | 0,11 | 0,29 | .F..LP |
.S..LN | 0,21 | 0,58 | 0,98 | 0,15 | 0,44 | 0,73 | 0,13 | 0,38 | 0,63 | 0,13 | 0,36 | 0,59 | 0,12 | 0,35 | 0,58 | .S..LN |
.T..LN | 0,24 | 0,61 | 0,98 | 0,18 | 0,45 | 0,73 | 0,16 | 0,40 | 0,63 | 0,15 | 0,37 | 0,59 | 0,15 | 0,36 | 0,58 | .T..LN |
At .138 Axial Depth of Cut (ap)
Light | General | Heavy |
At .069 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .003 | .005 | .014 | .003 | .004 | .010 | .002 | .003 | .009 | .002 | .003 | .008 | .002 | .003 | .008 | .F..LP |
.S..LN | .006 | .016 | .028 | .004 | .012 | .020 | .004 | .010 | .018 | .003 | .010 | .016 | .003 | .010 | .016 | .S..LN |
.T..LN | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .T..LN |
At .034 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .004 | .006 | .016 | .003 | .005 | .012 | .003 | .004 | .010 | .002 | .004 | .009 | .002 | .004 | .009 | .F..LP |
.S..LN | .007 | .019 | .032 | .005 | .014 | .023 | .004 | .012 | .020 | .004 | .011 | .019 | .004 | .011 | .018 | .S..LN |
.T..LN | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .T..LN |
At .017 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .007 | .011 | .028 | .005 | .008 | .021 | .005 | .007 | .018 | .004 | .007 | .017 | .004 | .007 | .017 | .F..LP |
.S..LN | .012 | .034 | .059 | .009 | .025 | .042 | .008 | .022 | .036 | .007 | .020 | .034 | .007 | .020 | .033 | .S..LN |
.T..LN | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .T..LN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.F..LP | .005 | .008 | .021 | .004 | .006 | .015 | .003 | .005 | .013 | .003 | .005 | .012 | .003 | .005 | .012 | .F..LP |
.S..LN | .009 | .025 | .042 | .006 | .018 | .031 | .006 | .016 | .027 | .005 | .015 | .025 | .005 | .015 | .024 | .S..LN |
.T..LN | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .T..LN |
Speeds
Empfohlene Startwerte für Schnittgeschwindigkeit [m/min]
Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 440 | 360 | 310 |
2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 270 | 225 | 190 | |
3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 245 | 205 | 170 | |
4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 185 | 160 | 130 | |
5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 255 | 205 | 175 | |
6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 150 | 125 | – | |
M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 285 | 235 | 200 |
2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 260 | 220 | 185 | |
3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 195 | 160 | – | |
K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 275 | 235 | 195 |
2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 220 | 180 | 160 | |
3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 185 | 150 | 130 | |
N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
3 | 695 | 640 | 585 | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1440 | 1180 | 1010 |
2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 890 | 740 | 620 | |
3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 800 | 670 | 560 | |
4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 600 | 520 | 430 | |
5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 830 | 680 | 580 | |
6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 500 | 410 | – | |
M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 940 | 770 | 650 |
2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 850 | 720 | 600 | |
3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 640 | 530 | – | |
K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 910 | 770 | 640 |
2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 720 | 590 | 520 | |
3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 600 | 500 | 420 | |
N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use